ina3221_params.h File Reference

Driver configuration parameters for Texas Instruments INA3221 three-channel, high-side current and bus voltage monitor. More...

Detailed Description

Driver configuration parameters for Texas Instruments INA3221 three-channel, high-side current and bus voltage monitor.

Author

Fabian Hüßler fabia.nosp@m.n.hu.nosp@m.essle.nosp@m.r@ov.nosp@m.gu.de

Definition in file ina3221_params.h.

#include "board.h"
#include "ina3221.h"
#include "saul_reg.h"

Include dependency graph for ina3221_params.h:

Go to the source code of this file.

#define	INA3221_PARAM_I2C   (I2C_DEV(0))
	I2C bus index.
#define	INA3221_PARAM_ADDR   (INA3221_ADDR_00)
	I2C device address.
#define	INA3221_PARAM_PIN_WRN   (GPIO_UNDEF)
	Warning alert pin.
#define	INA3221_PARAM_PIN_CRT   (GPIO_UNDEF)
	Critical alert pin.
#define	INA3221_PARAM_PIN_PV   (GPIO_UNDEF)
	Power valid alert pin.
#define	INA3221_PARAM_PIN_TC   (GPIO_UNDEF)
	Timing control alert pin.
#define	INA3221_PARAM_INT_PU_PIN_WRN   (0)
	Enable or disable internal pull up resistor for pin WRN.
#define	INA3221_PARAM_INT_PU_PIN_CRT   (0)
	Enable or disable internal pull up resistor for pin CRT.
#define	INA3221_PARAM_INT_PU_PIN_PV   (0)
	Enable or disable internal pull up resistor for pin PV.
#define	INA3221_PARAM_INT_PU_PIN_TC   (0)
	Enable or disable internal pull up resistor for pin TC.
#define	INA3221_PARAM_CONFIG
	Configuration register value. More...
#define	INA3221_PARAM_RSHUNT_MOHM_CH1   (100)
	Channel 1 shunt resistance.
#define	INA3221_PARAM_RSHUNT_MOHM_CH2   (100)
	Channel 2 shunt resistance.
#define	INA3221_PARAM_RSHUNT_MOHM_CH3   (100)
	Channel 3 shunt resistance.
#define	INA3221_PARAMS
	Default device initialization parameters. More...
#define	INA3221_SAUL_INFO
	SAUL driver information. More...
static const ina3221_params_t	ina3221_params []
	INA3221 array of device configurations. More...
static const saul_reg_info_t	ina3221_saul_info []
	INA3221 array of SAUL driver information. More...

Macro Definition Documentation

INA3221_PARAM_CONFIG

#define INA3221_PARAM_CONFIG

Value:

        (          \
        INA3221_ENABLE_CH1 |               \
        INA3221_ENABLE_CH2 |               \
        INA3221_ENABLE_CH3 |               \
        INA3221_NUM_SAMPLES_4 |            \
        INA3221_CONV_TIME_BADC_4156US |    \
        INA3221_CONV_TIME_SADC_4156US |    \
        INA3221_MODE_CONTINUOUS_SHUNT_BUS  \
        )

Configuration register value.

Definition at line 81 of file ina3221_params.h.

INA3221_PARAMS

#define INA3221_PARAMS

Value:

        {                                                      \
        .i2c = INA3221_PARAM_I2C,                                              \
        .addr = INA3221_PARAM_ADDR,                                            \
        .upins.pins = {                                                        \
            .pin_warn = INA3221_PARAM_PIN_WRN,                                 \
            .pin_crit = INA3221_PARAM_PIN_CRT,                                 \
            .pin_tc = INA3221_PARAM_PIN_TC,                                    \
            .pin_pv = INA3221_PARAM_PIN_PV                                     \
        },                                                                     \
        .gpio_config = (INA3221_PARAM_INT_PU_PIN_WRN << INA3221_ALERT_WRN) |   \
                       (INA3221_PARAM_INT_PU_PIN_CRT << INA3221_ALERT_CRT) |   \
                       (INA3221_PARAM_INT_PU_PIN_TC << INA3221_ALERT_TC)   |   \
                       (INA3221_PARAM_INT_PU_PIN_PV << INA3221_ALERT_PV),      \
        .config = INA3221_PARAM_CONFIG,                                        \
        .rshunt_mohm = {                                                       \
            INA3221_PARAM_RSHUNT_MOHM_CH1,                                     \
            INA3221_PARAM_RSHUNT_MOHM_CH2,                                     \
            INA3221_PARAM_RSHUNT_MOHM_CH3                                      \
        }                                                                      \
}

Default device initialization parameters.

Definition at line 116 of file ina3221_params.h.

INA3221_SAUL_INFO

#define INA3221_SAUL_INFO

Value:

    { .name = "INA3221 bus voltage" }, \
    { .name = "INA3221 current" },                             \
    { .name = "INA3221 power" },                               \
    { .name = "INA3221 shunt voltage sum" }

SAUL driver information.

Definition at line 123 of file ina3221_params.h.

Variable Documentation

ina3221_params

const ina3221_params_t ina3221_params[]

static

Initial value:

= {
    INA3221_PARAMS
}

INA3221 array of device configurations.

Definition at line 129 of file ina3221_params.h.

ina3221_saul_info

const saul_reg_info_t ina3221_saul_info[]

static

Initial value:

= {
    INA3221_SAUL_INFO
}

INA3221 array of SAUL driver information.

Definition at line 136 of file ina3221_params.h.