sx1280_params.h File Reference

Default configuration. More...

Detailed Description

Default configuration.

Author

Francisco Molina franc.nosp@m.ois-.nosp@m.xavie.nosp@m.r.mo.nosp@m.lina@.nosp@m.inri.nosp@m.a.fr

Aymeric Brochier aymer.nosp@m.ic.b.nosp@m.rochi.nosp@m.er@u.nosp@m.niv-g.nosp@m.reno.nosp@m.ble-a.nosp@m.lpes.nosp@m..fr

Definition in file sx1280_params.h.

#include "board.h"
#include "sx1280.h"
#include "sx1280_constants.h"

Include dependency graph for sx1280_params.h:

Go to the source code of this file.

Variables
static const sx1280_params_t	sx1280_params []
	Configuration struct. More...

Set default configuration parameters
Default values are adapted for mbed shield used with to nucleo64 boards See also https://github.com/donsez/RIOT/blob/pr/sx1280/drivers/sx1280/include/sx1280_hal.h 'board/common/nucleo64/include/arduino_pinmap.h' ARDUINO_PIN_10 -> GPIO_PIN(PORT_B, 6) -> GPIO_PIN(1, 6) ARDUINO_PIN_7 -> GPIO_PIN(PORT_A, 8) -> GPIO_PIN(0, 8) ARDUINO_PIN_6 -> GPIO_PIN(PORT_B, 10) -> GPIO_PIN(1, 10) ARDUINO_PIN_9 -> GPIO_PIN(PORT_C, 7) -> GPIO_PIN(2, 7)
#define	USE_RX_CONTINUOUS_MODE
	default RX MODE
#define	SX1280_RX_MODE   SX1280_RX_CONTINUOUS_MODE
	continuous RX MODE
#define	SX1280_PARAM_SPI   SPI_DEV(0)
	default SPI device
#define	SX1280_PARAM_SPI_CLK   SPI_CLK_5MHZ
	default SPI speed
#define	SX1280_PARAM_SPI_MODE   SPI_MODE_0
	default SPI mode for sx1280
#define	SX1280_PARAM_SPI_NSS   GPIO_PIN(1, 6)
	SPI NSS pin.
#define	SX1280_PARAM_RESET   GPIO_PIN(0, 8)
	Reset pin.
#define	SX1280_PARAM_DIO0   GPIO_PIN(1, 10)
	DIO0.
#define	SX1280_PARAM_DIO1   GPIO_PIN(2, 7)
	DIO1.
#define	SX1280_PARAMS
	Default sx1280 parameters. More...

Macro Definition Documentation

SX1280_PARAMS

#define SX1280_PARAMS

Value:

                                    { .spi = SX1280_PARAM_SPI,            \
                                    .spi_mode = SX1280_PARAM_SPI_MODE,  \
                                    .spi_clk = SX1280_PARAM_SPI_CLK,    \
                                    .nss_pin = SX1280_PARAM_SPI_NSS,    \
                                    .reset_pin = SX1280_PARAM_RESET,    \
                                    .dio0_pin = SX1280_PARAM_DIO0,      \
                                    .dio1_pin = SX1280_PARAM_DIO1,      \
}

Default sx1280 parameters.

Definition at line 87 of file sx1280_params.h.

Variable Documentation

sx1280_params

const sx1280_params_t sx1280_params[]

static

Initial value:

=
{
    SX1280_PARAMS
}

Configuration struct.

Definition at line 101 of file sx1280_params.h.