STM32 Nucleo-L476RG

Support for the STM32 Nucleo-L476RG. More...

Detailed Description

Support for the STM32 Nucleo-L476RG.

Overview

The Nucleo-L476RG is a board from ST's Nucleo family supporting ARM Cortex-M4 STM32L476RG microcontroller with 128KiB of RAM and 1MiB of Flash.

You can find general information about the Nucleo64 boards on the STM32 Nucleo-64 page.

Pinout

Pinout for the Nucleo-L476RG (from STM user manual UM1724, http://www.st.com/resource/en/user_manual/dm00105823.pdf, page 35)

MCU

MCU	STM32L476RG
Family	ARM Cortex-M4F
Vendor	ST Microelectronics
RAM	128KiB
Flash	1MiB
Frequency	up to 80MHz
FPU	yes
Timers	16 (2x watchdog, 1 SysTick, 6x 16-bit, 2x 32-bit [TIM2])
ADCs	3x 12-bit (up to 16 channels)
UARTs	6 (three USARTs, two UARTs and one Low-Power UART)
SPIs	3
I2Cs	3
RTC	1
CAN	1
Vcc	1.71 V - 3.6V
Datasheet	Datasheet
Reference Manual	Reference Manual
Programming Manual	Programming Manual
Board Manual	Board Manual

Flashing the Board

A detailed description about the flashing process can be found on the guides page. The board name for the Nucleo-L476RG is nucleo-l476rg.

Files
file	periph_conf.h
	Peripheral MCU configuration for the nucleo-l476rg board.