periph_conf.h File Reference

Configuration of CPU peripherals for the Sodaq LoRaWAN Explorer board. More...

Detailed Description

Configuration of CPU peripherals for the Sodaq LoRaWAN Explorer board.

Author

Alexandre Abadie alexa.nosp@m.ndre.nosp@m..abad.nosp@m.ie@i.nosp@m.nria..nosp@m.fr

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "cfg_clock_default.h"
#include "cfg_rtc_default.h"
#include "cfg_rtt_default.h"
#include "cfg_spi_default.h"
#include "cfg_timer_default.h"
#include "cfg_usbdev_default.h"

Include dependency graph for periph_conf.h:

Go to the source code of this file.

UART configuration
#define	UART_0_ISR   isr_sercom5
#define	UART_1_ISR   isr_sercom4
#define	UART_2_ISR   isr_sercom0
#define	UART_NUMOF   ARRAY_SIZE(uart_config)
static const uart_conf_t	uart_config []

ADC configuration
#define	ADC_PRESCALER   ADC_CTRLB_PRESCALER_DIV512
#define	ADC_NEG_INPUT   ADC_INPUTCTRL_MUXNEG_GND
#define	ADC_GAIN_FACTOR_DEFAULT   ADC_INPUTCTRL_GAIN_DIV2
#define	ADC_REF_DEFAULT   ADC_REFCTRL_REFSEL_INTVCC1
#define	ADC_NUMOF   ARRAY_SIZE(adc_channels)
static const adc_conf_chan_t	adc_channels []

I2C configuration
#define	I2C_NUMOF   ARRAY_SIZE(i2c_config)
static const i2c_conf_t	i2c_config []

Variable Documentation

adc_channels

const adc_conf_chan_t adc_channels[]

static

Initial value:

= {
    
    { .inputctrl = ADC_INPUTCTRL_MUXPOS_PB00 },     
    { .inputctrl = ADC_INPUTCTRL_MUXPOS_PB01 },     
    { .inputctrl = ADC_INPUTCTRL_MUXPOS_PB02 },    
    { .inputctrl = ADC_INPUTCTRL_MUXPOS_PB03 },    
    { .inputctrl = ADC_INPUTCTRL_MUXPOS_PA08 },    
    { .inputctrl = ADC_INPUTCTRL_MUXPOS_PA09 },    
    { .inputctrl = ADC_INPUTCTRL_MUXPOS_PA04 },     
    { .inputctrl = ADC_INPUTCTRL_MUXPOS_PA10 },   
    { .inputctrl = ADC_INPUTCTRL_MUXPOS_PA11 },   
    { .inputctrl = ADC_INPUTCTRL_MUXPOS_PB05 },    
}

Definition at line 99 of file periph_conf.h.

i2c_config

const i2c_conf_t i2c_config[]

static

Initial value:

= {
    {
        .dev      = &(SERCOM1->I2CM),
        .speed    = I2C_SPEED_NORMAL,
        .scl_pin  = GPIO_PIN(PA, 17),
        .sda_pin  = GPIO_PIN(PA, 16),
        .mux      = GPIO_MUX_C,
        .gclk_src = SAM0_GCLK_MAIN,
        .flags    = I2C_FLAG_NONE,
    },
    {
        .dev      = &(SERCOM2->I2CM),
        .speed    = I2C_SPEED_NORMAL,
        .scl_pin  = GPIO_PIN(PA, 9),
        .sda_pin  = GPIO_PIN(PA, 8),
        .mux      = GPIO_MUX_C,
        .gclk_src = SAM0_GCLK_MAIN,
        .flags    = I2C_FLAG_NONE
    }
}

Definition at line 120 of file periph_conf.h.