STM32 Nucleo-F302R8
Support for the STM32 Nucleo-F302R8. More...
Detailed Description
Support for the STM32 Nucleo-F302R8.
Overview
The Nucleo-F302R8 is a board from ST's Nucleo family supporting a ARM Cortex-M4 STM32F302R8 microcontroller with 16KiB of RAM and 64KiB of Flash.
You can find general information about the Nucleo64 boards on the STM32 Nucleo-64 page.
Hardware
Pinout
Pinout for the Nucleo-F302R8 (from user manual UM1724, http://www.st.com/resource/en/user_manual/dm00105823.pdf, page 30)
MCU
| MCU | STM32F302R8 |
|---|---|
| Family | ARM Cortex-M4F |
| Vendor | ST Microelectronics |
| RAM | 16KiB |
| Flash | 64KiB |
| Frequency | up to 72MHz |
| FPU | yes |
| Timers | 9 (5x 16-bit, 1x 32-bit [TIM2], 2x watchdog, 1x systick) |
| ADCs | 1 with selectable resolution (6,8,10,12-bit) |
| UARTs | 3 |
| SPIs | 2 |
| I2Cs | 3 |
| RTC | 1 |
| CAN | 1 |
| USB | 1 |
| Vcc | 2.0V - 3.6V |
| Datasheet | Datasheet |
| Reference Manual | Reference Manual |
| Programming Manual | Programming Manual |
| Board Manual | Board Manual |
Implementation Status
| Device | ID | Supported | Comments |
|---|---|---|---|
| MCU | STM32F302R8 | partly | Energy saving modes not fully utilized |
| Low-level driver | GPIO | yes | |
| PWM | one PWM (D5) | ||
| UART | three UART | ||
| I2C | no | ||
| SPI | one SPI (SPI2) | ||
| USB | no | ||
| Timer | one 32 timer (TIM2) |
Flashing the Board
A detailed description about the flashing process can be found on the guides page. The board name for the Nucleo-F302R8 is nucleo-f302r8.
Files | |
| file | periph_conf.h |
| Peripheral MCU configuration for the nucleo-f302r8 board. | |
