periph_conf.h File Reference

MCB2388 peripheral configuration. More...

Detailed Description

MCB2388 peripheral configuration.

Author

Benjamin Valentin benpi.nosp@m.cco@.nosp@m.beuth.nosp@m.-hoc.nosp@m.hschu.nosp@m.le.d.nosp@m.e

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "kernel_defines.h"

Include dependency graph for periph_conf.h:

Go to the source code of this file.

Clock configuration
#define	XTAL_HZ   (12000000U) /* the board provides a 12 MHz XTAL */
#define	CLOCK_CORECLOCK   (72000000U) /* the lpc2388 runs with 72MHz */
#define	CLOCK_PCLK   (CLOCK_CORECLOCK)

Timer configuration, select a number from 1 to 4
#define	TIMER_NUMOF   (4U)

UART configuration
#define	UART_NUMOF   (2)
static const uart_conf_t	uart_config []

SPI configuration
#define	SPI_NUMOF   ARRAY_SIZE(spi_config)
static const spi_conf_t	spi_config []

ADC configuration
#define	ADC_NUMOF   (1)
static const adc_conf_t	adc_config []

I2C configuration
#define	I2C_NUMOF   (2)
static const i2c_conf_t	i2c_config []

Variable Documentation

adc_config

const adc_conf_t adc_config[]

static

Initial value:

= {
    {
        .chan       = 0,
        .pinsel     = 1,
        .pinsel_msk = BIT14,
    },
}

Definition at line 105 of file periph_conf.h.

i2c_config

const i2c_conf_t i2c_config[]

static

Initial value:

= {
    {
        .dev        = I2C0,
        .speed      = I2C_SPEED_NORMAL,
        .irq_prio   = 5,
        .pinsel_sda = 1,
        .pinsel_scl = 1,
        .pinsel_msk_sda = BIT22,        
        .pinsel_msk_scl = BIT24,        
    },
    {
        .dev        = I2C1,
        .speed      = I2C_SPEED_NORMAL,
        .irq_prio   = 5,
        .pinsel_sda = 1,
        .pinsel_scl = 1,
        .pinsel_msk_sda = BIT6 | BIT7,  
        .pinsel_msk_scl = BIT8 | BIT9,  
    },
}

Definition at line 120 of file periph_conf.h.

spi_config

const spi_conf_t spi_config[]

static

Initial value:

= {
    {
        .dev = SPI0,
        .pinsel_mosi = 3,
        .pinsel_miso = 3,
        .pinsel_clk  = 3,
        .pinsel_msk_mosi = (BIT16 | BIT17), 
        .pinsel_msk_miso = (BIT14 | BIT15), 
        .pinsel_msk_clk  = (BIT8  | BIT9),  
    },
    {
        .dev = SPI1,
        .pinsel_mosi = 0,
        .pinsel_miso = 0,
        .pinsel_clk  = 0,
        .pinsel_msk_mosi = (BIT19), 
        .pinsel_msk_miso = (BIT17), 
        .pinsel_msk_clk  = (BIT15), 
    },
}

Definition at line 77 of file periph_conf.h.

uart_config

const uart_conf_t uart_config[]

static

Initial value:

= {
    {
        .dev = UART0,
        .irq_prio_rx = 6,
        .pinsel_rx   = 0,
        .pinsel_tx   = 0,
        .pinsel_msk_rx = BIT4,
        .pinsel_msk_tx = BIT6,
    },
    {
        .dev = UART1,
        .irq_prio_rx = 6,
        .pinsel_rx   = 1,
        .pinsel_tx   = 0,
        .pinsel_msk_rx = BIT0,
        .pinsel_msk_tx = BIT30,
    }
}

Definition at line 51 of file periph_conf.h.