41 #define CANDEV_STM32_CHAN_NUMOF 3
43 #define CANDEV_STM32_CHAN_NUMOF 2
44 #elif defined(CAN1) || defined(CAN) || DOXYGEN
45 #define CANDEV_STM32_CHAN_NUMOF 1
47 #error "CAN STM32: CPU not supported"
54 #if defined(CPU_FAM_STM32F1)
55 #define ISR_CAN1_TX isr_usb_hp_can1_tx
56 #define ISR_CAN1_RX0 isr_usb_lp_can1_rx0
57 #define ISR_CAN1_RX1 isr_can1_rx1
58 #define ISR_CAN1_SCE isr_can1_sce
60 #define ISR_CAN1_TX isr_can1_tx
61 #define ISR_CAN1_RX0 isr_can1_rx0
62 #define ISR_CAN1_RX1 isr_can1_rx1
63 #define ISR_CAN1_SCE isr_can1_sce
64 #define ISR_CAN2_TX isr_can2_tx
65 #define ISR_CAN2_RX0 isr_can2_rx0
66 #define ISR_CAN2_RX1 isr_can2_rx1
67 #define ISR_CAN2_SCE isr_can2_sce
68 #define ISR_CAN3_TX isr_can3_tx
69 #define ISR_CAN3_RX0 isr_can3_rx0
70 #define ISR_CAN3_RX1 isr_can3_rx1
71 #define ISR_CAN3_SCE isr_can3_sce
75 #if CANDEV_STM32_CHAN_NUMOF > 1 || DOXYGEN
77 #define CAN_STM32_NB_FILTER 28
79 #define CAN_STM32_NB_FILTER 14
82 #ifndef CANDEV_STM32_DEFAULT_BITRATE
84 #define CANDEV_STM32_DEFAULT_BITRATE 500000U
87 #ifndef CANDEV_STM32_DEFAULT_SPT
89 #define CANDEV_STM32_DEFAULT_SPT 875
98 #ifndef CPU_FAM_STM32F1
102 #if CANDEV_STM32_CHAN_NUMOF > 1 || defined(DOXYGEN)
113 #if defined(CPU_FAM_STM32F0)
131 #define HAVE_CAN_CONF_T
134 #define CAN_STM32_TX_MAILBOXES 3
136 #define CAN_STM32_RX_MAILBOXES 2
138 #ifndef CAN_STM32_RX_MAIL_FIFO
140 #define CAN_STM32_RX_MAIL_FIFO 12
176 #ifndef CPU_FAM_STM32F1
Definitions for low-level CAN driver interface.
#define CAN_STM32_TX_MAILBOXES
The number of transmit mailboxes.
#define CAN_STM32_RX_MAIL_FIFO
This is the maximum number of frame the driver can receive simultaneously.
void candev_stm32_set_pins(can_t *dev, gpio_t tx_pin, gpio_t rx_pin, gpio_af_t af)
Set the pins of an stm32 CAN device.
struct candev_stm32_rx_fifo candev_stm32_rx_fifo_t
This structure holds anything related to the receive part.
struct candev_stm32_isr candev_stm32_isr_t
Internal interrupt flags.
gpio_af_t
Override alternative GPIO mode options.
struct candev_conf can_conf_t
Linux candev configuration.
ESP CAN device configuration.
CAN_TypeDef * can
CAN device.
uint8_t nb_filters
Number of filters to use.
uint8_t nart
No automatic retransmission.
uint8_t first_filter
First filter in the bank.
uint8_t sce_irqn
SCE IRQ channel.
uint8_t txfp
Transmit FIFO priority.
uint8_t rx0_irqn
RX0 IRQ channel.
uint32_t rcc_mask
RCC mask to enable clock.
uint8_t rx1_irqn
RX1 IRQ channel.
uint8_t abom
Automatic bus-off management.
uint8_t tx_irqn
TX IRQ channel.
uint8_t awum
Automatic wakeup mode.
CAN_TypeDef * can_master
Master CAN device.
gpio_af_t af
Alternate pin function to use.
bool en_deep_sleep_wake_up
Enable deep-sleep wake-up interrupt.
uint32_t master_rcc_mask
Master device RCC mask.
uint8_t rflm
Receive FIFO locked mode.
uint8_t ttcm
Time triggered communication mode.
uint8_t lbkm
Loopback mode.
Controller Area Network frame.
Low level device structure for ESP32 CAN (extension of candev_t)
const struct can_frame * tx_mailbox[CAN_STM32_TX_MAILBOXES]
Tx mailboxes.
candev_stm32_rx_fifo_t rx_fifo
Rx FIFOs.
candev_stm32_isr_t isr_flags
ISR flags.
candev_t candev
candev base structure
const can_conf_t * conf
Configuration.
gpio_af_t af
Alternate pin function to use.
Internal interrupt flags.
int isr_rx
Rx FIFO interrupt.
int isr_tx
Tx mailboxes interrupt.
int isr_wkup
Wake up interrupt.
This structure holds anything related to the receive part.
int write_idx
Write index in the receive FIFO.
int read_idx
Read index in the receive FIFO.
struct can_frame frame[CAN_STM32_RX_MAIL_FIFO]
Receive FIFO.
int is_full
Flag set when the FIFO is full.
Structure to hold driver state.