periph_conf.h File Reference
Boards » Lobaro Lorabox

Support for the Lobaro lorabox with stm32l151cb. More...

Detailed Description

Support for the Lobaro lorabox with stm32l151cb.

Peripheral MCU configuration for the Lobaro lorabox board

Author
Thomas Eichinger thoma.nosp@m.s.ei.nosp@m.ching.nosp@m.er@f.nosp@m.u-ber.nosp@m.lin..nosp@m.de
Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de
Kevin Weiss kevin.nosp@m..wei.nosp@m.ss@ha.nosp@m.w-ha.nosp@m.mburg.nosp@m..de
Leandro Lanzieri leand.nosp@m.ro.l.nosp@m.anzie.nosp@m.ri@h.nosp@m.aw-ha.nosp@m.mbur.nosp@m.g.de

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "clk_conf.h"
#include "cfg_timer_tim2.h"
+ Include dependency graph for periph_conf.h:

Go to the source code of this file.

#define CONFIG_BOARD_HAS_LSE   1
 

UART configuration

#define UART_0_ISR   (isr_usart1)
 
#define UART_1_ISR   (isr_usart2)
 
#define UART_NUMOF   ARRAY_SIZE(uart_config)
 
static const uart_conf_t uart_config []
 

PWM configuration

#define PWM_NUMOF   0
 

SPI configuration

#define SPI_NUMOF   ARRAY_SIZE(spi_config)
 
static const spi_conf_t spi_config []
 

I2C configuration

#define I2C_0_ISR   isr_i2c1_ev
 
#define I2C_NUMOF   ARRAY_SIZE(i2c_config)
 
static const i2c_conf_t i2c_config []
 

Variable Documentation

◆ i2c_config

const i2c_conf_t i2c_config[]
static
Initial value:
= {
{
.dev = I2C1,
.speed = I2C_SPEED_NORMAL,
.scl_pin = GPIO_PIN(PORT_B, 8),
.sda_pin = GPIO_PIN(PORT_B, 9),
.scl_af = GPIO_AF4,
.sda_af = GPIO_AF4,
.bus = APB1,
.rcc_mask = RCC_APB1ENR_I2C1EN,
.clk = CLOCK_APB1,
.irqn = I2C1_EV_IRQn
}
}
PORT_B
@ PORT_B
port B
Definition: periph_cpu.h:48
GPIO_PIN
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:46
GPIO_AF4
@ GPIO_AF4
use alternate function 4
Definition: cpu_gpio.h:106
APB1
@ APB1
Advanced Peripheral Bus 1
Definition: periph_cpu.h:79
I2C_SPEED_NORMAL
@ I2C_SPEED_NORMAL
normal mode: ~100 kbit/s
Definition: periph_cpu.h:278
CLOCK_APB1
#define CLOCK_APB1
Half AHB clock.
Definition: periph_common_conf.h:41

Definition at line 122 of file periph_conf.h.

◆ spi_config

const spi_conf_t spi_config[]
static
Initial value:
= {
{
.dev = SPI1,
.mosi_pin = GPIO_PIN(PORT_A, 7),
.miso_pin = GPIO_PIN(PORT_A, 6),
.sclk_pin = GPIO_PIN(PORT_A, 5),
.cs_pin = GPIO_PIN(PORT_B, 0),
.mosi_af = GPIO_AF5,
.miso_af = GPIO_AF5,
.sclk_af = GPIO_AF5,
.cs_af = GPIO_AF5,
.rccmask = RCC_APB2ENR_SPI1EN,
.apbbus = APB2
},
{
.dev = SPI2,
.mosi_pin = GPIO_PIN(PORT_B, 14),
.miso_pin = GPIO_PIN(PORT_B, 15),
.sclk_pin = GPIO_PIN(PORT_B, 13),
.cs_pin = GPIO_PIN(PORT_B, 12),
.mosi_af = GPIO_AF5,
.miso_af = GPIO_AF5,
.sclk_af = GPIO_AF5,
.cs_af = GPIO_AF5,
.rccmask = RCC_APB1ENR_SPI2EN,
.apbbus = APB1
}
}
PORT_A
@ PORT_A
port A
Definition: periph_cpu.h:47
GPIO_AF5
@ GPIO_AF5
use alternate function 5
Definition: cpu_gpio.h:107
APB2
@ APB2
Advanced Peripheral Bus 2
Definition: periph_cpu.h:80

Definition at line 86 of file periph_conf.h.

◆ uart_config

const uart_conf_t uart_config[]
static
Initial value:
= {
{
.dev = USART1,
.rcc_mask = RCC_APB2ENR_USART1EN,
.rx_pin = GPIO_PIN(PORT_A, 10),
.tx_pin = GPIO_PIN(PORT_A, 9),
.rx_af = GPIO_AF7,
.tx_af = GPIO_AF7,
.bus = APB2,
.irqn = USART1_IRQn
},
{
.dev = USART2,
.rcc_mask = RCC_APB1ENR_USART2EN,
.rx_pin = GPIO_PIN(PORT_A, 3),
.tx_pin = GPIO_PIN(PORT_A, 2),
.rx_af = GPIO_AF7,
.tx_af = GPIO_AF7,
.bus = APB1,
.irqn = USART2_IRQn
}
}
GPIO_AF7
@ GPIO_AF7
use alternate function 7
Definition: cpu_gpio.h:109

Definition at line 46 of file periph_conf.h.