STM32 Nucleo-L433RC
Support for the STM32 Nucleo-L433RC. More...
Detailed Description
Support for the STM32 Nucleo-L433RC.
Overview
The Nucleo-L433RC is a board from ST's Nucleo family supporting a ARM Cortex-M4 STM32L433RC microcontroller with 64KiB of RAM and 256KiB of Flash.
You can find general information about the Nucleo64 boards on the STM32 Nucleo-64 page.
Hardware
Pinout
Pinout for the Nucleo-L433RC (from STM user manual, UM2206, http://www.st.com/resource/en/user_manual/um2206-stm32-nucleo64p-boards-mb1319-stmicroelectronics.pdf, page 37)
MCU
| MCU | STM32L433RC |
|---|---|
| Family | ARM Cortex-M4F |
| Vendor | ST Microelectronics |
| RAM | 64KiB |
| Flash | 256KiB |
| Frequency | up to 80MHz |
| FPU | yes |
| Timers | 11 (2x watchdog, 1 SysTick, 7x 16-bit, 1x 32-bit) |
| ADCs | 1x 12-bit |
| UARTs | 5 (four USARTs and one Low-Power UART) |
| SPIs | 3 |
| I2Cs | 3 |
| RTC | 1 |
| CAN | 1 |
| Vcc | 1.71 V - 3.6V |
| Datasheet | Datasheet |
| Reference Manual | Reference Manual |
| Programming Manual | Programming Manual |
| Board Manual | Board Manual |
Flashing the Board
A detailed description about the flashing process can be found on the guides page. The board name for the Nucleo-L433RC is nucleo-l433rc.
Files | |
| file | periph_conf.h |
| Peripheral MCU configuration for the nucleo-l433rc board. | |
