periph_conf_common.h File Reference

Peripheral MCU configuration for the iotlab-m3 board. More...

Detailed Description

Peripheral MCU configuration for the iotlab-m3 board.

Author

Thomas Eichinger thoma.nosp@m.s.ei.nosp@m.ching.nosp@m.er@f.nosp@m.u-ber.nosp@m.lin..nosp@m.de

Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de

Definition in file periph_conf_common.h.

#include "periph_cpu.h"
#include "clk_conf.h"

Include dependency graph for periph_conf_common.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

#define	CONFIG_BOARD_HAS_LSE   1
#define	CONFIG_BOARD_HAS_HSE   1
#define	CONFIG_CLOCK_HSE   MHZ(16)

ADC configuration
#define	ADC_NUMOF   ARRAY_SIZE(adc_config)
static const adc_conf_t	adc_config []

DMA streams configuration
#define	DMA_0_ISR   isr_dma1_channel4
#define	DMA_1_ISR   isr_dma1_channel6
#define	DMA_NUMOF   ARRAY_SIZE(dma_config)
static const dma_conf_t	dma_config []

Timer configuration
#define	TIMER_0_ISR   isr_tim2
#define	TIMER_1_ISR   isr_tim3
#define	TIMER_NUMOF   ARRAY_SIZE(timer_config)
static const timer_conf_t	timer_config []

UART configuration
#define	UART_0_ISR   (isr_usart1)
#define	UART_1_ISR   (isr_usart2)
#define	UART_NUMOF   ARRAY_SIZE(uart_config)
static const uart_conf_t	uart_config []

Real time counter configuration
#define	RTT_FREQUENCY   (RTT_MAX_FREQUENCY) /* in Hz */

I2C configuration
#define	I2C_0_ISR   isr_i2c1_ev
#define	I2C_NUMOF   ARRAY_SIZE(i2c_config)
static const i2c_conf_t	i2c_config []

Variable Documentation

adc_config

const adc_conf_t adc_config[]

static

Initial value:

= {
    { GPIO_PIN(PORT_A,3), 0, 3  },
    { GPIO_UNDEF        , 0, 16 },
    { GPIO_UNDEF        , 0, 17 }
}

Definition at line 44 of file periph_conf_common.h.

dma_config

const dma_conf_t dma_config[]

static

Initial value:

= {
    { .stream = 3 },    
    { .stream = 5 },    
}

Definition at line 57 of file periph_conf_common.h.

i2c_config

const i2c_conf_t i2c_config[]

static

Initial value:

= {
    {
        .dev            = I2C1,
        .speed          = I2C_SPEED_NORMAL,
        .scl_pin        = GPIO_PIN(PORT_B, 6),
        .sda_pin        = GPIO_PIN(PORT_B, 7),
        .bus            = APB1,
        .rcc_mask       = RCC_APB1ENR_I2C1EN,
        .clk            = CLOCK_APB1,
        .irqn           = I2C1_EV_IRQn
    }
}

Definition at line 145 of file periph_conf_common.h.

timer_config

const timer_conf_t timer_config[]

static

Initial value:

= {
    {
        .dev      = TIM2,
        .max      = 0x0000ffff,
        .rcc_mask = RCC_APB1ENR_TIM2EN,
        .bus      = APB1,
        .irqn     = TIM2_IRQn
    },
    {
        .dev      = TIM3,
        .max      = 0x0000ffff,
        .rcc_mask = RCC_APB1ENR_TIM3EN,
        .bus      = APB1,
        .irqn     = TIM3_IRQn
    }
}

Definition at line 72 of file periph_conf_common.h.

uart_config

const uart_conf_t uart_config[]

static

Initial value:

= {
    {
        .dev      = USART1,
        .rcc_mask = RCC_APB2ENR_USART1EN,
        .rx_pin   = GPIO_PIN(PORT_A, 10),
        .tx_pin   = GPIO_PIN(PORT_A, 9),
        .bus      = APB2,
        .irqn     = USART1_IRQn,
 
 
 
 
    },
    {
        .dev      = USART2,
        .rcc_mask = RCC_APB1ENR_USART2EN,
        .rx_pin   = GPIO_PIN(PORT_A, 3),
        .tx_pin   = GPIO_PIN(PORT_A, 2),
        .bus      = APB1,
        .irqn     = USART2_IRQn,
 
 
 
 
    }
}

Definition at line 99 of file periph_conf_common.h.