Shared definitions for MQTT-SN. More...

Detailed Description

Shared definitions for MQTT-SN.

See also: http://mqtt.org/new/wp-content/uploads/2009/06/MQTT-SN_spec_v1.2.pdf

Enumerations
enum	{ MQTTSN_DUP = 0x80 , MQTTSN_QOS_MASK = 0x60 , MQTTSN_QOS_2 = 0x40 , MQTTSN_QOS_1 = 0x20 , MQTTSN_QOS_NEG1 = 0x60 , MQTTSN_QOS_0 = 0x00 , MQTTSN_RETAIN = 0x10 , MQTTSN_WILL = 0x08 , MQTTSN_CS = 0x04 , MQTTSN_TIT_MASK = 0x03 , MQTTSN_TIT_SHORT = 0x02 , MQTTSN_TIT_PREDEF = 0x01 , MQTTSN_TIT_NORMAL = 0x00 }
	MQTT-SN flags. More...

enum	{ MQTTSN_ADVERTISE = 0x00 , MQTTSN_SEARCHGW = 0x01 , MQTTSN_GWINFO = 0x02 , MQTTSN_CONNECT = 0x04 , MQTTSN_CONNACK = 0x05 , MQTTSN_WILLTOPICREQ = 0x06 , MQTTSN_WILLTOPIC = 0x07 , MQTTSN_WILLMSGREQ = 0x08 , MQTTSN_WILLMSG = 0x09 , MQTTSN_REGISTER = 0x0a , MQTTSN_REGACK = 0x0b , MQTTSN_PUBLISH = 0x0c , MQTTSN_PUBACK = 0x0d , MQTTSN_PUBCOMP = 0x0e , MQTTSN_PUBREC = 0x0f , MQTTSN_PUBREL = 0x10 , MQTTSN_SUBSCRIBE = 0x12 , MQTTSN_SUBACK = 0x13 , MQTTSN_UNSUBSCRIBE = 0x14 , MQTTSN_UNSUBACK = 0x15 , MQTTSN_PINGREQ = 0x16 , MQTTSN_PINGRESP = 0x17 , MQTTSN_DISCONNECT = 0x18 , MQTTSN_WILLTOPICUPD = 0x1a , MQTTSN_WILLTOPICRESP = 0x1b , MQTTSN_WILLMSGUPD = 0x1c , MQTTSN_WILLMSGRESP = 0x1d }
	MQTT-SN message types. More...

enum	{ MQTTSN_ACCEPTED = 0x00 , MQTTSN_REJ_CONGESTION = 0x01 , MQTTSN_REJ_INV_TOPIC_ID = 0x02 , MQTTSN_REJ_NOTSUP = 0x03 }
	MQTT-SN return codes. More...

The client ID must contain 1-23 characters
See also MQTT-SN spec v1.2, section 5.3.1
#define	MQTTSN_CLI_ID_MINLEN (1U)

#define	MQTTSN_CLI_ID_MAXLEN (23U)

Enumeration Type Documentation

anonymous enum

MQTT-SN flags.

All MQTT-SN functions only support a sub-set of the available flags. It is up to the user to only supply valid/supported flags to a function.

Refer to the MQTT-SN spec section 5.3.4 for further information.

Enumerator
MQTTSN_DUP	duplicate flag
MQTTSN_QOS_MASK	QoS level mask.
MQTTSN_QOS_2	QoS level 2.
MQTTSN_QOS_1	QoS level 1.
MQTTSN_QOS_NEG1	QoS level -1 (negative 1)
MQTTSN_QOS_0	QoS level 0.
MQTTSN_RETAIN	retain flag
MQTTSN_WILL	will flag, used during CONNECT
MQTTSN_CS	clean session flag
MQTTSN_TIT_MASK	topic ID type mask
MQTTSN_TIT_SHORT	topic ID: short
MQTTSN_TIT_PREDEF	topic ID: pre-defined
MQTTSN_TIT_NORMAL	topic ID: normal

Definition at line 47 of file mqttsn.h.

anonymous enum

MQTT-SN message types.

Enumerator
MQTTSN_ADVERTISE	advertise message
MQTTSN_SEARCHGW	search gateway message
MQTTSN_GWINFO	gateway info message
MQTTSN_CONNECT	connect message
MQTTSN_CONNACK	connection acknowledgment message
MQTTSN_WILLTOPICREQ	will topic request
MQTTSN_WILLTOPIC	will topic
MQTTSN_WILLMSGREQ	will message request
MQTTSN_WILLMSG	will message
MQTTSN_REGISTER	topic registration request
MQTTSN_REGACK	topic registration acknowledgment
MQTTSN_PUBLISH	publish message
MQTTSN_PUBACK	publish acknowledgment
MQTTSN_PUBCOMP	publish received (QoS 2)
MQTTSN_PUBREC	publish complete (QoS 2)
MQTTSN_PUBREL	publish release (QoS 2)
MQTTSN_SUBSCRIBE	subscribe message
MQTTSN_SUBACK	subscription acknowledgment
MQTTSN_UNSUBSCRIBE	unsubscribe message
MQTTSN_UNSUBACK	unsubscription acknowledgment
MQTTSN_PINGREQ	ping request
MQTTSN_PINGRESP	ping response
MQTTSN_DISCONNECT	disconnect message
MQTTSN_WILLTOPICUPD	will topic update request
MQTTSN_WILLTOPICRESP	will topic update response
MQTTSN_WILLMSGUPD	will message update request
MQTTSN_WILLMSGRESP	will topic update response

Definition at line 66 of file mqttsn.h.

anonymous enum

MQTT-SN return codes.

Definition at line 101 of file mqttsn.h.