35 #define PCA9633_BLINKING_PERIOD_MAX_MS  (10625) 
   42 #define PCA9633_BLINKING_RATIO_BALANCED 128 
  253                           uint8_t on_off_ratio);
 
void pca9633_set_ldr_state_all(pca9633_t *dev, pca9633_ldr_state_t state)
Set the LED driver output state for all channels.
 
void pca9633_turn_off(pca9633_t *dev)
Turn off all LEDs.
 
void pca9633_set_auto_increment(pca9633_t *dev, pca9633_auto_inc_option_t option)
Set an option for auto increment.
 
void pca9633_sleep(pca9633_t *dev)
Switch to low power mode.
 
pca9633_ldr_state_t
LED driver output state, LEDOUT (page 14, below table 13)
 
void pca9633_set_pwm(pca9633_t *dev, pca9633_pwm_channel_t pwm_channel, uint8_t pwm)
Set individual PWM signal for a given channel.
 
void pca9633_set_blinking(pca9633_t *dev, uint16_t blink_period_ms, uint8_t on_off_ratio)
Set up values for blinking mode.
 
void pca9633_set_group_control_mode(pca9633_t *dev, pca9633_group_control_mode_t mode)
Set the group control mode.
 
void pca9633_set_grp_pwm(pca9633_t *dev, uint8_t pwm)
Set global PWM signal.
 
void pca9633_set_rgba(pca9633_t *dev, uint8_t r, uint8_t g, uint8_t b, uint8_t w)
Set PWM values for RGBA.
 
pca9633_auto_inc_option_t
Auto-Increment options (page 10, table 6)
 
void pca9633_set_ldr_state(pca9633_t *dev, pca9633_ldr_state_t state, pca9633_pwm_channel_t pwm_channel)
Set the LED driver output state for a given channel.
 
pca9633_pwm_channel_t
PCA9633 PWM channel definitions.
 
void pca9633_set_rgb(pca9633_t *dev, uint8_t r, uint8_t g, uint8_t b)
Set PWM values for RGB.
 
pca9633_group_control_mode_t
PCA9633 group control modes.
 
int pca9633_init(pca9633_t *dev, const pca9633_params_t *params)
Initialization.
 
void pca9633_wakeup(pca9633_t *dev)
Switch to normal mode.
 
void pca9633_turn_on(pca9633_t *dev)
Turn on all LEDs.
 
@ PCA9633_ERROR_I2C
I2C communication error.
 
@ PCA9633_LDR_STATE_IND_GRP
LED driver x individual brightness and group dimming/ blinking can be controlled through its PWMx reg...
 
@ PCA9633_LDR_STATE_ON
LED driver x is fully on (individual brightness and group dimming/ blinking not controlled)
 
@ PCA9633_LDR_STATE_IND
LED driver x individual brightness can be controlled through its PWMx register.
 
@ PCA9633_LDR_STATE_OFF
LED driver x is off.
 
@ PCA9633_AI_IND
Auto-Increment for individual brightness registers only.
 
@ PCA9633_AI_ALL
Auto-Increment for all registers.
 
@ PCA9633_AI_GBL
Auto-Increment for global control registers only.
 
@ PCA9633_AI_DISABLED
No Auto-Increment.
 
@ PCA9633_AI_IND_GBL
Auto-Increment for individual and global control registers only.
 
@ PCA9633_PWM_CHANNEL_1
PWM channel 1.
 
@ PCA9633_PWM_CHANNEL_3
PWM channel 3.
 
@ PCA9633_PWM_CHANNEL_2
PWM channel 2.
 
@ PCA9633_PWM_CHANNEL_0
PWM channel 0.
 
@ PCA9633_GROUP_CONTROL_MODE_DIMMING
Control mode for dimming.
 
@ PCA9633_GROUP_CONTROL_MODE_BLINKING
Control mode for blinking.
 
uint_fast8_t i2c_t
Default i2c_t type definition.
 
Low-level I2C peripheral driver interface definition.
 
Register definitions for the PCA9633 I2C PWM controller.
 
#define PCA9633_REG_PWM0
Brightness control LED0.
 
#define PCA9633_REG_PWM2
Brightness control LED2.
 
#define PCA9633_REG_PWM1
Brightness control LED1.
 
#define PCA9633_REG_PWM3
Brightness control LED3.
 
PCA9633 device initialization parameters.
 
uint8_t reg_pwm_blue
Register for blue color.
 
uint8_t reg_pwm_green
Register for green color.
 
uint8_t reg_pwm_amber
Register for amber color.
 
uint8_t reg_pwm_red
Register for red color.
 
uint16_t i2c_addr
I2C address of device.
 
bool has_amber_channel
Whether PCA9633 has fourth channel.
 
PCA9633 PWM device data structure type.
 
uint8_t stored_reg_ledout
Stored register content of LEDOUT.
 
pca9633_params_t params
Device initialization parameters.