API definition for the QMC5883L device driver. More...

Detailed Description

API definition for the QMC5883L device driver.

Author: Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de

Definition in file qmc5883l.h.

#include <stdint.h>
#include "periph/gpio.h"
#include "periph/i2c.h"

Include dependency graph for qmc5883l.h:

This graph shows which files directly or indirectly include this file:

Data Structures
struct	qmc5883l_params_t
	QMC5883L initialization parameters. More...

struct	qmc5883l_t
	QMC5883L device descriptor. More...

Macros
#define	QMC5883L_ADDR (0x0d)
	Static QMC5883L I2C address (can not be changed)

Enumerations
enum	{ QMC5883L_OK , QMC5883L_NODATA , QMC5883L_OVERFLOW , QMC5883L_BUSERR , QMC5883L_NOCFG }
	Error codes used by the QMC5883L driver. More...

enum	qmc5883l_odr_t { QMC5883L_ODR_10HZ = (0u << 2) , QMC5883L_ODR_50HZ = (1u << 2) , QMC5883L_ODR_100HZ = (2u << 2) , QMC5883L_ODR_200HZ = (3u << 2) }
	Output data rate. More...

enum	qmc5883l_rng_t { QMC5883L_RNG_2G = (0u << 4) , QMC5883L_RNG_8G = (1u << 4) }
	Output value range. More...

enum	qmc5883l_osr_t { QMC5883L_OSR_512 = (0u << 6) , QMC5883L_OSR_256 = (1u << 6) , QMC5883L_OSR_128 = (2u << 6) , QMC5883L_OSR_64 = (3u << 6) }
	Over sample rate (bandwidth of internal digital filter) More...

Functions
int	qmc5883l_init (qmc5883l_t dev, const qmc5883l_params_t params)
	Initialize the given QMC5883L magnetic sensor. More...

int	qmc5883l_data_ready (const qmc5883l_t *dev)
	Check if new data is available. More...

int	qmc5883l_read (const qmc5883l_t dev, int16_t data_out)
	Read sampled data from the device [converted to milli-Gauss]. More...

int	qmc5883l_read_raw (const qmc5883l_t dev, int16_t data_out)
	Read RAW data from the device. More...

int	qmc5883l_poweron (const qmc5883l_t *dev)
	Power on the sensor (put it into continuous sampling mode) More...

int	qmc5883l_poweroff (const qmc5883l_t *dev)
	Power off the sensor (put it into standby mode) More...

int	qmc5883l_init_int (const qmc5883l_t dev, gpio_cb_t cb, void arg)
	Initialize data ready (DRDY) interrupt notifications. More...

int	qmc5883l_irq_enable (const qmc5883l_t *dev)
	Enable the data ready (DRDY) interrupt. More...

int	qmc5883l_irq_disable (const qmc5883l_t *dev)
	Disable the data ready (DRDY) interrupt. More...

Data Structures