board.h

Go to the documentation of this file.

/*
 * Copyright (C) 2015-2020 Freie Universität Berlin
 *
 * This file is subject to the terms and conditions of the GNU Lesser
 * General Public License v2.1. See the file LICENSE in the top level
 * directory for more details.
 */
 
#ifndef BOARD_H
#define BOARD_H
 
#include "cpu.h"
#include "periph_conf.h"
#include "periph/adc.h"
#include "periph/gpio.h"
#include "periph/spi.h"
 
#ifdef __cplusplus
extern "C" {
#endif
 
#if IS_ACTIVE(CONFIG_EFM32_XTIMER_USE_LETIMER)
#define XTIMER_DEV          (TIMER_DEV(1))
#define XTIMER_HZ           (32768UL)
#define XTIMER_WIDTH        (16)
#else
#define XTIMER_DEV          (TIMER_DEV(0))
#define XTIMER_HZ           (250000UL)
#define XTIMER_WIDTH        (16)
#endif
#define XTIMER_CHAN         (0)
#define PB0_PIN             GPIO_PIN(PD, 14)
#define PB1_PIN             GPIO_PIN(PD, 15)
#define LED0_PIN            GPIO_PIN(PD, 12)
#define LED1_PIN            GPIO_PIN(PD, 11)
#define LED0_ON             gpio_set(LED0_PIN)
#define LED0_OFF            gpio_clear(LED0_PIN)
#define LED0_TOGGLE         gpio_toggle(LED0_PIN)
#define LED1_ON             gpio_set(LED1_PIN)
#define LED1_OFF            gpio_clear(LED1_PIN)
#define LED1_TOGGLE         gpio_toggle(LED1_PIN)
#define CORETEMP_ADC        ADC_LINE(0)
#define ENV_SENSE_PIC_ADDR  (0x01)
#define ENV_SENSE_PIC_BIT   (0)
#define BMP280_I2C              I2C_DEV(0)
 
#define BMX280_PARAM_I2C_DEV    BMP280_I2C
#define CCS811_I2C              I2C_DEV(0)
 
#define CCS811_PIC_ADDR         (0x03)
#define CCS811_PIC_EN_BIT       (0x00)
#define CCS811_PIC_WAKE_BIT     (0x01)
 
#define CCS811_PARAM_I2C_DEV    CCS811_I2C
#ifndef ICM20648_ENABLED
#define ICM20648_ENABLED    0
#endif
#define ICM20648_SPI        SPI_DEV(0)
#define ICM20648_PIC_ADDR   (0x00)
#define ICM20648_PIC_EN_BIT (0x00)
#define PIC_INT_WAKE_PIN    GPIO_PIN(PD, 10)
#define PIC_I2C             I2C_DEV(0)
#define PIC_I2C_ADDR        (0x48)
#ifndef RGB_LED1_ENABLED
#define RGB_LED1_ENABLED    1
#endif
#ifndef RGB_LED2_ENABLED
#define RGB_LED2_ENABLED    1
#endif
#ifndef RGB_LED3_ENABLED
#define RGB_LED3_ENABLED    1
#endif
#ifndef RGB_LED4_ENABLED
#define RGB_LED4_ENABLED    1
#endif
#define RGB_LED_ADDR        (0x04)
#define RGB_LED_EN_BIT      (0x00)
#define RGB_LED1_EN_BIT     (0x07)
#define RGB_LED2_EN_BIT     (0x06)
#define RGB_LED3_EN_BIT     (0x05)
#define RGB_LED4_EN_BIT     (0x04)
#ifndef SI1133_ENABLED
#define SI1133_ENABLED      0
#endif
#define SI1133_I2C          I2C_DEV(0)
#define SI7021_I2C              I2C_DEV(0)
 
#define SI70XX_PARAM_I2C_DEV    SI7021_I2C
#ifndef SI7210_ENABLED
#define SI7210_ENABLED      0
#endif
#define SI7210_I2C          I2C_DEV(0)
#ifdef __cplusplus
}
#endif
 
#endif /* BOARD_H */