MTD wrapper for Flashpage devices

Driver for internal flash devices implementing flashpage interface. More...

Detailed Description

Driver for internal flash devices implementing flashpage interface.

The MTD device created by MTD_FLASHPAGE_INIT_VAL spans the complete accessible flash page memory. To expose merely an area of that as a single MTD partition, the MTD address mapper can be used.

Files
file	mtd_flashpage.h
	Interface definition for the flashpage memory driver.

Data Structures
struct	mtd_flashpage_t
	MTD flashpage descriptor. More...

Macros
#define	MTD_FLASHPAGE_INIT_VAL(_pages_per_sector)
	Macro helper to initialize a mtd_t with flashpage driver. More...
#define	MTD_FLASHPAGE_AUX_INIT_VAL(start, len)
	Macro helper to initialize a mtd_t with a portion of the flash. More...
#define	CONFIG_SLOT_AUX_LEN   0
	Size of the auxiliary slot on the internal flash Must align with the flash page size. More...
#define	CONFIG_SLOT_AUX_MTD_OFFSET   1
	Default MTD offset for the AUX slot.

Variables
const mtd_desc_t	mtd_flashpage_driver
	Flashpage MTD device operations table.
mtd_flashpage_t	mtd_flash_aux_slot
	MTD device representing the auxiliary flash slot.
mtd_dev_t *	mtd_aux
	Generic MTD device backed by the auxiliary flash slot.

Macro Definition Documentation

CONFIG_SLOT_AUX_LEN

#define CONFIG_SLOT_AUX_LEN   0

Size of the auxiliary slot on the internal flash Must align with the flash page size.

Note

Don't set this config value directly! Instead set SLOT_AUX_LEN in the board's Makefile.include

This value is fixed and can not be changed in the field / via firmware updates. Changing this value requires re-flashing of riotboot.

Definition at line 106 of file mtd_flashpage.h.

MTD_FLASHPAGE_AUX_INIT_VAL

#define MTD_FLASHPAGE_AUX_INIT_VAL	(		start,
			len
	)

Value:

    {    \
    .base = {                                       \
        .driver = &mtd_flashpage_driver,            \
        .sector_count = len / FLASHPAGE_SIZE,       \
        .pages_per_sector = 1,                      \
        .page_size = FLASHPAGE_SIZE,                \
        .write_size = 1,                            \
    },                                              \
    .offset = start / FLASHPAGE_SIZE,               \
}

Macro helper to initialize a mtd_t with a portion of the flash.

Parameters

[in]	start	Start address of the flash section
[in]	len	Size of the flash section in bytes

Definition at line 56 of file mtd_flashpage.h.

MTD_FLASHPAGE_INIT_VAL

#define MTD_FLASHPAGE_INIT_VAL

(

_pages_per_sector

)

Value:

    { \
    .base = {                                       \
        .driver = &mtd_flashpage_driver,            \
        .sector_count = FLASHPAGE_NUMOF,            \
        .pages_per_sector = _pages_per_sector,      \
        .page_size = FLASHPAGE_SIZE / _pages_per_sector, \
        .write_size = 1                             \
    },                                              \
}

Macro helper to initialize a mtd_t with flashpage driver.

Definition at line 40 of file mtd_flashpage.h.