Software SPI port descriptor definition. More...

Detailed Description

Software SPI port descriptor definition.

Author: Markus Blechschmidt Marku.nosp@m.s.Bl.nosp@m.echsc.nosp@m.hmid.nosp@m.t@haw.nosp@m.-ham.nosp@m.burg..nosp@m.de

Definition in file soft_spi.h.

#include "periph/gpio.h"
#include "periph/spi.h"
#include "mutex.h"

Include dependency graph for soft_spi.h:

This graph shows which files directly or indirectly include this file:

Data Structures
struct	soft_spi_conf_t
	Software SPI port descriptor. More...

Macros
#define	SOFT_SPI_DEV(x) (x)
	Default SPI device access macro.

#define	SOFT_SPI_UNDEF (UINT_MAX)
	Define global value for undefined SPI device.

#define	SOFT_SPI_CS_UNDEF (GPIO_UNDEF)
	Define value for unused CS line.

Typedefs
typedef unsigned int	soft_spi_t
	Default type for SPI devices.

typedef gpio_t	soft_spi_cs_t
	Chip select pin type overlaps with gpio_t so it can be casted to this.

Enumerations
enum	{ SOFT_SPI_OK = 0 , SOFT_SPI_NODEV = -1 , SOFT_SPI_NOCS = -2 , SOFT_SPI_NOMODE = -3 , SOFT_SPI_NOCLK = -4 }
	Status codes used by the SPI driver interface. More...

enum	soft_spi_mode_t { SOFT_SPI_MODE_0 = 0 , SOFT_SPI_MODE_1 , SOFT_SPI_MODE_2 , SOFT_SPI_MODE_3 }
	Available SPI modes, defining the configuration of clock polarity and clock phase. More...

enum	soft_spi_clk_t { SOFT_SPI_CLK_100KHZ = 5 , SOFT_SPI_CLK_1MHZ = 1 , SOFT_SPI_CLK_DEFAULT = 0 }
	Available SPI clock speeds. More...

Functions
void	soft_spi_init (soft_spi_t bus)
	Basic initialization of the given SPI bus. More...

void	soft_spi_init_pins (soft_spi_t bus)
	Initialize the used SPI bus pins, i.e. More...

int	soft_spi_init_cs (soft_spi_t bus, soft_spi_cs_t cs)
	Initialize the given chip select pin. More...

void	soft_spi_acquire (soft_spi_t bus, soft_spi_cs_t cs, soft_spi_mode_t mode, soft_spi_clk_t clk)
	Start a new SPI transaction. More...

void	soft_spi_release (soft_spi_t bus)
	Finish an ongoing SPI transaction by releasing the given SPI bus. More...

uint8_t	soft_spi_transfer_byte (soft_spi_t bus, soft_spi_cs_t cs, bool cont, uint8_t out)
	Transfer one byte on the given SPI bus Currently only the use of MOSI in master mode is implemented. More...

void	soft_spi_transfer_bytes (soft_spi_t bus, soft_spi_cs_t cs, bool cont, const void out, void in, size_t len)
	Transfer a number bytes using the given SPI bus. More...

uint8_t	soft_spi_transfer_reg (soft_spi_t bus, soft_spi_cs_t cs, uint8_t reg, uint8_t out)
	Transfer one byte to/from a given register address. More...

void	soft_spi_transfer_regs (soft_spi_t bus, soft_spi_cs_t cs, uint8_t reg, const void out, void in, size_t len)
	Transfer a number of bytes to/from a given register address. More...

Data Structures