pca9685.h
Go to the documentation of this file.
1 /*
2  * Copyright (C) 2018 Gunar Schorcht
3  *
4  * This file is subject to the terms and conditions of the GNU Lesser
5  * General Public License v2.1. See the file LICENSE in the top level
6  * directory for more details.
7  */
8 
9 #pragma once
10 
86 #ifdef __cplusplus
87 extern "C"
88 {
89 #endif
90 
91 #include <stdbool.h>
92 #include <stdint.h>
93 
94 #include "periph/gpio.h"
95 #include "periph/i2c.h"
96 #include "periph/pwm.h"
97 
114 #define PCA9685_I2C_BASE_ADDR (0x40)
115 #define PCA9685_I2C_ALLCALLADDR (0x70)
116 #define PCA9685_I2C_SUBADR1 (0x71)
117 #define PCA9685_I2C_SUBADR2 (0x72)
118 #define PCA9685_I2C_SUBADR3 (0x73)
124 #define PCA9685_CHANNEL_NUM (16U)
125 
129 #define PCA9685_RESOLUTION (1 << 12)
130 
134 #define PCA9685_OSC_FREQ (25000000)
135 
139 #define PCA9685_EXT_FERQ_MAX (50000000)
140 
144 typedef enum {
148 
154 typedef enum {
158 
165 typedef enum {
167  PCA9685_OUT_DRV = 1,
173 
177 typedef struct {
178 
180  uint8_t i2c_addr;
184  uint32_t freq;
185  uint16_t res;
187  bool inv;
189  uint32_t ext_freq;
190  gpio_t oe_pin;
196 
200 typedef struct {
201 
203  bool powered_on;
205 } pca9685_t;
206 
207 #if MODULE_SAUL || DOXYGEN
211 typedef struct {
212  const char *name;
213  unsigned int dev;
214  uint8_t channel;
215  uint16_t initial;
217 #endif
218 
233 int pca9685_init(pca9685_t *dev, const pca9685_params_t *params);
234 
258 uint32_t pca9685_pwm_init(pca9685_t *dev, pwm_mode_t mode, uint32_t freq,
259  uint16_t res);
260 
276 void pca9685_pwm_set(pca9685_t *dev, uint8_t channel, uint16_t value);
277 
290 
304 
310 static inline uint8_t pca9685_pwm_channels(pca9685_t *dev)
311 {
312  (void)dev;
313  return PCA9685_CHANNEL_NUM;
314 }
315 
316 #ifdef __cplusplus
317 }
318 #endif
319 
pwm_mode_t
Definition: periph_conf.h:219
Low-level GPIO peripheral driver interface definitions.
pca9685_out_ne_t
PCA9685 output-not-enabled mode.
Definition: pca9685.h:165
void pca9685_pwm_poweroff(pca9685_t *dev)
Stop the PWM generation on the given PCA9685 device.
pca9685_out_drv_t
PCA9685 output driver mode.
Definition: pca9685.h:154
#define PCA9685_CHANNEL_NUM
Number of PWM channels provided by PCA9685.
Definition: pca9685.h:124
void pca9685_pwm_poweron(pca9685_t *dev)
Resume PWM generation on the given PCA9685 device.
void pca9685_pwm_set(pca9685_t *dev, uint8_t channel, uint16_t value)
Set the duty-cycle for a given channel or all channels of the given PCA9685 PWM device.
pca9685_error_t
PCA9685 driver error codes.
Definition: pca9685.h:144
uint32_t pca9685_pwm_init(pca9685_t *dev, pwm_mode_t mode, uint32_t freq, uint16_t res)
Initialize the PCA9685 PWM device.
static uint8_t pca9685_pwm_channels(pca9685_t *dev)
Get the number of available channels of the given PCA9685 device.
Definition: pca9685.h:310
int pca9685_init(pca9685_t *dev, const pca9685_params_t *params)
Initialize the PCA9685 PWM device driver.
@ PCA9685_OUT_DRV
Outputs depend on the output driver mode pca9685_params_t::out_drv.
Definition: pca9685.h:167
@ PCA9685_HIHGH_Z
If /OE pin is HIGH, outputs are high-impedance.
Definition: pca9685.h:171
@ PCA9685_OFF
If /OE pin is HIGH, outputs are LOW.
Definition: pca9685.h:166
@ PCA9685_TOTEM_POLE
Totem pole structure output.
Definition: pca9685.h:156
@ PCA9685_OPEN_DRAIN
Open-drain structure output.
Definition: pca9685.h:155
@ PCA9685_ERROR_I2C
I2C communication error.
Definition: pca9685.h:146
@ PCA9685_OK
Success.
Definition: pca9685.h:145
uint_fast8_t i2c_t
Default i2c_t type definition.
Definition: i2c.h:144
Low-level I2C peripheral driver interface definition.
Low-level PWM peripheral driver interface definitions.
PCA9685 device initialization parameters.
Definition: pca9685.h:177
uint8_t i2c_addr
I2C slave address.
Definition: pca9685.h:180
uint32_t ext_freq
If not 0, EXTCLK pin is used with this frequency.
Definition: pca9685.h:189
i2c_t i2c_dev
I2C device, default I2C_DEV(0)
Definition: pca9685.h:179
uint16_t res
PWM resolution (default 4096)
Definition: pca9685.h:185
bool inv
Invert outputs, e.g., for LEDs (default yes)
Definition: pca9685.h:187
gpio_t oe_pin
Active LOW output enable pin /OE.
Definition: pca9685.h:190
uint32_t freq
PWM frequency in Hz (default 100)
Definition: pca9685.h:184
pca9685_out_ne_t out_ne
Output-not-enabled mode.
Definition: pca9685.h:193
pca9685_out_drv_t out_drv
Output driver mode.
Definition: pca9685.h:192
pwm_mode_t mode
PWM mode for all channels: PWM_LEFT, PWM_CENTER, PWM_RIGHT supported, (default PWM_CENTER)
Definition: pca9685.h:182
PCA9685 configuration structure for mapping PWM channels to SAUL.
Definition: pca9685.h:211
const char * name
name of the PCA9685 device
Definition: pca9685.h:212
uint16_t initial
initial duty-cycle value
Definition: pca9685.h:215
uint8_t channel
channel of the PCA9685 device
Definition: pca9685.h:214
unsigned int dev
index of the PCA9685 device
Definition: pca9685.h:213
PCA9685 PWM device data structure type.
Definition: pca9685.h:200
bool powered_on
Devices is powered on if true.
Definition: pca9685.h:203
pca9685_params_t params
Device initialization parameters.
Definition: pca9685.h:202