STM32 Nucleo-F303K8
Support for the STM32 Nucleo-F303K8. More...
Detailed Description
Support for the STM32 Nucleo-F303K8.
Overview
The Nucleo-F303K8 is a board from ST's Nucleo family supporting a ARM Cortex-M4 STM32F303K8 microcontroller with 12KiB of RAM and 64KiB of ROM.
You can find general information about the Nucleo32 boards on the STM32 Nucleo-32 page.
Pinout
Pinout for the Nucleo-F303K8 (from ST User Manual, UM1956, https://www.st.com/resource/en/user_manual/um1956-stm32-nucleo32-boards-mb1180-stmicroelectronics.pdf, page 31)
Hardware
MCU
| MCU | STM32F303K8 |
|---|---|
| Family | ARM Cortex-M4F |
| Vendor | ST Microelectronics |
| RAM | 12KiB |
| Flash | 64KiB |
| Frequency | up to 72MHz |
| FPU | yes |
| Timers | 8 (4x 16-bit, 1x 32-bit [TIM2], 2x watchdog, 1x Systick) |
| ADCs | 2x 12-bit (9 channels) |
| UARTs | 2 |
| SPIs | 1 |
| I2Cs | 1 |
| RTC | 1 |
| Vcc | 2.0V - 3.6V |
| Datasheet | Datasheet |
| Reference Manual | Reference Manual |
| Programming Manual | Programming Manual |
| Board Manual | Board Manual |
Implementation Status
| Device | ID | Supported | Comments |
|---|---|---|---|
| MCU | STM32F303K8 | partly | Energy saving modes not fully utilized |
| Low-level driver | GPIO | yes | |
| PWM | one PWM | ||
| UART | three UART | ||
| I2C | two I2C | ||
| SPI | two SPI | ||
| USB | no | ||
| Timer | one 32 timer |
Flashing the Board
A detailed description about the flashing process can be found on the guides page. The board name for the Nucleo-F303K8 is nucleo-f303k8.
Files | |
| file | periph_conf.h |
| Peripheral MCU configuration for the nucleo-f303k8 board. | |
