STM32 Nucleo-F042K6

Support for the STM32 Nucleo-F042K6. More...

Detailed Description

Support for the STM32 Nucleo-F042K6.

Overview

The Nucleo-F042K6 is a board from ST's Nucleo family supporting ARM Cortex-M0 STM32F042K6 microcontroller with 6KiB of RAM and 32KiB of Flash.

Pinout

Pinout for the Nucleo-F042K6 (from ST User Manual, UM1956, https://www.st.com/resource/en/user_manual/um1956-stm32-nucleo32-boards-mb1180-stmicroelectronics.pdf, page 31)

MCU

MCU	STM32F042K6
Family	ARM Cortex-M0
Vendor	ST Microelectronics
RAM	6KiB
Flash	32KiB
Frequency	up to 48MHz
FPU	no
Timers	9 (5x 16-bit, 1x 32, 1x Systick, 2x Watchdog)
ADC	1x 12-bit (10 channels)
UARTs	2 (two USARTs)
SPIs	1
CANs	1
RTC	1
I2Cs	1
Vcc	2.0V - 3.6V
Datasheet	Datasheet
Reference Manual	Reference Manual
Programming Manual	Programming Manual
Board Manual	Board Manual

Flashing the Board Using ST-LINK Removable Media

On-board ST-LINK programmer provides via composite USB device removable media. Copying the HEX file causes reprogramming of the board. This task could be performed manually; however, the cpy2remed (copy to removable media) PROGRAMMER script does this automatically. To program board in this manner, use the command:

make BOARD=nucleo-f042k6 PROGRAMMER=cpy2remed flash

Note

This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates can be found on this STM webpage.

Files
file	periph_conf.h
	Peripheral MCU configuration for the nucleo-f042k6 board.