board.h
Go to the documentation of this file.
1 /*
2  * SPDX-FileCopyrightText: 2019 ML!PA Consulting GmbH
3  * SPDX-License-Identifier: LGPL-2.1-only
4  */
5 
6 #pragma once
7 
19 #include "cpu.h"
20 #include "periph/gpio.h"
21 
22 #ifdef __cplusplus
23 extern "C" {
24 #endif
25 
30 #define AT24MAC_PARAM_I2C_DEV I2C_DEV(1)
31 #define AT24MAC_PARAM_I2C_ADDR (0x5E)
32 #define AT24MAC_PARAM_TYPE AT24MAC4XX
33 #define AT24CXXX_PARAM_I2C I2C_DEV(1)
34 #define AT24CXXX_PARAM_ADDR (0x56)
41 #define ATCA_PARAM_I2C I2C_DEV(1)
48 #define LED0_PIN GPIO_PIN(PC, 18)
49 
50 #define LED_PORT PORT->Group[PC]
51 #define LED0_MASK (1 << 18)
52 
53 #define LED0_ON (LED_PORT.OUTCLR.reg = LED0_MASK)
54 #define LED0_OFF (LED_PORT.OUTSET.reg = LED0_MASK)
55 #define LED0_TOGGLE (LED_PORT.OUTTGL.reg = LED0_MASK)
56 
57 #define LED1_PIN GPIO_PIN(PC, 15)
58 
59 #define LED_PORT PORT->Group[PC]
60 #define LED1_MASK (1 << 15)
61 
62 #define LED1_ON (LED_PORT.OUTCLR.reg = LED1_MASK)
63 #define LED1_OFF (LED_PORT.OUTSET.reg = LED1_MASK)
64 #define LED1_TOGGLE (LED_PORT.OUTTGL.reg = LED1_MASK)
71 #define BTN0_PIN GPIO_PIN(PB, 31)
72 #define BTN0_MODE GPIO_IN_PU
79 #define MTD_0 mtd_dev_get(0)
80 #define MTD_1 mtd_dev_get(1)
81 #define MTD_2 mtd_dev_get(2)
83 #define CONFIG_SDMMC_GENERIC_MTD_OFFSET 2
90 #define XTIMER_WIDTH (32)
91 #define XTIMER_HZ (1000000ul)
94 #ifdef __cplusplus
95 }
96 #endif
97 
gpio.h
Low-level GPIO peripheral driver interface definitions.