STM32 Nucleo-F091RC
Support for the STM32 Nucleo-F091RC. More...
Detailed Description
Support for the STM32 Nucleo-F091RC.
Overview
The Nucleo-F091RC is a board from ST's Nucleo family supporting a ARM Cortex-M0 STM32F091RC microcontroller with 32KiB of RAM and 256KiB of Flash.
You can find general information about the Nucleo64 boards on the STM32 Nucleo-64 page.
Hardware
Pinout
Pinout for the Nucleo-F091RC (from user manual UM1724, http://www.st.com/resource/en/user_manual/dm00105823.pdf, page 29)
MCU
| MCU | STM32F091RC |
|---|---|
| Family | ARM Cortex-M0 |
| Vendor | ST Microelectronics |
| RAM | 32KiB |
| Flash | 256KiB |
| Frequency | up to 48MHz |
| FPU | no |
| Timers | 12 (8x 16-bit, 1x 32-bit [TIM2], 1x Systick, 2x watchdog) |
| ADCs | 1x 12-bit (up to 16 channels) |
| UARTs | 8 |
| SPIs | 2 |
| I2Cs | 2 |
| CAN | 1 |
| Vcc | 2.0V - 3.6V |
| Datasheet | Datasheet |
| Reference Manual | Reference Manual |
| Programming Manual | Programming Manual |
| Board Manual | Board Manual |
RIOT static pin mapping
please refer to this document for the pin mapping as implemenented in boards/nucleo-f091/include/periph_conf.h
User Interface
1 Button:
| NAME | USER |
|---|---|
| Pin | PC13 |
1 LEDs:
| NAME | LD2 |
|---|---|
| Color | green |
| Pin | PA5 |
Implementation Status
| Device | ID | Supported | Comments |
|---|---|---|---|
| MCU | STM32F091RC | partly | Energy saving modes not fully utilized |
| Low-level driver | GPIO | no | |
| PWM | no | ||
| UART | full | ||
| I2C | no | ||
| SPI | no | ||
| USB | no | ||
| Timer | full |
Flashing the Board
A detailed description about the flashing process can be found on the guides page. The board name for the Nucleo-F091RC is nucleo-f091rc.
Files | |
| file | periph_conf.h |
| Peripheral MCU configuration for the nucleo-f091rc board. | |
