ili9341_params.h File Reference

Default configuration for ili9341. More...

Detailed Description

Default configuration for ili9341.

Author

Koen Zandberg koen@.nosp@m.berg.nosp@m.zand..nosp@m.net

Definition in file ili9341_params.h.

#include "board.h"
#include "lcd.h"

Include dependency graph for ili9341_params.h:

Go to the source code of this file.

Macros
#define	ILI9341_PARAM_SCREEN_IDS   0
	Default screen identifiers.
#define	ILI9341_NUMOF   ARRAY_SIZE(ili9341_params)
	Define the number of configured displays.
#define	ILI9341_SCREEN_NUMOF   ARRAY_SIZE(ili9341_screen_ids)
	Define the number screens this display driver is attached to.

Variables
static const lcd_params_t	ili9341_params []
	Configure ILI9341. More...
static const uint8_t	ili9341_screen_ids []
	Configure screen identifiers. More...

Set default configuration parameters for the ILI9341
#define	ILI9341_PARAM_SPI   SPI_DEV(0)
#define	ILI9341_PARAM_SPI_CLK   SPI_CLK_5MHZ
#define	ILI9341_PARAM_CS   GPIO_PIN(2, 2)
#define	ILI9341_PARAM_DCX   GPIO_PIN(3, 13)
#define	ILI9341_PARAM_RST   GPIO_UNDEF
#define	ILI9341_PARAM_SPI_MODE   SPI_MODE_0
#define	ILI9341_PARAM_RGB   0
#define	ILI9341_PARAM_INVERTED   0
#define	ILI9341_PARAM_NUM_LINES   320U
	Number of lines.
#define	ILI9341_PARAM_RGB_CHANNELS   240U
	Number of RGB channels (e.g. More...
#define	ILI9341_PARAM_ROTATION   ILI9341_ROTATION_HORZ_FLIP
#define	ILI9341_PARAM_OFFSET_X   0
	Horizontal offset.
#define	ILI9341_PARAM_OFFSET_Y   0
	Vertival offset.
#define	ILI9341_PARAM_IF_SPI
	Default interface params if SPI serial interface is enabled. More...
#define	ILI9341_PARAM_IF_PAR
	Default interface params if MCU 8080 8-bit parallel interface is enabled. More...
#define	ILI9341_PARAM_IF_PAR_16BIT
	Additional default interface params if MCU 8080 16-bit parallel interface is enabled. More...
#define	ILI9341_PARAM_IF_MODE   .mode = LCD_IF_PARALLEL_16BIT,
	Interface mode is MCU 8080 16-bit parallel.
#define	ILI9341_PARAMS
	Default params. More...

Macro Definition Documentation

ILI9341_PARAM_IF_PAR

#define ILI9341_PARAM_IF_PAR

Value:

                                    .d0_pin = ILI9341_PARAM_D0, \
                                    .d1_pin = ILI9341_PARAM_D1, \
                                    .d2_pin = ILI9341_PARAM_D2, \
                                    .d3_pin = ILI9341_PARAM_D3, \
                                    .d4_pin = ILI9341_PARAM_D4, \
                                    .d5_pin = ILI9341_PARAM_D5, \
                                    .d6_pin = ILI9341_PARAM_D6, \
                                    .d7_pin = ILI9341_PARAM_D7, \
                                    .wrx_pin = ILI9341_PARAM_WRX, \
                                    .rdx_pin = ILI9341_PARAM_RDX,

Default interface params if MCU 8080 8-bit parallel interface is enabled.

Definition at line 84 of file ili9341_params.h.

ILI9341_PARAM_IF_PAR_16BIT

#define ILI9341_PARAM_IF_PAR_16BIT

Value:

                                    .d8_pin = ILI9341_PARAM_D8, \
                                    .d9_pin = ILI9341_PARAM_D9, \
                                    .d10_pin = ILI9341_PARAM_D10, \
                                    .d11_pin = ILI9341_PARAM_D11, \
                                    .d12_pin = ILI9341_PARAM_D12, \
                                    .d13_pin = ILI9341_PARAM_D13, \
                                    .d14_pin = ILI9341_PARAM_D14, \
                                    .d15_pin = ILI9341_PARAM_D15,

Additional default interface params if MCU 8080 16-bit parallel interface is enabled.

Definition at line 100 of file ili9341_params.h.

ILI9341_PARAM_IF_SPI

#define ILI9341_PARAM_IF_SPI

Value:

                                    .spi = ILI9341_PARAM_SPI, \
                                    .spi_clk = ILI9341_PARAM_SPI_CLK, \
                                    .spi_mode = ILI9341_PARAM_SPI_MODE,

Default interface params if SPI serial interface is enabled.

Definition at line 75 of file ili9341_params.h.

ILI9341_PARAM_RGB_CHANNELS

#define ILI9341_PARAM_RGB_CHANNELS   240U

Number of RGB channels (e.g.

columns)

Definition at line 61 of file ili9341_params.h.

ILI9341_PARAMS

#define ILI9341_PARAMS

Value:

                                      { ILI9341_PARAM_IF_MODE \
                                      ILI9341_PARAM_IF_SPI \
                                      ILI9341_PARAM_IF_PAR \
                                      ILI9341_PARAM_IF_PAR_16BIT \
                                      .cs_pin = ILI9341_PARAM_CS, \
                                      .dcx_pin = ILI9341_PARAM_DCX, \
                                      .rst_pin = ILI9341_PARAM_RST, \
                                      .rgb = ILI9341_PARAM_RGB, \
                                      .inverted = ILI9341_PARAM_INVERTED, \
                                      .lines = ILI9341_PARAM_NUM_LINES, \
                                      .rgb_channels = ILI9341_PARAM_RGB_CHANNELS, \
                                      .rotation = ILI9341_PARAM_ROTATION, \
                                      .offset_x = ILI9341_PARAM_OFFSET_X, \
                                      .offset_y = ILI9341_PARAM_OFFSET_Y, \
}

Default params.

Note

The default parameter set defined here can only be used if a single ILI9341 display and only one interface mode is used. If multiple ILI9341 displays are used or if multiple interface modes are enabled by the modules lcd_spi, lcd_parallel and lcd_parallel_16bit, a user defined parameter set ILI9341_PARAMS has to be defined. In the latter case lcd_params_t::spi must then be set to SPI_UNDEF for displays with MCU 8080 8-/16-bit parallel interfaces.

Definition at line 135 of file ili9341_params.h.

Variable Documentation

ili9341_params

const lcd_params_t ili9341_params[]

static

Initial value:

=
{
    ILI9341_PARAMS,
}

Configure ILI9341.

Definition at line 156 of file ili9341_params.h.

ili9341_screen_ids

const uint8_t ili9341_screen_ids[]

static

Initial value:

=
{
    ILI9341_PARAM_SCREEN_IDS,
}

Configure screen identifiers.

Definition at line 171 of file ili9341_params.h.