Board definitions for the rss2 256rfr2 board. More...

Detailed Description

Board definitions for the rss2 256rfr2 board.

Definition in file board.h.

#include "cpu.h"
#include "periph/gpio.h"

Include dependency graph for board.h:

This graph shows which files directly or indirectly include this file:

LED pin definitions and handlers
#define	LED_PORT PORTE

#define	LED_PORT_DDR DDRE

#define	LED0_PIN GPIO_PIN(PORT_E, 4) /* RED */

#define	LED1_PIN GPIO_PIN(PORT_E, 3) /* YELLOW */

#define	LED0_MASK (1 << 4)

#define	LED1_MASK (1 << 3)

#define	LED0_MODE GPIO_OUT

#define	LED0_OFF (LED_PORT \|= LED0_MASK)

#define	LED0_ON (LED_PORT &= ~LED0_MASK)

#define	LED0_TOGGLE (LED_PORT ^= LED0_MASK)

#define	LED1_MODE GPIO_OUT

#define	LED1_OFF (LED_PORT \|= LED1_MASK)

#define	LED1_ON (LED_PORT &= ~LED1_MASK)

#define	LED1_TOGGLE (LED_PORT ^= LED1_MASK)

Usage of LED to turn on when a kernel panic occurs.
#define	LED_PANIC LED0_ON

xtimer configuration values
#define	XTIMER_DEV TIMER_DEV(0)

#define	XTIMER_CHAN (0)

#define	XTIMER_WIDTH (16)

#define	XTIMER_HZ (62500UL)

Indicate Watchdog cleared in bootloader an
AVR CPUs need to reset the Watchdog as fast as possible. This flag indicates that the watchdog is reset in the bootloader and that the MCUSR value is stored in register 0 (r0)
#define	BOOTLOADER_CLEARS_WATCHDOG_AND_PASSES_MCUSR 0

CPU clock scale for avr-rss2
#define	CPU_ATMEGA_CLK_SCALE_INIT CPU_ATMEGA_CLK_SCALE_DIV1

AT24MAC602 configuration