Device driver interface for the LIS3DH accelerometer. More...

Detailed Description

Device driver interface for the LIS3DH accelerometer.

Author: Joakim Nohlgård joaki.nosp@m.m.no.nosp@m.hlgar.nosp@m.d@ei.nosp@m.stec..nosp@m.se

Definition in file lis3dh.h.

#include <stdint.h>
#include "periph/spi.h"
#include "periph/gpio.h"

Include dependency graph for lis3dh.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Data Structures
struct	lis3dh_params_t
	Configuration parameters for LIS3DH devices. More...

struct	lis3dh_t
	Device descriptor for LIS3DH sensors. More...

struct	lis3dh_data_t
	Result vector for accelerometer measurement. More...

Macros
#define	LIS3DH_WHO_AM_I_RESPONSE (0x33)
	Identifier register value. More...

#define	LIS3DH_AXES_XYZ (LIS3DH_CTRL_REG1_XYZEN_MASK)
	Convenience macro for enabling all axes.

#define	LIS3DH_ADC_DATA_SIZE (2U)
	Length of scalar measurement data in bytes.

Functions
int	lis3dh_init (lis3dh_t dev, const lis3dh_params_t params)
	Initialize a LIS3DH sensor instance. More...

int	lis3dh_read_xyz (const lis3dh_t dev, lis3dh_data_t acc_data)
	Read 3D acceleration data from the accelerometer. More...

int	lis3dh_read_aux_adc1 (const lis3dh_t dev, int16_t out)
	Read auxiliary ADC channel 1 data from the accelerometer. More...

int	lis3dh_read_aux_adc2 (const lis3dh_t dev, int16_t out)
	Read auxiliary ADC channel 2 data from the accelerometer. More...

int	lis3dh_read_aux_adc3 (const lis3dh_t dev, int16_t out)
	Read auxiliary ADC channel 3 data from the accelerometer. More...

int	lis3dh_set_aux_adc (const lis3dh_t *dev, const uint8_t enable, const uint8_t temperature)
	Turn on/off power to the auxiliary ADC in LIS3DH. More...

int	lis3dh_set_axes (const lis3dh_t *dev, const uint8_t axes)
	Enable/disable accelerometer axes. More...

int	lis3dh_set_fifo (const lis3dh_t *dev, const uint8_t mode, const uint8_t watermark)
	Enable/disable the FIFO. More...

int	lis3dh_set_odr (const lis3dh_t *dev, const uint8_t odr)
	Set the output data rate of the sensor. More...

int	lis3dh_set_scale (lis3dh_t *dev, const uint8_t scale)
	Set the full scale range of the sensor. More...

int	lis3dh_set_int1 (const lis3dh_t *dev, const uint8_t mode)
	Set INT1 pin function. More...

int	lis3dh_get_fifo_level (const lis3dh_t *dev)
	Get the current number of elements in the FIFO. More...

LIS3DH hardware register addresses
#define	LIS3DH_REG_STATUS_AUX (0x07)

#define	LIS3DH_REG_OUT_AUX_ADC1_L (0x08)

#define	LIS3DH_REG_OUT_AUX_ADC1_H (0x09)

#define	LIS3DH_REG_OUT_AUX_ADC2_L (0x0A)

#define	LIS3DH_REG_OUT_AUX_ADC2_H (0x0B)

#define	LIS3DH_REG_OUT_AUX_ADC3_L (0x0C)

#define	LIS3DH_REG_OUT_AUX_ADC3_H (0x0D)

#define	LIS3DH_REG_INT_COUNTER_REG (0x0E)

#define	LIS3DH_REG_WHO_AM_I (0x0F)

#define	LIS3DH_REG_TEMP_CFG_REG (0x1F)

#define	LIS3DH_REG_CTRL_REG1 (0x20)

#define	LIS3DH_REG_CTRL_REG2 (0x21)

#define	LIS3DH_REG_CTRL_REG3 (0x22)

#define	LIS3DH_REG_CTRL_REG4 (0x23)

#define	LIS3DH_REG_CTRL_REG5 (0x24)

#define	LIS3DH_REG_CTRL_REG6 (0x25)

#define	LIS3DH_REG_REFERENCE (0x26)

#define	LIS3DH_REG_STATUS_REG (0x27)

#define	LIS3DH_REG_OUT_X_L (0x28)

#define	LIS3DH_REG_OUT_X_H (0x29)

#define	LIS3DH_REG_OUT_Y_L (0x2A)

#define	LIS3DH_REG_OUT_Y_H (0x2B)

#define	LIS3DH_REG_OUT_Z_L (0x2C)

#define	LIS3DH_REG_OUT_Z_H (0x2D)

#define	LIS3DH_REG_FIFO_CTRL_REG (0x2E)

#define	LIS3DH_REG_FIFO_SRC_REG (0x2F)

#define	LIS3DH_REG_INT1_CFG (0x30)

#define	LIS3DH_REG_INT1_SOURCE (0x31)

#define	LIS3DH_REG_INT1_THS (0x32)

#define	LIS3DH_REG_INT1_DURATION (0x33)

#define	LIS3DH_REG_CLICK_CFG (0x38)

#define	LIS3DH_REG_CLICK_SRC (0x39)

#define	LIS3DH_REG_CLICK_THS (0x3A)

#define	LIS3DH_REG_TIME_LIMIT (0x3B)

#define	LIS3DH_REG_TIME_LATENCY (0x3C)

#define	LIS3DH_REG_TIME_WINDOW (0x3D)

TEMP_CFG_REG bitfield macros
#define	LIS3DH_TEMP_CFG_REG_ADC_PD_MASK (1 << 7)
	ADC enable. More...

#define	LIS3DH_TEMP_CFG_REG_TEMP_EN_MASK (1 << 6)
	Temperature sensor (T) enable. More...

CTRL_REG1 bitfield macros
#define	LIS3DH_CTRL_REG1_ODR_SHIFT (4)
	ODR global shift.

#define	LIS3DH_CTRL_REG1_ODR3_MASK (1 << (LIS3DH_CTRL_REG1_ODR_SHIFT + 3))
	ODR fourth bit mask.

#define	LIS3DH_CTRL_REG1_ODR2_MASK (1 << (LIS3DH_CTRL_REG1_ODR_SHIFT + 2))
	ODR third bit mask.

#define	LIS3DH_CTRL_REG1_ODR1_MASK (1 << (LIS3DH_CTRL_REG1_ODR_SHIFT + 1))
	ODR second bit mask.

#define	LIS3DH_CTRL_REG1_ODR0_MASK (1 << LIS3DH_CTRL_REG1_ODR_SHIFT)
	ODR first bit mask.

#define	LIS3DH_CTRL_REG1_ODR_MASK
	Output data rate (ODR) selection bitfield. More...

#define	LIS3DH_CTRL_REG1_LPEN_MASK (1 << 3)
	Low power mode enable. More...

#define	LIS3DH_CTRL_REG1_ZEN_SHIFT (2)
	Z enable bit offset.

#define	LIS3DH_CTRL_REG1_ZEN_MASK (1 << LIS3DH_CTRL_REG1_ZEN_SHIFT)
	Z axis enable. More...

#define	LIS3DH_CTRL_REG1_YEN_SHIFT (1)
	Y enable bit offset.

#define	LIS3DH_CTRL_REG1_YEN_MASK (1 << LIS3DH_CTRL_REG1_YEN_SHIFT)
	Y axis enable. More...

#define	LIS3DH_CTRL_REG1_XEN_SHIFT (0)
	X enable bit offset.

#define	LIS3DH_CTRL_REG1_XEN_MASK (1 << LIS3DH_CTRL_REG1_XEN_SHIFT)
	X axis enable. More...

#define	LIS3DH_CTRL_REG1_XYZEN_SHIFT (0)
	XYZ enable bitfield offset.

#define	LIS3DH_CTRL_REG1_XYZEN_MASK
	X, Y, Z enable bitfield mask. More...

#define	LIS3DH_AXES_X (LIS3DH_CTRL_REG1_XEN_MASK)
	enable X axis (Use when calling lis3dh_set_axes())

#define	LIS3DH_AXES_Y (LIS3DH_CTRL_REG1_YEN_MASK)
	enable Y axis (Use when calling lis3dh_set_axes())

#define	LIS3DH_AXES_Z (LIS3DH_CTRL_REG1_ZEN_MASK)
	enable Z axis (Use when calling lis3dh_set_axes())

CTRL_REG2 bitfield macros
#define	LIS3DH_CTRL_REG2_HPM1_MASK (1 << 7)
	High pass filter mode selection second bit. More...

#define	LIS3DH_CTRL_REG2_HPM0_MASK (1 << 6)
	High pass filter mode selection first bit. More...

#define	LIS3DH_CTRL_REG2_HPCF2_MASK (1 << 5)
	High pass filter cut off frequency selection second bit.

#define	LIS3DH_CTRL_REG2_HPCF1_MASK (1 << 4)
	High pass filter cut off frequency selection second bit.

#define	LIS3DH_CTRL_REG2_FDS_MASK (1 << 3)
	Filtered data selection. More...

#define	LIS3DH_CTRL_REG2_HPCLICK_MASK (1 << 2)
	High pass filter enabled for CLICK function. More...

#define	LIS3DH_CTRL_REG2_HPIS2_MASK (1 << 1)
	High pass filter enabled for AOI function on interrupt 2, second bit. More...

#define	LIS3DH_CTRL_REG2_HPIS1_MASK (1 << 0)
	High pass filter enabled for AOI function on interrupt 2, first bit. More...

CTRL_REG3 bitfield macros
#define	LIS3DH_CTRL_REG3_I1_CLICK_MASK (1 << 7)
	CLICK interrupt on INT1. More...

#define	LIS3DH_CTRL_REG3_I1_AOI1_MASK (1 << 6)
	AOI1 interrupt on INT1. More...

#define	LIS3DH_CTRL_REG3_I1_AOI2_MASK (1 << 5)
	AOI2 interrupt on INT1. More...

#define	LIS3DH_CTRL_REG3_I1_DRDY1_MASK (1 << 4)
	DRDY1 interrupt on INT1. More...

#define	LIS3DH_CTRL_REG3_I1_DRDY2_MASK (1 << 3)
	DRDY2 interrupt on INT1. More...

#define	LIS3DH_CTRL_REG3_I1_WTM_MASK (1 << 2)
	FIFO Watermark interrupt on INT1. More...

#define	LIS3DH_CTRL_REG3_I1_OVERRUN_MASK (1 << 1)
	FIFO Overrun interrupt on INT1. More...

CTRL_REG4 bitfield macros
#define	LIS3DH_CTRL_REG4_BDU_MASK (1 << 7)
	Block data update (BDU) bit mask. More...

#define	LIS3DH_CTRL_REG4_BDU_ENABLE (LIS3DH_CTRL_REG4_BDU_MASK)
	Block data update (BDU) enable.

#define	LIS3DH_CTRL_REG4_BDU_DISABLE (0)
	Block data update (BDU) disable.

#define	LIS3DH_CTRL_REG4_BLE_MASK (1 << 6)
	Big/little endian bit mask. More...

#define	LIS3DH_CTRL_REG4_BLE_LITTLE_ENDIAN (0)
	Big/little endian little endian mode.

#define	LIS3DH_CTRL_REG4_BLE_BIG_ENDIAN (LIS3DH_CTRL_REG4_BLE_MASK)
	Big/little endian big endian mode.

#define	LIS3DH_CTRL_REG4_FS1_MASK (1 << 5)
	Full scale selection mask second bit.

#define	LIS3DH_CTRL_REG4_FS0_MASK (1 << 4)
	Full scale selection mask first bit.

#define	LIS3DH_CTRL_REG4_FS_MASK
	Full scale selection mask. More...

#define	LIS3DH_CTRL_REG4_SCALE_2G (0)
	Scale register value: +/- 2G.

#define	LIS3DH_CTRL_REG4_SCALE_4G (LIS3DH_CTRL_REG4_FS0_MASK)
	Scale register value: +/- 4G.

#define	LIS3DH_CTRL_REG4_SCALE_8G (LIS3DH_CTRL_REG4_FS1_MASK)
	Scale register value: +/- 8G.

#define	LIS3DH_CTRL_REG4_SCALE_16G (LIS3DH_CTRL_REG4_FS1_MASK \| LIS3DH_CTRL_REG4_FS0_MASK)
	Scale: +/- 16G.

#define	LIS3DH_CTRL_REG4_HR_MASK (1 << 3)
	High resolution output mode. More...

#define	LIS3DH_CTRL_REG4_ST1_MASK (1 << 2)
	Self test enable second bit mask. More...

#define	LIS3DH_CTRL_REG4_ST0_MASK (1 << 1)
	Self test enable first bit mask.

#define	LIS3DH_CTRL_REG4_SIM_MASK (1 << 0)
	SPI serial interface mode selection. More...

#define	LIS3DH_CTRL_REG5_REBOOT_MASK (1 << 7)
	Reboot memory content. More...

#define	LIS3DH_CTRL_REG5_FIFO_EN_MASK (1 << 6)
	FIFO enable. More...

#define	LIS3DH_CTRL_REG5_LIR_I1_MASK (1 << 3)
	Latch interrupt request on INT1. More...

#define	LIS3DH_CTRL_REG5_D4D_I1_MASK (1 << 2)
	4D enable More...

STATUS_REG bitfield macros
#define	LIS3DH_STATUS_REG_ZYXOR_MASK (1 << 7)
	X, Y or Z axis data overrun. More...

#define	LIS3DH_STATUS_REG_ZOR_MASK (1 << 6)
	Z axis data overrun. More...

#define	LIS3DH_STATUS_REG_YOR_MASK (1 << 5)
	Y axis data overrun. More...

#define	LIS3DH_STATUS_REG_XOR_MASK (1 << 4)
	X axis data overrun. More...

#define	LIS3DH_STATUS_REG_ZYXDA_MASK (1 << 3)
	X, Y or Z axis new data available. More...

#define	LIS3DH_STATUS_REG_ZDA_MASK (1 << 2)
	Z axis new data available. More...

#define	LIS3DH_STATUS_REG_YDA_MASK (1 << 1)
	Y axis new data available. More...

#define	LIS3DH_STATUS_REG_XDA_MASK (1 << 0)
	X axis new data available. More...

FIFO_CTRL_REG bitfield macros
#define	LIS3DH_FIFO_CTRL_REG_FM_SHIFT (6)

#define	LIS3DH_FIFO_CTRL_REG_FM1_MASK (1 << 7)

#define	LIS3DH_FIFO_CTRL_REG_FM0_MASK (1 << 6)

#define	LIS3DH_FIFO_CTRL_REG_FM_MASK

#define	LIS3DH_FIFO_CTRL_REG_TR_MASK (1 << 5)

#define	LIS3DH_FIFO_CTRL_REG_FTH4_MASK (1 << 4)

#define	LIS3DH_FIFO_CTRL_REG_FTH3_MASK (1 << 3)

#define	LIS3DH_FIFO_CTRL_REG_FTH2_MASK (1 << 2)

#define	LIS3DH_FIFO_CTRL_REG_FTH1_MASK (1 << 1)

#define	LIS3DH_FIFO_CTRL_REG_FTH0_MASK (1 << 0)

#define	LIS3DH_FIFO_CTRL_REG_FTH_SHIFT (0)

#define	LIS3DH_FIFO_CTRL_REG_FTH_MASK

FIFO_SRC_REG bitfield macros
#define	LIS3DH_FIFO_SRC_REG_WTM_MASK (1 << 7)

#define	LIS3DH_FIFO_SRC_REG_OVRN_FIFO_MASK (1 << 6)

#define	LIS3DH_FIFO_SRC_REG_EMPTY_MASK (1 << 5)

#define	LIS3DH_FIFO_SRC_REG_FSS4_MASK (1 << 4)

#define	LIS3DH_FIFO_SRC_REG_FSS3_MASK (1 << 3)

#define	LIS3DH_FIFO_SRC_REG_FSS2_MASK (1 << 2)

#define	LIS3DH_FIFO_SRC_REG_FSS1_MASK (1 << 1)

#define	LIS3DH_FIFO_SRC_REG_FSS0_MASK (1 << 0)

#define	LIS3DH_FIFO_SRC_REG_FSS_SHIFT (0)

#define	LIS3DH_FIFO_SRC_REG_FSS_MASK

Register address bitfield macros
#define	LIS3DH_SPI_WRITE_MASK (0 << 7)
	Write to register.

#define	LIS3DH_SPI_READ_MASK (1 << 7)
	The READ bit must be set when reading.

#define	LIS3DH_SPI_MULTI_MASK (1 << 6)
	Multi byte transfers must assert this bit when writing the address.

#define	LIS3DH_SPI_SINGLE_MASK (0 << 6)
	Opposite of LIS3DH_SPI_MULTI_MASK.

#define	LIS3DH_SPI_ADDRESS_MASK (0x3F)
	Mask of the address bits in the address byte during transfers.

FIFO modes.
Used when calling lis3dh_set_fifo()
#define	LIS3DH_FIFO_MODE_BYPASS (0x00 << LIS3DH_FIFO_CTRL_REG_FM_SHIFT)
	FIFO mode: Bypass.

#define	LIS3DH_FIFO_MODE_FIFO (0x01 << LIS3DH_FIFO_CTRL_REG_FM_SHIFT)
	FIFO mode: FIFO.

#define	LIS3DH_FIFO_MODE_STREAM (0x02 << LIS3DH_FIFO_CTRL_REG_FM_SHIFT)
	FIFO mode: Stream.

#define	LIS3DH_FIFO_MODE_STREAM_TO_FIFO (0x03 << LIS3DH_FIFO_CTRL_REG_FM_SHIFT)
	FIFO mode: Stream to FIFO.

Output Data Rates (ODR) macros
Use these when calling lis3dh_set_odr(odr).
#define	LIS3DH_ODR_POWERDOWN (0x00 << LIS3DH_CTRL_REG1_ODR_SHIFT)
	Powerdown mode.

#define	LIS3DH_ODR_1Hz (0x01 << LIS3DH_CTRL_REG1_ODR_SHIFT)
	1Hz mode

#define	LIS3DH_ODR_10Hz (0x02 << LIS3DH_CTRL_REG1_ODR_SHIFT)
	10Hz mode

#define	LIS3DH_ODR_25Hz (0x03 << LIS3DH_CTRL_REG1_ODR_SHIFT)
	25Hz mode

#define	LIS3DH_ODR_50Hz (0x04 << LIS3DH_CTRL_REG1_ODR_SHIFT)
	50Hz mode

#define	LIS3DH_ODR_100Hz (0x05 << LIS3DH_CTRL_REG1_ODR_SHIFT)
	100Hz mode

#define	LIS3DH_ODR_200Hz (0x06 << LIS3DH_CTRL_REG1_ODR_SHIFT)
	200Hz mode

#define	LIS3DH_ODR_400Hz (0x07 << LIS3DH_CTRL_REG1_ODR_SHIFT)
	400Hz mode

#define	LIS3DH_ODR_LP1600Hz (0x08 << LIS3DH_CTRL_REG1_ODR_SHIFT)
	Low power 1600Hz mode.

#define	LIS3DH_ODR_NP1250Hz (0x09 << LIS3DH_CTRL_REG1_ODR_SHIFT)
	Normal mode 1250 Hz. More...

#define	LIS3DH_ODR_LP5000HZ (0x09 << LIS3DH_CTRL_REG1_ODR_SHIFT)
	Low power mode 5000 Hz. More...

Detailed Description

Data Structures

Macros

Functions

LIS3DH hardware register addresses

TEMP_CFG_REG bitfield macros

CTRL_REG1 bitfield macros

CTRL_REG2 bitfield macros

CTRL_REG3 bitfield macros

CTRL_REG4 bitfield macros

STATUS_REG bitfield macros

FIFO_CTRL_REG bitfield macros

FIFO_SRC_REG bitfield macros

Register address bitfield macros

FIFO modes.

Output Data Rates (ODR) macros