periph_conf.h File Reference

Peripheral MCU configuration for the spark-core board. More...

Detailed Description

Peripheral MCU configuration for the spark-core board.

Author

Christian Mehlis mehli.nosp@m.s@in.nosp@m.f.fu-.nosp@m.berl.nosp@m.in.de

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "clk_conf.h"

Include dependency graph for periph_conf.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Timer configuration
#define	TIMER_0_ISR   isr_tim2
#define	TIMER_1_ISR   isr_tim3
#define	TIMER_NUMOF   ARRAY_SIZE(timer_config)
static const timer_conf_t	timer_config []

UART configuration
#define	UART_0_ISR   (isr_usart2)
#define	UART_NUMOF   ARRAY_SIZE(uart_config)
static const uart_conf_t	uart_config []

SPI configuration
#define	SPI_NUMOF   ARRAY_SIZE(spi_config)
static const spi_conf_t	spi_config []

Variable Documentation

spi_config

const spi_conf_t spi_config[]

static

Initial value:

= {
    {
        .dev      = SPI1,
        .mosi_pin = GPIO_PIN(PORT_B, 17),
        .miso_pin = GPIO_PIN(PORT_B, 16),
        .sclk_pin = GPIO_PIN(PORT_B, 15),
        .cs_pin   = SPI_CS_UNDEF,
        .rccmask  = RCC_APB2ENR_SPI1EN,
        .apbbus   = APB2
    }
}

Definition at line 76 of file periph_conf.h.

timer_config

const timer_conf_t timer_config[]

static

Initial value:

= {
    {
        .dev      = TIM2,
        .max      = 0x0000ffff,
        .rcc_mask = RCC_APB1ENR_TIM2EN,
        .bus      = APB1,
        .irqn     = TIM2_IRQn
    },
    {
        .dev      = TIM3,
        .max      = 0x0000ffff,
        .rcc_mask = RCC_APB1ENR_TIM3EN,
        .bus      = APB1,
        .irqn     = TIM3_IRQn
    }
}

Definition at line 29 of file periph_conf.h.

uart_config

const uart_conf_t uart_config[]

static

Initial value:

= {
    {
        .dev      = USART2,
        .rcc_mask = RCC_APB1ENR_USART2EN,
        .rx_pin   = GPIO_PIN(PORT_A, 3),
        .tx_pin   = GPIO_PIN(PORT_A, 2),
        .bus      = APB1,
        .irqn     = USART2_IRQn
    }
}

Definition at line 56 of file periph_conf.h.