cc26x2_cc13x2_setup.h

Go to the documentation of this file.

/*
 * Copyright (C) 2020 Locha Inc
 *
 * This file is subject to the terms and conditions of the GNU Lesser
 * General Public License v2.1. See the file LICENSE in the top level
 * directory for more details.
 */
 
#ifndef CC26X2_CC13X2_SETUP_H
#define CC26X2_CC13X2_SETUP_H
 
#include <cc26xx_cc13xx.h>
 
#ifdef __cplusplus
extern "C" {
#endif
 
#define ROM_API_SETUP ((uint32_t *) (ROM_API_TABLE[28]))
 
#define rom_setup_after_cold_reset_wakeup_from_shutdown_cfg1 \
    ((void (*)(uint32_t mode_conf))ROM_API_SETUP[0])
 
#define rom_setup_after_cold_reset_wakeup_from_shutdown_cfg2 \
    ((void (*)(uint32_t rev, uint32_t mode_conf))ROM_API_SETUP[1])
 
#define rom_setup_after_cold_reset_wakeup_from_shutdown_cfg3 \
    ((void (*)(uint32_t mode_conf))ROM_API_SETUP[2])
 
#define rom_setup_get_trim_for_adc_sh_mode_en \
    ((uint32_t (*)(uint32_t rev))ROM_API_SETUP[3])
 
#define rom_setup_get_trim_for_adc_sh_vbuf_en \
    ((uint32_t (*)(uint32_t rev))ROM_API_SETUP[4])
 
#define rom_setup_get_trim_for_ampcomp_ctrl \
    ((uint32_t (*)(uint32_t rev))ROM_API_SETUP[5])
 
#define rom_setup_get_trim_for_ampcomp_th1 \
    ((uint32_t (*)(void))ROM_API_SETUP[6])
 
#define rom_setup_get_trim_for_ampcomp_th2 \
    ((uint32_t (*)(void))ROM_API_SETUP[7])
 
#define rom_setup_get_trim_for_anabypass_value1 \
    ((uint32_t (*)(uint32_t mode_conf))ROM_API_SETUP[8])
 
#define rom_setup_get_trim_for_dblr_loop_filter_reset_voltage \
    ((uint32_t (*)(uint32_t rev))ROM_API_SETUP[9])
 
#define rom_setup_get_trim_for_radc_ext_cfg \
    ((uint32_t (*)(uint32_t rev))ROM_API_SETUP[10])
 
#define rom_setup_get_trim_for_rc_osc_lf_ibias_trim \
    ((uint32_t (*)(uint32_t rev))ROM_API_SETUP[11])
 
#define rom_setup_get_trim_for_rc_osc_lf_rtune_ctune_trim \
    ((uint32_t (*)(void))ROM_API_SETUP[12])
 
#define rom_setup_get_trim_for_xosc_hf_ctl \
    ((uint32_t (*)(uint32_t rev))ROM_API_SETUP[13])
 
#define rom_setup_get_trim_for_xosc_hf_fast_start \
    ((uint32_t (*)(void))ROM_API_SETUP[14])
 
#define rom_setup_get_trim_for_xosc_hf_ibiastherm \
    ((uint32_t (*)(void))ROM_API_SETUP[15])
 
#define rom_setup_get_trim_for_xosc_lf_regulator_and_cmirrwr_ratio \
    ((uint32_t (*)(uint32_t rev))ROM_API_SETUP[16])
 
#define rom_setup_set_aon_rtc_sub_sec_inc \
    ((void (*)(uint32_t subsecinc))ROM_API_SETUP[17])
 
#define rom_setup_set_cache_mode_according_to_ccfg_setting \
    ((void (*)(void))ROM_API_SETUP[18])
 
#define rom_setup_step_vddr_trim_to \
    ((void (*)(uint32_t tocode))ROM_API_SETUP[19])
void setup_trim_device(void);
 
#ifdef __cplusplus
} /* end extern "C" */
#endif
 
#endif /* CC26X2_CC13X2_SETUP_H */