Macros | |
| #define | MAX31865_CFG_VBIAS_ON (0b10000000) | 
| Enable Vbias.  | |
| #define | MAX31865_CFG_CONV_AUTO (0b01000000) | 
| Enable automatic conversion mode.  More... | |
| #define | MAX31865_CFG_1SHOT (0b00100000) | 
| Trigger a single conversion.  More... | |
| #define | MAX31865_CFG_3WIRE (0b00010000) | 
| 3-wire resistor connection  More... | |
| #define | MAX31865_CFG_CLEAR_FAULT (0b00000010) | 
| Clear fault condition.  | |
| #define | MAX31865_CFG_FILTER_50HZ (0b00000001) | 
| Filter out 50Hz if set, or 60Hz otherwise.  More... | |
| #define | MAX31865_CFG_FLTDET_MASK (0b00001100) | 
| Fault detection bit mask.  More... | |
| #define | MAX31865_CFG_FLTDET_IDLE (0b00000000) | 
| No fault detection is running.  | |
| #define | MAX31865_CFG_FLTDET_AUTO_START (0b00000100) | 
| Start a fault detection with an automatic delay (about 550µs)  | |
| #define | MAX31865_CFG_FLTDET_MANU_START (0b00001000) | 
| Start a fault detection with a manually controlled delay.  | |
| #define | MAX31865_CFG_FLTDET_MANU_STOP (0b00001100) | 
| Terminate fault detection with a manually controlled delay.  | |
| #define MAX31865_CFG_1SHOT (0b00100000) | 
Trigger a single conversion.
The automatic conversion mode must be off. Single conversion time is 52ms in 60Hz or 62.5ms in 50Hz filter mode.
Definition at line 94 of file max31865_internal.h.
| #define MAX31865_CFG_3WIRE (0b00010000) | 
3-wire resistor connection
Clear the bit for 2- or 4-wire connections.
Definition at line 101 of file max31865_internal.h.
| #define MAX31865_CFG_CONV_AUTO (0b01000000) | 
Enable automatic conversion mode.
The conversion rate is the same as the selected filter mode, i.e. either 50 or 60Hz.
Definition at line 86 of file max31865_internal.h.
| #define MAX31865_CFG_FILTER_50HZ (0b00000001) | 
Filter out 50Hz if set, or 60Hz otherwise.
Clear the bit for 60Hz filter mode.
Definition at line 113 of file max31865_internal.h.
| #define MAX31865_CFG_FLTDET_MASK (0b00001100) | 
Fault detection bit mask.
To check the status of the fault detection cycle, mask the bits of the configuration register and compare the value with MAX31865_CFG_FLTDET_IDLE, MAX31865_CFG_FLTDET_AUTO_START, MAX31865_CFG_FLTDET_MANU_START or MAX31865_CFG_FLTDET_MANU_START.
Definition at line 124 of file max31865_internal.h.