Support for the STM32 Nucleo-F334R8. More...
Support for the STM32 Nucleo-F334R8.
The Nucleo-F334R8 is a board from ST's Nucleo family supporting a ARM Cortex-M4 STM32F334R8 microcontroller with 12KiB of RAM and 64KiB or Flash.
You can find general information about the Nucleo64 boards on the STM32 Nucleo-64 page.
 
| MCU | STM32F334R8 | 
|---|---|
| Family | ARM Cortex-M4F | 
| Vendor | ST Microelectronics | 
| RAM | 12KiB | 
| Flash | 64KiB | 
| Frequency | up to 72MHz | 
| FPU | yes | 
| Timers | 12 (8x 16-bit, 1x 32-bit [TIM2], 1x Systick, 2x watchdog) | 
| ADCs | 2x 12-bit (21 channels) | 
| UARTs | 3 | 
| SPIs | 1 | 
| I2Cs | 1 | 
| RTC | 1 | 
| CAN | 1 | 
| Vcc | 2.0V - 3.6V | 
| Datasheet | Datasheet | 
| Reference Manual | Reference Manual | 
| Programming Manual | Programming Manual | 
| Board Manual | Board Manual | 
| Device | ID | Supported | Comments | 
|---|---|---|---|
| MCU | STM32F334R8 | partly | Energy saving modes not fully utilized | 
| Low-level driver | GPIO | yes | |
| PWM | no | ||
| UART | one UART | ||
| I2C | no | ||
| SPI | one SPI | ||
| USB | no | ||
| Timer | one 32 timer | 
A detailed description about the flashing process can be found on the guides page. The board name for the Nucleo-F334R8 is nucleo-f334r8. 
Files | |
| file | periph_conf.h | 
| Peripheral MCU configuration for the nucleo-f334r8 board.  | |