lm75_regs.h File Reference
Registers for the lm75 and derived (lm75a and tmp1075) temperature sensors. More...
Detailed Description
Registers for the lm75 and derived (lm75a and tmp1075) temperature sensors.
Definition in file lm75_regs.h.
This graph shows which files directly or indirectly include this file:Go to the source code of this file.
| #define | LM75_TEMP_REG (0x00) |
| Temperature register pointer. | |
| #define | LM75_CONF_REG (0x01) |
| Configuration register pointer. | |
| #define | LM75_THYST_REG (0x02) |
| Hysteresis register pointer. | |
| #define | LM75_TOS_REG (0x03) |
| Overtemperature shutdown register pointer. | |
| #define | NORMAL_MODE 0 |
| Continuous conversion mode. | |
| #define | SHUTDOWN_MODE 1 |
| Shutdown mode ON. | |
| #define | COMPARATOR_MODE 0 |
| OS operation in comparator mode. | |
| #define | INTERRUPT_MODE 1 |
| OS operation in interrupt mode. | |
| #define | OS_ACTIVE_LOW 0 |
| OS pin active on Low voltage. | |
| #define | OS_ACTIVE_HIGH 1 |
| OS pin active on positive voltage. | |
| #define | FAULT_1 0 |
| OS/ALERT active after 1 fault. | |
| #define | FAULT_2 1 |
| OS/ALERT active after 2 faults. | |
| #define | FAULT_4 2 |
| OS active after 4 faults. | |
| #define | FAULT_6 3 |
| OS active after 6 faults. | |
| #define | TMP1075_DEVICE_ID_REG (0x0F) |
| ID register pointer. | |
| #define | FAULT_3 2 |
| ALERT active after 3 faults. | |
| #define | FAULT_4_TMP1075 3 |
| ALERT active after 4 faults. | |
| #define | TMP1075_CONV_RATE_REG_27H 0 |
| 27.5ms conversion rate | |
| #define | TMP1075_CONV_RATE_REG_55 1 |
| 55ms conversion rate | |
| #define | TMP1075_CONV_RATE_REG_110 2 |
| 110ms conversion rate | |
| #define | TMP1075_CONV_RATE_REG_220 3 |
| 220ms conversion rate | |
