cc2538_rf.h
Go to the documentation of this file.
1 /*
2  * Copyright (C) 2016 MUTEX NZ Ltd.
3  * Copyright (C) 2015 Loci Controls Inc.
4  *
5  * This file is subject to the terms and conditions of the GNU Lesser
6  * General Public License v2.1. See the file LICENSE in the top level
7  * directory for more details.
8  *
9  */
10 
22 #ifndef CC2538_RF_H
23 #define CC2538_RF_H
24 
25 #include <stdbool.h>
26 
27 #include "board.h"
28 #include "cc2538_rfcore.h"
29 
30 #include "net/ieee802154.h"
31 #include "kernel_defines.h"
32 
33 #include "net/ieee802154/radio.h"
34 
35 #include "net/netopt.h"
36 
37 #ifdef __cplusplus
38 extern "C" {
39 #endif
40 
41 #define CC2538_AUTOCRC_LEN (2)
42 #define CC2538_RF_FIFO_SIZE (128)
43 #define CC2538_PACKET_LENGTH_SIZE (1)
44 #define CC2538_LENGTH_BYTE_MASK (0x7F)
46 #define CC2538_RF_MAX_DATA_LEN (CC2538_RF_FIFO_SIZE - CC2538_PACKET_LENGTH_SIZE)
47 
48 /* TODO: Move these to sys/include/net/ieee802154.h somehow */
49 /* IEEE 802.15.4 defined constants (2.4 GHz logical channels) */
50 #define IEEE802154_MIN_FREQ (2405)
51 #define IEEE802154_MAX_FREQ (2480)
53 #define IEEE802154_CHANNEL_SPACING (5)
55 #define IEEE802154_CHAN2FREQ(chan) ( IEEE802154_MIN_FREQ + ((chan) - IEEE802154_CHANNEL_MIN) * IEEE802154_CHANNEL_SPACING )
56 #define IEEE802154_FREQ2CHAN(freq) ( IEEE802154_CHANNEL_MIN + ((freq) - IEEE802154_MIN_FREQ) / IEEE802154_CHANNEL_SPACING )
57 /* /TODO */
58 
59 #define CC2538_MIN_FREQ (2394)
60 #define CC2538_MAX_FREQ (2507)
61 
62 #define CC2538_RF_POWER_DEFAULT (CONFIG_IEEE802154_DEFAULT_TXPOWER)
63 #define CC2538_RF_CHANNEL_DEFAULT (CONFIG_IEEE802154_DEFAULT_CHANNEL)
64 
65 #define OUTPUT_POWER_MIN (-24)
66 #define OUTPUT_POWER_MAX (7)
67 #define NUM_POWER_LEVELS ( OUTPUT_POWER_MAX - OUTPUT_POWER_MIN + 1 )
68 
69 #define CC2538_CORR_VAL_MIN (50U)
70 #define CC2538_CORR_VAL_MAX (110U)
71 #define CC2538_CORR_VAL_MASK (0x7F)
72 
73 #define CC2538_CRC_BIT_MASK (0x80)
74 
75 #define CC2538_CCA_THR_MASK (0x000000FF)
77 #define CC2538_CCA_MODE_MASK (0x18)
78 #define CC2538_CCA_MODE_POS (3U)
80 #define CC2538_CSP_SKIP_INST_MASK (0x70)
81 #define CC2538_CSP_SKIP_INST_POS (4U)
83 #define CC2538_CSP_SKIP_N_MASK (0x08)
85 #define CC2538_CSP_SKIP_COND_CCA (0x00)
86 #define CC2538_CSP_SKIP_COND_CSPZ (0x06)
87 #define CC2538_CSP_SKIP_COND_RSSI (0x07)
89 #define CC2538_SFR_MTMSEL_MASK (0x7)
90 #define CC2538_SFR_MTMSEL_TIMER_P (0x2)
91 #define CC2538_MCTRL_SYNC_MASK (0x2)
92 #define CC2538_MCTRL_RUN_MASK (0x1)
94 #define CC2538_CSP_MCU_CTRL_MASK (0x1)
96 #define CC2538_CSP_INCMAXY_MAX_MASK (0x7)
99 #define CC2538_RXENABLE_RXON_MASK (0x80)
101 #define CC2538_RSSI_OFFSET (-73)
102 #define CC2538_RF_SENSITIVITY (-97)
104 #define CC2538_ACCEPT_FT_0_BEACON (1 << 3)
105 #define CC2538_ACCEPT_FT_1_DATA (1 << 4)
106 #define CC2538_ACCEPT_FT_2_ACK (1 << 5)
107 #define CC2538_ACCEPT_FT_3_CMD (1 << 6)
108 #define CC2538_STATE_SFD_WAIT_RANGE_MIN (0x03U)
109 #define CC2538_STATE_SFD_WAIT_RANGE_MAX (0x06U)
110 #define CC2538_FRMCTRL1_PENDING_OR_MASK (0x04)
112 #define CC2538_FRMCTRL0_RX_MODE_DIS (0xC)
115 #define RFCORE_ASSERT(expr) (void)( (expr) || RFCORE_ASSERT_failure(#expr, __FUNCTION__, __LINE__) )
116 
117 #if DEVELHELP
118 #define RFCORE_WAIT_UNTIL(expr) while (!(expr)) { \
119  DEBUG("RFCORE_WAIT_UNTIL(%s) at line %u in %s()\n", #expr, __LINE__, __FUNCTION__); \
120  thread_yield(); \
121 }
122 #else
123 #define RFCORE_WAIT_UNTIL(expr) while (!(expr)) thread_yield()
124 #endif
125 
126 #define RFCORE_FLUSH_RECEIVE_FIFO() rfcore_strobe(ISFLUSHRX)
127 
128 #define ABS_DIFF(x, y) ( ((x) < (y))? ((y) - (x)) : ((x) - (y)) )
129 #define BOOLEAN(x) ( (x) != 0 )
130 #define NOT(x) ( (x) == 0 )
131 #define GET_BYTE(buffer, index) ( (unsigned char*)(buffer) )[index]
132 
133 #define BIT(n) ( 1 << (n) )
134 
135 enum {
136  FSM_STATE_IDLE = 0,
137  FSM_STATE_RX_CALIBRATION = 2,
138  FSM_STATE_TX_CALIBRATION = 32,
139 };
140 
144 enum {
145  STROBE_ERR = BIT(6),
146  TXUNDERF = BIT(5),
147  TXOVERF = BIT(4),
148  RXUNDERF = BIT(3),
149  RXOVERF = BIT(2),
150  RXABO = BIT(1),
151  NLOCK = BIT(0),
152 };
153 
157 enum {
158  SET_RXENMASK_ON_TX = BIT(0),
159  IGNORE_TX_UNDERF = BIT(1),
160  PENDING_OR = BIT(2),
161 };
162 
166 enum {
167  ENERGY_SCAN = BIT(4),
168  AUTOACK = BIT(5),
169  AUTOCRC = BIT(6),
170  APPEND_DATA_MODE = BIT(7),
171 };
172 
176 enum {
177  ACT_UNUSED = BIT(0),
178  SFD = BIT(1),
179  FIFOP = BIT(2),
180  SRC_MATCH_DONE = BIT(3),
181  SRC_MATCH_FOUND = BIT(4),
182  FRAME_ACCEPTED = BIT(5),
183  RXPKTDONE = BIT(6),
184  RXMASKZERO = BIT(7),
185 };
186 
190 enum {
191  TXACKDONE = BIT(0),
192  TXDONE = BIT(1),
193  RF_IDLE = BIT(2),
194  CSP_MANINT = BIT(3),
195  CSP_STOP = BIT(4),
196  CSP_WAIT = BIT(5),
197 };
198 
202 enum {
203  rfc_obs_sig0 = 0,
204  rfc_obs_sig1 = 1,
205  rfc_obs_sig2 = 2,
206 };
207 
211 enum {
214  rfc_sniff_data = 0x08,
216  rfc_sniff_clk = 0x09,
217  rssi_valid = 0x0c,
220  demod_cca = 0x0d,
223  sampled_cca = 0x0e,
226  sfd_sync = 0x0f,
230  tx_active = 0x10,
232  rx_active = 0x11,
234  ffctrl_fifo = 0x12,
236  ffctrl_fifop = 0x13,
242  packet_done = 0x14,
245  rfc_xor_rand_i_q = 0x16,
247  rfc_rand_q = 0x17,
249  rfc_rand_i = 0x18,
251  lock_status = 0x19,
252  pa_pd = 0x20,
253  lna_pd = 0x2a,
254  disabled = 0xff,
255 };
256 
260 #ifndef CONFIG_CC2538_RF_OBS_0
261 #define CONFIG_CC2538_RF_OBS_0 tx_active
262 #endif
263 #ifndef CONFIG_CC2538_RF_OBS_1
264 #define CONFIG_CC2538_RF_OBS_1 rx_active
265 #endif
266 #ifndef CONFIG_CC2538_RF_OBS_2
267 #define CONFIG_CC2538_RF_OBS_2 rssi_valid
268 #endif
269 
270 /* Default configuration for cc2538dk or similar */
271 #ifndef CONFIG_CC2538_RF_OBS_SIG_0_PCX
272 #define CONFIG_CC2538_RF_OBS_SIG_0_PCX 0 /* PC0 = LED_1 (red) */
273 #endif
274 #ifndef CONFIG_CC2538_RF_OBS_SIG_1_PCX
275 #define CONFIG_CC2538_RF_OBS_SIG_1_PCX 1 /* PC0 = LED_2 (red) */
276 #endif
277 #ifndef CONFIG_CC2538_RF_OBS_SIG_2_PCX
278 #define CONFIG_CC2538_RF_OBS_SIG_2_PCX 2 /* PC0 = LED_3 (red) */
279 #endif
280 #if ((CONFIG_CC2538_RF_OBS_SIG_2_PCX > 7) || \
281  (CONFIG_CC2538_RF_OBS_SIG_1_PCX > 7) || \
282  (CONFIG_CC2538_RF_OBS_SIG_0_PCX > 7))
283 #error "CONFIG_CC2538_RF_OBS_SIG_X_PCX must be between 0-7 (PC0-PC7)"
284 #endif
285 
289 typedef struct {
290  uint8_t state;
291 } cc2538_rf_t;
292 
301 
305 static inline void cc2538_rf_enable_irq(void)
306 {
307  RFCORE_XREG_RFIRQM1 = TXDONE | CSP_STOP | TXACKDONE;
309 }
310 
314 static inline void cc2538_rf_disable_irq(void)
315 {
318 }
319 
325 
333 
339 void cc2538_get_addr_long(uint8_t *addr);
340 
346 void cc2538_get_addr_short(uint8_t *addr);
347 
353 unsigned int cc2538_get_chan(void);
354 
362 
368 uint16_t cc2538_get_pan(void);
369 
376 
381 void cc2538_init(void);
382 
389 bool cc2538_is_on(void);
390 
395 void cc2538_off(void);
396 
401 bool cc2538_on(void);
402 
409 
415 void cc2538_set_addr_short(const uint8_t *addr);
416 
422 void cc2538_set_addr_long(const uint8_t *addr);
423 
429 void cc2538_set_chan(unsigned int chan);
430 
436 void cc2538_set_freq(unsigned int MHz);
437 
443 void cc2538_set_monitor(bool mode);
444 
450 void cc2538_set_pan(uint16_t pan);
451 
459 
465 void cc2538_set_tx_power(int dBm);
466 
467 #ifdef __cplusplus
468 }
469 #endif
470 
471 #endif /* CC2538_RF_H */
#define RFCORE_XREG_RFIRQM0
RF interrupt masks.
Definition: cc2538.h:384
#define RFCORE_XREG_RFIRQM1
RF interrupt masks.
Definition: cc2538.h:385
void cc2538_set_pan(uint16_t pan)
Set the PAN ID of the device.
void cc2538_set_addr_long(const uint8_t *addr)
Set the long address of the device.
unsigned int cc2538_get_chan(void)
Get the configured channel number of the device.
void cc2538_off(void)
Deactivate the CC2538 radio device.
bool cc2538_on(void)
Activate the CC2538 radio device.
void cc2538_rf_hal_setup(ieee802154_dev_t *hal)
Setup CC2538 in order to be used with the IEEE 802.15.4 Radio HAL.
void cc2538_irq_handler(void)
IRQ handler for RF events.
bool cc2538_channel_clear(void)
Trigger a clear channel assessment.
void cc2538_set_addr_short(const uint8_t *addr)
Set the short address of the device.
void cc2538_set_chan(unsigned int chan)
Set the channel number of the device.
static void cc2538_rf_enable_irq(void)
Enable CC2538 RF IRQs.
Definition: cc2538_rf.h:305
void cc2538_init(void)
Initialise the CC2538 radio hardware.
uint16_t cc2538_get_pan(void)
Get the configured PAN ID of the device.
void cc2538_set_tx_power(int dBm)
Set the transmission power for the device.
void cc2538_set_monitor(bool mode)
Enable/disable monitor (promiscuous) mode for the device.
@ RXPKTDONE
End of frame event.
Definition: cc2538_rf.h:183
@ SFD
Start of frame event.
Definition: cc2538_rf.h:178
void cc2538_get_addr_short(uint8_t *addr)
Get the configured short address of the device.
static void cc2538_rf_disable_irq(void)
Disable CC2538 RF IRQs.
Definition: cc2538_rf.h:314
bool cc2538_is_on(void)
Check if device is active.
bool cc2538_get_monitor(void)
Check if device is in monitor (promiscuous) mode.
void cc2538_set_state(cc2538_rf_t *dev, netopt_state_t state)
Set the state of the device.
@ rfc_rand_i
Random data output from the I channel of the receiver.
Definition: cc2538_rf.h:249
@ lna_pd
LNA power-down signal.
Definition: cc2538_rf.h:253
@ rssi_valid
Pin is high when the RSSI value has been updated at least once since RX was started.
Definition: cc2538_rf.h:217
@ packet_done
A complete frame has been received.
Definition: cc2538_rf.h:242
@ rx_active
Indicates that FFCTRL is in one of the RX states.
Definition: cc2538_rf.h:232
@ disabled
disabled
Definition: cc2538_rf.h:254
@ constant_value_0
Constant value 0.
Definition: cc2538_rf.h:212
@ sampled_cca
A sampled version of the CCA bit from demodulator.
Definition: cc2538_rf.h:223
@ rfc_xor_rand_i_q
XOR between I and Q random outputs.
Definition: cc2538_rf.h:245
@ rfc_sniff_data
Data from packet sniffer.
Definition: cc2538_rf.h:214
@ ffctrl_fifop
Pin is high when the number of bytes in the RXFIFO exceeds the programmable threshold or at least one...
Definition: cc2538_rf.h:236
@ pa_pd
Power amplifier power-down signal.
Definition: cc2538_rf.h:252
@ sfd_sync
Pin is high when a SFD has been received or transmitted.
Definition: cc2538_rf.h:226
@ demod_cca
Clear channel assessment.
Definition: cc2538_rf.h:220
@ constant_value_1
Constant value 1.
Definition: cc2538_rf.h:213
@ tx_active
Indicates that FFCTRL is in one of the TX states.
Definition: cc2538_rf.h:230
@ ffctrl_fifo
Pin is high when one or more bytes are in the RXFIFO.
Definition: cc2538_rf.h:234
@ rfc_rand_q
Random data output from the Q channel of the receiver.
Definition: cc2538_rf.h:247
@ rfc_sniff_clk
250kHz clock for packet sniffer data.
Definition: cc2538_rf.h:216
@ lock_status
1 when PLL is in lock, otherwise 0
Definition: cc2538_rf.h:251
void cc2538_set_freq(unsigned int MHz)
Set the frequency of the device.
void cc2538_get_addr_long(uint8_t *addr)
Get the configured long address of the device.
int cc2538_get_tx_power(void)
Get the configured transmission power of the device.
void cc2538_setup(cc2538_rf_t *dev)
Setup a CC2538 radio device.
CC2538 RF core interface.
netopt_state_t
Option parameter to be used with NETOPT_STATE to set or get the state of a network device or protocol...
Definition: netopt.h:894
Common macros and compiler attributes/pragmas configuration.
Definition of global configuration options.
Device descriptor for CC2538 transceiver.
Definition: cc2538_rf.h:289
uint8_t state
current state of the radio
Definition: cc2538_rf.h:290
the IEEE802.15.4 device descriptor
Definition: radio.h:415
IEEE 802.15.4 header definitions.