Driver for the Microchip MCP2515 can controller. More...

Detailed Description

Driver for the Microchip MCP2515 can controller.

Definition of the MCP2515 SPI driver.

Author: Toon Stegen toon..nosp@m.steg.nosp@m.en@al.nosp@m.tran.nosp@m..com

Definition in file mcp2515_spi.h.

#include <stdint.h>
#include "candev_mcp2515.h"

Include dependency graph for mcp2515_spi.h:

Go to the source code of this file.

int	mcp2515_spi_init (const candev_mcp2515_t *dev)
	Initialize SPI interface. More...

int	mcp2515_spi_reset (const candev_mcp2515_t *dev)
	Reset MCP2515 device though SPI interface. More...

int	mcp2515_spi_read (const candev_mcp2515_t dev, uint8_t addr, uint8_t buf, unsigned int len)
	Read the register value corresponding to `addr`. More...

int	mcp2515_spi_read_rxbuf (const candev_mcp2515_t dev, uint8_t mailbox, void buf, uint8_t len)
	Read the can data received in the rx `mailbox`. More...

int	mcp2515_spi_write (const candev_mcp2515_t dev, uint8_t addr, uint8_t buf, unsigned int len)
	Send the register value corresponding to `addr`. More...

int	mcp2515_spi_write_txbuf (const candev_mcp2515_t dev, uint8_t mailbox, void buf, uint8_t len)
	Send the can data to the tx `mailbox`. More...

int	mcp2515_spi_rts (const candev_mcp2515_t *dev, uint8_t mailbox)
	Initiate message transmission. More...

uint8_t	mcp2515_spi_read_status (const candev_mcp2515_t *dev)
	Read MCP2515 status over SPI interface. More...

int	mcp2515_spi_rx_status (const candev_mcp2515_t *dev)
	Read MCP2515 receive status over SPI interface. More...

int	mcp2515_spi_bitmod (const candev_mcp2515_t *dev, uint8_t addr, uint8_t mask, uint8_t buf)
	Bit modify instruction. More...

Function Documentation

◆ mcp2515_spi_bitmod()

int mcp2515_spi_bitmod	(	const candev_mcp2515_t *	dev,
		uint8_t	addr,
		uint8_t	mask,
		uint8_t	buf
	)

Bit modify instruction.

The Bit Modify instruction provides a means for setting or clearing individual bits in specific status and control registers. This command is not available for all registers. Executing this command on registers that are not bit-modifiable will force the mask to FFh.

Parameters

[in]	dev	device descriptor
[in]	addr	register address
[in]	mask	mask to modify individual bit
[in]	buf	register value

Returns: 0 on success; <0 on error

◆ mcp2515_spi_init()

int mcp2515_spi_init ( const candev_mcp2515_t * dev )

Initialize SPI interface.

The device descriptor contains all information related to the SPI interface.

Parameters

[out] dev device descriptor

Returns: 0 on success; <0 on error

◆ mcp2515_spi_read()

int mcp2515_spi_read	(	const candev_mcp2515_t *	dev,
		uint8_t	addr,
		uint8_t *	buf,
		unsigned int	len
	)

Read the register value corresponding to addr.

Parameters

[in]	dev	device descriptor
[in]	addr	register addr
[out]	buf	buffer to receive register value
[in]	len	length of register value

Returns: 0 on success; <0 on error

◆ mcp2515_spi_read_rxbuf()

int mcp2515_spi_read_rxbuf	(	const candev_mcp2515_t *	dev,
		uint8_t	mailbox,
		void *	buf,
		uint8_t	len
	)

Read the can data received in the rx mailbox.

Parameters

[in]	dev	device descriptor
[in]	mailbox	rx mailbox
[out]	buf	buffer to receive can data
[in]	len	length of can data

Returns: 0 on success; <0 on error

◆ mcp2515_spi_read_status()

uint8_t mcp2515_spi_read_status ( const candev_mcp2515_t * dev )

Read MCP2515 status over SPI interface.

Parameters

[in] dev device descriptor

Returns: the read status

◆ mcp2515_spi_reset()

int mcp2515_spi_reset ( const candev_mcp2515_t * dev )

Reset MCP2515 device though SPI interface.

The MCP2515 device is reset by sending the right message over SPI interface.

Parameters

[in] dev device descriptor

Returns: 0 on success; <0 on error

◆ mcp2515_spi_rts()

int mcp2515_spi_rts	(	const candev_mcp2515_t *	dev,
		uint8_t	mailbox
	)

Initiate message transmission.

The RTS command can be used to initiate message transmission for one or more of the transmit buffers.

Parameters

[in]	dev	device descriptor
[in]	mailbox	mailbox to enable transmission

Returns: 0 on success; <0 on error

◆ mcp2515_spi_rx_status()

int mcp2515_spi_rx_status ( const candev_mcp2515_t * dev )

Read MCP2515 receive status over SPI interface.

Parameters

[in] dev device descriptor

Returns: 0 on success; <0 on error

◆ mcp2515_spi_write()

int mcp2515_spi_write	(	const candev_mcp2515_t *	dev,
		uint8_t	addr,
		uint8_t *	buf,
		unsigned int	len
	)

Send the register value corresponding to addr.

Parameters

[in]	dev	device descriptor
[in]	addr	address to write
[in]	buf	buffer containing register data
[in]	len	buffer length

Returns: 0 on success; <0 on error

◆ mcp2515_spi_write_txbuf()

int mcp2515_spi_write_txbuf	(	const candev_mcp2515_t *	dev,
		uint8_t	mailbox,
		void *	buf,
		uint8_t	len
	)

Send the can data to the tx mailbox.

Parameters

[in]	dev	device descriptor
[in]	mailbox	tx mailbox
[in]	buf	buffer containing can data
[in]	len	buffer length

Returns: 0 on success; <0 on error