Board configuration for the nrf9160dk board. More...
Detailed Description
Board configuration for the nrf9160dk board.
Definition in file board.h.
#include "cpu.h"
Include dependency graph for board.h: This graph shows which files directly or indirectly include this file:Go to the source code of this file.
Clock configuration | |
| |
| #define | CLOCK_HFCLK (32U) |
| set to 0: internal RC oscillator 32: 32MHz crystal | |
| #define | CLOCK_LFCLK (CLOCK_LFCLKSRC_SRC_LFXO) |
| LFCLK Source. | |
LED pin configuration | |
| #define | LED0_PIN GPIO_PIN(0, 2) |
| LED0 pin definition. | |
| #define | LED1_PIN GPIO_PIN(0, 3) |
| LED1 pin definition. | |
| #define | LED2_PIN GPIO_PIN(0, 4) |
| LED2 pin definition. | |
| #define | LED3_PIN GPIO_PIN(0, 5) |
| LED3 pin definition. | |
| #define | LED0_MASK (1 << 2) |
| LED0 PORT bitmask. | |
| #define | LED1_MASK (1 << 3) |
| LED1 PORT bitmask. | |
| #define | LED2_MASK (1 << 4) |
| LED2 PORT bitmask. | |
| #define | LED3_MASK (1 << 5) |
| LED3 PORT bitmask. | |
| #define | LED_PORT (NRF_P0_S) |
| Default LED PORT. | |
| #define | LED0_ON (LED_PORT->OUTSET = LED0_MASK) |
| LED0 ON macro. | |
| #define | LED0_OFF (LED_PORT->OUTCLR = LED0_MASK) |
| LED0 OFF macro. | |
| #define | LED0_TOGGLE (LED_PORT->OUT ^= LED0_MASK) |
| LED0 toggle macro. | |
| #define | LED1_ON (LED_PORT->OUTSET = LED1_MASK) |
| LED1 ON macro. | |
| #define | LED1_OFF (LED_PORT->OUTCLR = LED1_MASK) |
| LED1 OFF macro. | |
| #define | LED1_TOGGLE (LED_PORT->OUT ^= LED1_MASK) |
| LED1 toggle macro. | |
| #define | LED2_ON (LED_PORT->OUTSET = LED2_MASK) |
| LED2 ON macro. | |
| #define | LED2_OFF (LED_PORT->OUTCLR = LED2_MASK) |
| LED2 OFF macro. | |
| #define | LED2_TOGGLE (LED_PORT->OUT ^= LED2_MASK) |
| LED2 toggle macro. | |
| #define | LED3_ON (LED_PORT->OUTSET = LED3_MASK) |
| LED3 ON macro. | |
| #define | LED3_OFF (LED_PORT->OUTCLR = LED3_MASK) |
| LED3 OFF macro. | |
| #define | LED3_TOGGLE (LED_PORT->OUT ^= LED3_MASK) |
| LED3 toggle macro. | |
Button pin configuration | |
| #define | BTN0_PIN GPIO_PIN(0, 6) |
| BTN0 pin definition. | |
| #define | BTN0_MODE GPIO_IN_PU |
| BTN0 default mode. | |
| #define | BTN1_PIN GPIO_PIN(0, 7) |
| BTN1 pin definition. | |
| #define | BTN1_MODE GPIO_IN_PU |
| BTN1 default mode. | |
| #define | BTN2_PIN GPIO_PIN(0, 8) |
| BTN2 pin definition. | |
| #define | BTN2_MODE GPIO_IN_PU |
| BTN2 default mode. | |
| #define | BTN3_PIN GPIO_PIN(0, 9) |
| BTN3 pin definition. | |
| #define | BTN3_MODE GPIO_IN_PU |
| BTN3 default mode. | |
WS281x RGB LED configuration | |
| #define | WS281X_TIMER_DEV TIMER_DEV(1) |
| Timer device. | |
| #define | WS281X_TIMER_MAX_VALUE TIMER_1_MAX_VALUE |
| Timer max value. | |
