Board specific definitions for the Adafruit Grand Central M4 Express. More...

Detailed Description

Board specific definitions for the Adafruit Grand Central M4 Express.

Definition in file board.h.

#include "cpu.h"
#include "periph/gpio.h"

Include dependency graph for board.h:

This graph shows which files directly or indirectly include this file:

LED pin definitions and handlers
#define	LED0_PIN GPIO_PIN(PB, 1)
	User LED red (D13)

#define	LED1_PIN GPIO_PIN(PC, 30)
	TX LED yellow.

#define	LED2_PIN GPIO_PIN(PC, 31)
	RX LED yellow.

#define	LED0_PORT PORT->Group[PB]
	Port of User LED red (D13)

#define	LED0_MASK (1 << 1)
	Mask of User LED red (D13)

#define	LED1_PORT PORT->Group[PC]
	Port of TX LED yellow.

#define	LED1_MASK (1 << 30)
	Mask of TX LED yellow.

#define	LED2_PORT PORT->Group[PC]
	Port of RX LED yellow.

#define	LED2_MASK (1 << 31)
	Mask of RX LED yellow.

#define	LED0_ON (LED0_PORT.OUTSET.reg = LED0_MASK)
	Switch on User LED red (D13)

#define	LED0_OFF (LED0_PORT.OUTCLR.reg = LED0_MASK)
	Switch off User LED red (D13)

#define	LED0_TOGGLE (LED0_PORT.OUTTGL.reg = LED0_MASK)
	Toggle User LED red (D13)

#define	LED1_ON (LED1_PORT.OUTCLR.reg = LED1_MASK)
	Switch on TX LED yellow.

#define	LED1_OFF (LED1_PORT.OUTSET.reg = LED1_MASK)
	Switch off TX LED yellow.

#define	LED1_TOGGLE (LED1_PORT.OUTTGL.reg = LED1_MASK)
	Toggle TX LED yellow.

#define	LED2_ON (LED2_PORT.OUTCLR.reg = LED2_MASK)
	Switch on RX LED yellow.

#define	LED2_OFF (LED2_PORT.OUTSET.reg = LED2_MASK)
	Switch off RX LED yellow.

#define	LED2_TOGGLE (LED2_PORT.OUTTGL.reg = LED2_MASK)
	Toggle User RX LED yellow.

#define	WS281X_PARAM_PIN GPIO_PIN(PC, 24)
	GPIO pin connected to the data pin.

#define	WS281X_PARAM_NUMOF (1U)
	Number of LEDs chained.

MTD configuration
#define	MTD_0 mtd_dev_get(0)
	MTD device for the 8 MByte QSPI Flash.

#define	MTD_1 mtd_dev_get(1)
	MTD device for the SD Card.

#define	CONFIG_SDCARD_GENERIC_MTD_OFFSET 1
	MTD_1 is used for SD Card.

SD-Card interface configuration
The SD-Card interface is connected to SPI_DEV(1).
#define	SDCARD_SPI_PARAM_SPI SPI_DEV(1)

#define	SDCARD_SPI_PARAM_CLK GPIO_PIN(PB, 27)

#define	SDCARD_SPI_PARAM_MOSI GPIO_PIN(PB, 26)

#define	SDCARD_SPI_PARAM_MISO GPIO_PIN(PB, 29)

#define	SDCARD_SPI_PARAM_CS GPIO_PIN(PB, 28)

#define	SDCARD_SPI_PARAM_POWER GPIO_UNDEF

LED pin definitions and handlers