Board specific configuration for all NRF24L01+ (NG) devices. More...

Detailed Description

Board specific configuration for all NRF24L01+ (NG) devices.

Author: Fabian Hüßler fabia.nosp@m.n.hu.nosp@m.essle.nosp@m.r@ov.nosp@m.gu.de

Definition in file nrf24l01p_ng_params.h.

#include "board.h"
#include "periph/gpio.h"
#include "periph/spi.h"
#include "kernel_defines.h"
#include "nrf24l01p_ng_constants.h"
#include "nrf24l01p_ng.h"

Include dependency graph for nrf24l01p_ng_params.h:

Go to the source code of this file.

#define	NRF24L01P_NG_PARAM_SPI SPI_DEV(0)
	SPI bus.

#define	NRF24L01P_NG_PARAM_SPI_CLK SPI_CLK_5MHZ
	SPI clock speed.

#define	NRF24L01P_NG_PARAM_CS GPIO_UNDEF
	SPI CS gpio pin.

#define	NRF24L01P_NG_PARAM_CE GPIO_UNDEF
	NRF24L01+ chip enable gpio pin.

#define	NRF24L01P_NG_PARAM_IRQ GPIO_UNDEF
	NRF24L01+ interrupt gpio pin.

#define	NRF24L01P_NG_PARAM_CRC_LEN (NRF24L01P_NG_CRC_2BYTE)
	Default CRC length. More...

#define	NRF24L01P_NG_PARAM_TX_POWER (NRF24L01P_NG_TX_POWER_0DBM)
	Default TX power. More...

#define	NRF24L01P_NG_PARAM_DATA_RATE (NRF24L01P_NG_RF_DR_2MBPS)
	Default data rate. More...

#define	NRF24L01P_NG_PARAM_CHANNEL (4)
	Default channel in [0; 124].

#define	NRF24L01P_NG_PARAM_MAX_RETRANSM (5)
	Default number of retransmissions.

#define	NRF24L01P_NG_PARAM_RETRANSM_DELAY (NRF24L01P_NG_ARD_2750US)
	Default retransmission delay. More...

#define	NRF24L01P_NG_PARAMS
	Default NRF24L01+ device parameters. More...

#define	NRF24L01P_NG_NUM ARRAY_SIZE(nrf24l01p_ng_params)
	Number of NRF24L01+ device configurations.

static const nrf24l01p_ng_params_t	nrf24l01p_ng_params []
	Static array that holds NRF24L01+ device configurations. More...

Macro Definition Documentation

◆ NRF24L01P_NG_PARAM_CRC_LEN

#define NRF24L01P_NG_PARAM_CRC_LEN (NRF24L01P_NG_CRC_2BYTE)

Default CRC length.

See also: nrf24l01p_ng_crc_t

Definition at line 71 of file nrf24l01p_ng_params.h.

◆ NRF24L01P_NG_PARAM_DATA_RATE

#define NRF24L01P_NG_PARAM_DATA_RATE (NRF24L01P_NG_RF_DR_2MBPS)

Default data rate.

See also: nrf24l01p_ng_rfdr_t

Definition at line 87 of file nrf24l01p_ng_params.h.

◆ NRF24L01P_NG_PARAM_RETRANSM_DELAY

#define NRF24L01P_NG_PARAM_RETRANSM_DELAY (NRF24L01P_NG_ARD_2750US)

Default retransmission delay.

See also: nrf24l01p_ng_ard_t

Definition at line 109 of file nrf24l01p_ng_params.h.

◆ NRF24L01P_NG_PARAM_TX_POWER

#define NRF24L01P_NG_PARAM_TX_POWER (NRF24L01P_NG_TX_POWER_0DBM)

Default TX power.

See also: nrf24l01p_ng_tx_power_t

Definition at line 79 of file nrf24l01p_ng_params.h.

◆ NRF24L01P_NG_PARAMS

#define NRF24L01P_NG_PARAMS

Value:

        {                                               \
        .spi = NRF24L01P_NG_PARAM_SPI,                                         \
        .spi_clk = NRF24L01P_NG_PARAM_SPI_CLK,                                 \
        .pin_cs = NRF24L01P_NG_PARAM_CS,                                       \
        .pin_ce = NRF24L01P_NG_PARAM_CE,                                       \
        .pin_irq = NRF24L01P_NG_PARAM_IRQ,                                     \
        .config =       {                                                      \
            .cfg_crc = NRF24L01P_NG_PARAM_CRC_LEN,                             \
            .cfg_tx_power = NRF24L01P_NG_PARAM_TX_POWER,                       \
            .cfg_data_rate = NRF24L01P_NG_PARAM_DATA_RATE,                     \
            .cfg_channel = NRF24L01P_NG_PARAM_CHANNEL,                         \
            .cfg_max_retr = NRF24L01P_NG_PARAM_MAX_RETRANSM,                   \
            .cfg_retr_delay = NRF24L01P_NG_PARAM_RETRANSM_DELAY,               \
        }                                                                      \
}

Default NRF24L01+ device parameters.

Definition at line 116 of file nrf24l01p_ng_params.h.

Variable Documentation

◆ nrf24l01p_ng_params

const nrf24l01p_ng_params_t nrf24l01p_ng_params[]

static

Initial value:

= {
    NRF24L01P_NG_PARAMS
}

Static array that holds NRF24L01+ device configurations.

Definition at line 136 of file nrf24l01p_ng_params.h.