Device driver for Texas Instruments INA3221 three-channel, high-side current and bus voltage monitor. More...

Detailed Description

Device driver for Texas Instruments INA3221 three-channel, high-side current and bus voltage monitor.

Files
file	ina3221_defines.h
	Internal definitions for Texas Instruments INA3221 three-channel, high-side current and bus voltage monitor.

file	ina3221_internal.h
	Functions to convert register values of INA3221 to actual voltage values and vice versa.

file	ina3221_params.h
	Driver configuration parameters for Texas Instruments INA3221 three-channel, high-side current and bus voltage monitor.

file	ina3221_regs.h
	Register definitions for Texas Instruments INA3221 three-channel, high-side current and bus voltage monitor.

file	ina3221.h
	Device driver interface for Texas Instruments INA3221 three-channel, high-side current and bus voltage monitor.

Data Structures
struct	ina3221_params_t
	INA3221 device parameters. More...

struct	ina3221_t
	INA3221 device handle struct. More...

Macros
#define	INA3221_NUM_CH (3)
	Number of channels.

#define	INA3221_NUM_ALERTS (4)
	Number of alerts.

#define	INA3221_MODE_MASK (0x0007)
	Device operation mode bit mask.

#define	INA3221_CONV_TIME_SADC_MASK (0x0038)
	ADC shunt voltage conversion times bit mask.

#define	INA3221_CONV_TIME_BADC_MASK (0x01C0)
	ADC bus voltage conversion times bit mask.

#define	INA3221_NUM_SAMPLES_MASK (0x0E00)
	Number of samples to calculate average shunt/bus voltage value bit mask.

#define	INA3221_ENABLE_CH_MASK
	Enable channel bit mask. More...

#define	INA3221_ENABLE_SUM_CH_MASK
	Enable shunt voltage sum calculation channel bit mask. More...

#define	INA3221_ENABLE_LATCH_MASK
	Enable latch bit mask. More...

#define	INA3221_DEFCONFIG (0x7127)
	Default configuration register value.

#define	INA3221_RESET (0x8000)
	Reset configuration register value.

#define	INA3221_FLAG_CRIT_ALERT_CH1 (0x0200)
	Critical alert channel 1 flag.

#define	INA3221_FLAG_CRIT_ALERT_CH2 (0x0100)
	Critical alert channel 2 flag.

#define	INA3221_FLAG_CRIT_ALERT_CH3 (0x0080)
	Critical alert channel 3 flag.

#define	INA3221_FLAG_SHUNT_SUM_ALERT (0x0040)
	Alert channel sum flag.

#define	INA3221_FLAG_WARN_ALERT_CH1 (0x0020)
	Warning alert channel 1 flag.

#define	INA3221_FLAG_WARN_ALERT_CH2 (0x0010)
	Warning alert channel 2 flag.

#define	INA3221_FLAG_WARN_ALERT_CH3 (0x0008)
	Warning alert channel 3 flag.

#define	INA3221_FLAG_POWER_VALID (0x0004)
	Power valid flag.

#define	INA3221_FLAG_TIMING_CONTROL (0x0002)
	Timing Control flag.

#define	INA3221_FLAG_CONV_READY (0x0001)
	Conversion ready flag.

#define	INA3221_FLAGS_MASK
	Flags bit mask. More...

#define	INA3221_TRIGGER_SHUNT(dev) ina3221_set_mode(dev, INA3221_MODE_TRIGGER_SHUNT_ONLY)
	Set operation mode to INA3221_MODE_TRIGGER_SHUNT_ONLY to trigger shunt voltage measurement. More...

#define	INA3221_TRIGGER_BUS(dev) ina3221_set_mode(dev, INA3221_MODE_TRIGGER_BUS_ONLY)
	Set operation mode to INA3221_MODE_TRIGGER_BUS_ONLY to trigger bus voltage measurement. More...

#define	INA3221_TRIGGER_SHUNT_AND_BUS(dev) ina3221_set_mode(dev, INA3221_MODE_TRIGGER_SHUNT_BUS)
	Set operation mode to INA3221_MODE_TRIGGER_SHUNT_BUS to trigger shunt and bus voltage measurement. More...

Typedefs
typedef void(*	ina3221_alert_cb_t) (void *arg)
	INA3221 alert callback for alert pins CRT, WRN, TC, PV.

typedef enum ina3221_dev_addr	ina3221_dev_addr_t
	I2C device addresses.

typedef enum ina3221_channel	ina3221_channel_t
	Channel flags.

typedef enum ina3221_alert	ina3221_alert_t
	Alert indices.

typedef enum ina3221_mode	ina3221_mode_t
	Device operation modes.

typedef enum ina3221_conv_time_shunt_adc	ina3221_conv_time_shunt_adc_t
	ADC shunt voltage conversion times.

typedef enum ina3221_conv_time_bus_adc	ina3221_conv_time_bus_adc_t
	ADC bus voltage conversion times.

typedef enum ina3221_num_samples	ina3221_num_samples_t
	Number of samples to calculate average shunt/bus voltage value.

typedef enum ina3221_enable_ch	ina3221_enable_ch_t
	Enable channel flags.

typedef enum ina3221_enable_sum_ch	ina3221_enable_sum_ch_t
	Enable shunt voltage sum calculation channel flags.

typedef enum ina3221_enable_latch	ina3221_enable_latch_t
	Enable latch flags.

typedef unsigned	ina3221_ch_t
	Flags ina3221_channel_t.

Enumerations
enum	ina3221_dev_addr { INA3221_ADDR_00 = 0x40 , INA3221_ADDR_01 = 0x41 , INA3221_ADDR_10 = 0x42 , INA3221_ADDR_11 = 0x43 }
	I2C device addresses. More...

enum	ina3221_channel { INA3221_CH1 = (1U << 0) , INA3221_CH2 = (1U << 1) , INA3221_CH3 = (1U << 2) }
	Channel flags. More...

enum	ina3221_alert { INA3221_ALERT_WRN = 0 , INA3221_ALERT_CRT = 1 , INA3221_ALERT_TC = 2 , INA3221_ALERT_PV = 3 }
	Alert indices. More...

enum	ina3221_mode { INA3221_MODE_POWER_DOWN = 0x0000 , INA3221_MODE_TRIGGER_SHUNT_ONLY = 0x0001 , INA3221_MODE_TRIGGER_BUS_ONLY = 0x0002 , INA3221_MODE_TRIGGER_SHUNT_BUS = 0x0003 , INA3221_MODE_POWER_DOWN_ = 0x0004 , INA3221_MODE_CONTINUOUS_SHUNT_ONLY = 0x0005 , INA3221_MODE_CONTINUOUS_BUS_ONLY = 0x0006 , INA3221_MODE_CONTINUOUS_SHUNT_BUS = 0x0007 }
	Device operation modes. More...

enum	ina3221_conv_time_shunt_adc { INA3221_CONV_TIME_SADC_140US = 0x0000 , INA3221_CONV_TIME_SADC_204US = 0x0008 , INA3221_CONV_TIME_SADC_332US = 0x0010 , INA3221_CONV_TIME_SADC_588US = 0x0018 , INA3221_CONV_TIME_SADC_1100US = 0x0020 , INA3221_CONV_TIME_SADC_2116US = 0x0028 , INA3221_CONV_TIME_SADC_4156US = 0x0030 , INA3221_CONV_TIME_SADC_8244US = 0x0038 }
	ADC shunt voltage conversion times. More...

enum	ina3221_conv_time_bus_adc { INA3221_CONV_TIME_BADC_140US = 0x0000 , INA3221_CONV_TIME_BADC_204US = 0x0040 , INA3221_CONV_TIME_BADC_332US = 0x0080 , INA3221_CONV_TIME_BADC_588US = 0x00C0 , INA3221_CONV_TIME_BADC_1100US = 0x0100 , INA3221_CONV_TIME_BADC_2116US = 0x0140 , INA3221_CONV_TIME_BADC_4156US = 0x0180 , INA3221_CONV_TIME_BADC_8244US = 0x01C0 }
	ADC bus voltage conversion times. More...

enum	ina3221_num_samples { INA3221_NUM_SAMPLES_1 = 0x0000 , INA3221_NUM_SAMPLES_4 = 0x0200 , INA3221_NUM_SAMPLES_16 = 0x0400 , INA3221_NUM_SAMPLES_64 = 0x0600 , INA3221_NUM_SAMPLES_128 = 0x0800 , INA3221_NUM_SAMPLES_256 = 0x0A00 , INA3221_NUM_SAMPLES_512 = 0x0C00 , INA3221_NUM_SAMPLES_1024 = 0x0E00 }
	Number of samples to calculate average shunt/bus voltage value. More...

enum	ina3221_enable_ch { INA3221_ENABLE_CH1 = 0x4000 , INA3221_ENABLE_CH2 = 0x2000 , INA3221_ENABLE_CH3 = 0x1000 }
	Enable channel flags. More...

enum	ina3221_enable_sum_ch { INA3221_ENABLE_SUM_CH1 = 0x4000 , INA3221_ENABLE_SUM_CH2 = 0x2000 , INA3221_ENABLE_SUM_CH3 = 0x1000 }
	Enable shunt voltage sum calculation channel flags. More...

enum	ina3221_enable_latch { INA3221_ENABLE_WARN_LATCH = 0x0800 , INA3221_ENABLE_CRIT_LATCH = 0x0400 }
	Enable latch flags. More...

Functions
int	ina3221_reset (ina3221_t *dev)
	Reset device, i.e. More...

int	ina3221_init (ina3221_t dev, const ina3221_params_t params)
	Initialize device. More...

int	ina3221_enable_alert (ina3221_t dev, ina3221_alert_t alert, ina3221_alert_cb_t cb, void arg)
	Enable alert and set callback and argument for alert `alert`. More...

static int	ina3221_enable_warning_alert (ina3221_t dev, ina3221_alert_cb_t cb, void arg)
	Wrapper around ina3221_enable_alert, to enable warning alert. More...

static int	ina3221_enable_critical_alert (ina3221_t dev, ina3221_alert_cb_t cb, void arg)
	Wrapper around ina3221_enable_alert, to enable critical alert. More...

static int	ina3221_enable_timing_control_alert (ina3221_t dev, ina3221_alert_cb_t cb, void arg)
	Wrapper around ina3221_enable_alert, to enable timing control alert. More...

static int	ina3221_enable_power_valid_alert (ina3221_t dev, ina3221_alert_cb_t cb, void arg)
	Wrapper around ina3221_enable_alert, to enable power valid alert. More...

int	ina3221_disable_alert (ina3221_t *dev, ina3221_alert_t alert)
	Disable alert `alert`. More...

static int	ina3221_disable_warning_alert (ina3221_t *dev)
	Wrapper around ina3221_disable_alert, to disable warning alert. More...

static int	ina3221_disable_critical_alert (ina3221_t *dev)
	Wrapper around ina3221_disable_alert, to disable critical alert. More...

static int	ina3221_disable_timing_control_alert (ina3221_t *dev)
	Wrapper around ina3221_disable_alert, to disable timing control alert. More...

static int	ina3221_disable_power_valid_alert (ina3221_t *dev)
	Wrapper around ina3221_disable_alert, to disable power valid alert. More...

static ina3221_ch_t	ina3221_config_get_enabled_channels (uint16_t cfg)
	Get enabled measurement channels from configuration value. More...

static void	ina3221_config_set_enabled_channels (uint16_t *cfg, ina3221_ch_t ch)
	Enable measurement channels in configuration value. More...

static ina3221_num_samples_t	ina3221_config_get_num_samples (uint16_t cfg)
	Get number of samples from configuration value. More...

static void	ina3221_config_set_num_samples (uint16_t *cfg, ina3221_num_samples_t ns)
	Set number of samples in configuration value. More...

static ina3221_conv_time_bus_adc_t	ina3221_config_get_conv_time_bus (uint16_t cfg)
	Get bus voltage conversion time from configuration value. More...

static void	ina3221_config_set_conv_time_bus (uint16_t *cfg, ina3221_conv_time_bus_adc_t bus)
	Set bus voltage conversion time in configuration value. More...

static ina3221_conv_time_shunt_adc_t	ina3221_config_get_conv_time_shunt (uint16_t cfg)
	Get shunt voltage conversion time from configuration value. More...

static void	ina3221_config_set_conv_time_shunt (uint16_t *cfg, ina3221_conv_time_shunt_adc_t shunt)
	Set shunt voltage conversion time in configuration value. More...

static ina3221_mode_t	ina3221_config_get_mode (uint16_t cfg)
	Get operation mode from configuration value. More...

static void	ina3221_config_set_mode (uint16_t *cfg, ina3221_mode_t mode)
	Set operation mode in configuration value. More...

int	ina3221_set_config (ina3221_t *dev, uint16_t cfg)
	Write configuration register value to configuration register. More...

int	ina3221_get_config (const ina3221_t dev, uint16_t cfg)
	Read currently saved configuration register value. More...

int	ina3221_set_enable_channel (ina3221_t *dev, ina3221_ch_t ch)
	Enable channels. More...

static void	ina3221_get_enable_channel (const ina3221_t dev, ina3221_ch_t ch)
	Read which channels are currently enabled. More...

int	ina3221_set_num_samples (ina3221_t *dev, ina3221_num_samples_t ns)
	Update number of samples and write to configuration register. More...

static void	ina3221_get_num_samples (const ina3221_t dev, ina3221_num_samples_t ns)
	Read currently applied number of samples. More...

int	ina3221_set_conv_time_bus_adc (ina3221_t *dev, ina3221_conv_time_bus_adc_t ctb)
	Update conversion time of bus voltage ADC and write to configuration register. More...

static void	ina3221_get_conv_time_bus_adc (const ina3221_t dev, ina3221_conv_time_bus_adc_t ctb)
	Read currently applied bus voltage ADC conversion time. More...

int	ina3221_set_conv_time_shunt_adc (ina3221_t *dev, ina3221_conv_time_shunt_adc_t cts)
	Update conversion time of shunt voltage ADC and write to configuration register. More...

static void	ina3221_get_conv_time_shunt_adc (const ina3221_t dev, ina3221_conv_time_shunt_adc_t cts)
	Read currently applied shunt voltage ADC conversion time. More...

int	ina3221_set_mode (ina3221_t *dev, ina3221_mode_t mode)
	Update device operation mode. More...

static void	ina3221_get_mode (const ina3221_t dev, ina3221_mode_t mode)
	Read currently applied device operation mode. More...

int	ina3221_set_enable_sum_channel (const ina3221_t *dev, ina3221_ch_t ch)
	Enable channels for shunt voltage sum calculation. More...

int	ina3221_get_enable_sum_channel (const ina3221_t dev, ina3221_ch_t ch)
	Read enabled channels for shunt voltage sum calculation. More...

int	ina3221_set_latch (const ina3221_t *dev, bool warn, bool crit)
	Enable latches for critical/warning alert pins. More...

int	ina3221_get_latch (const ina3221_t dev, bool warn, bool *crit)
	Read enabled latches for critical/warning alert pins. More...

ina3221_ch_t	ina3221_set_crit_alert_limit (const ina3221_t *dev, ina3221_ch_t ch, int32_t in_uv)
	Set critical shunt voltage alert limit to `in_uv` for each channel in `ch`. More...

ina3221_ch_t	ina3221_get_crit_alert_limit (const ina3221_t *dev, ina3221_ch_t ch, int32_t out_uv[INA3221_NUM_CH])
	Read critical shunt voltage alert limit for each channel in `ch`. More...

ina3221_ch_t	ina3221_set_warn_alert_limit (const ina3221_t *dev, ina3221_ch_t ch, int32_t in_uv)
	Set warning shunt voltage alert limit to `in_uv` for each channel in `ch`. More...

ina3221_ch_t	ina3221_get_warn_alert_limit (const ina3221_t *dev, ina3221_ch_t ch, int32_t out_uv[INA3221_NUM_CH])
	Read warning shunt voltage alert limit for each channel in `ch`. More...

int	ina3221_set_shunt_voltage_sum_alert_limit (const ina3221_t *dev, int32_t in_uv)
	Set shunt voltage sum alert limit to `in_uv`. More...

int	ina3221_get_shunt_voltage_sum_alert_limit (const ina3221_t dev, int32_t out_uv)
	Read shunt voltage sum alert limit. More...

int	ina3221_set_power_valid_upper_limit (const ina3221_t *dev, int32_t in_mv)
	Set bus voltage power valid upper limit to `in_mv`. More...

int	ina3221_get_power_valid_upper_limit (const ina3221_t dev, int32_t out_mv)
	Read bus voltage power valid upper limit. More...

int	ina3221_set_power_valid_lower_limit (const ina3221_t *dev, int32_t in_mv)
	Set bus voltage power valid lower limit to `in_mv`. More...

int	ina3221_get_power_valid_lower_limit (const ina3221_t dev, int32_t out_mv)
	Read bus voltage power valid lower limit. More...

int	ina3221_read_flags (const ina3221_t dev, uint16_t flags)
	Read status flags. More...

int	ina3221_read_shunt_sum_uv (const ina3221_t dev, int32_t out_uv, uint16_t *flags)
	Read sum of shunt voltages. More...

ina3221_ch_t	ina3221_read_shunt_uv (const ina3221_t dev, int32_t out_uv[INA3221_NUM_CH], uint16_t flags)
	Read shunt voltages for each channel in `ch`. More...

ina3221_ch_t	ina3221_read_bus_mv (const ina3221_t dev, int16_t out_mv[INA3221_NUM_CH], uint16_t flags)
	Read bus voltages for each channel in `ch`. More...

void	ina3221_calculate_current_ua (ina3221_ch_t ch, const uint16_t in_mohm[INA3221_NUM_CH], const int32_t in_uv[INA3221_NUM_CH], int32_t out_ua[INA3221_NUM_CH])
	Calculate current for each channel in `ch`. More...

void	ina3221_calculate_power_uw (ina3221_ch_t ch, const int16_t in_mv[INA3221_NUM_CH], const int32_t in_ua[INA3221_NUM_CH], int32_t out_mw[INA3221_NUM_CH])
	Calculate power from bus voltage and current values. More...

Macro Definition Documentation

◆ INA3221_ENABLE_CH_MASK

#define INA3221_ENABLE_CH_MASK

Value:

                                         (INA3221_ENABLE_CH1    \
                                         | INA3221_ENABLE_CH2  \
                                         | INA3221_ENABLE_CH3)

Enable channel bit mask.

Definition at line 212 of file ina3221.h.

◆ INA3221_ENABLE_LATCH_MASK

#define INA3221_ENABLE_LATCH_MASK

Value:

(INA3221_ENABLE_WARN_LATCH \

| INA3221_ENABLE_CRIT_LATCH)

INA3221_ENABLE_WARN_LATCH

@ INA3221_ENABLE_WARN_LATCH

Enable warning alert latch.

Definition: ina3221.h:235

INA3221_ENABLE_CRIT_LATCH

@ INA3221_ENABLE_CRIT_LATCH

Enable critical alert latch.

Definition: ina3221.h:236

Enable latch bit mask.

Definition at line 241 of file ina3221.h.

◆ INA3221_ENABLE_SUM_CH_MASK

#define INA3221_ENABLE_SUM_CH_MASK

Value:

                                        (INA3221_ENABLE_SUM_CH1     \
                                        | INA3221_ENABLE_SUM_CH2   \
                                        | INA3221_ENABLE_SUM_CH3)

Enable shunt voltage sum calculation channel bit mask.

Definition at line 227 of file ina3221.h.

◆ INA3221_FLAGS_MASK

#define INA3221_FLAGS_MASK

Value:

                                         (INA3221_FLAG_CRIT_ALERT_CH1       \
                                         | INA3221_FLAG_CRIT_ALERT_CH2     \
                                         | INA3221_FLAG_CRIT_ALERT_CH3     \
                                         | INA3221_FLAG_SHUNT_SUM_ALERT    \
                                         | INA3221_FLAG_WARN_ALERT_CH1     \
                                         | INA3221_FLAG_WARN_ALERT_CH2     \
                                         | INA3221_FLAG_WARN_ALERT_CH3     \
                                         | INA3221_FLAG_POWER_VALID        \
                                         | INA3221_FLAG_TIMING_CONTROL     \
                                         | INA3221_FLAG_CONV_READY)

Flags bit mask.

Definition at line 306 of file ina3221.h.

◆ INA3221_TRIGGER_BUS

#define INA3221_TRIGGER_BUS ( dev ) ina3221_set_mode(dev, INA3221_MODE_TRIGGER_BUS_ONLY)

Set operation mode to INA3221_MODE_TRIGGER_BUS_ONLY to trigger bus voltage measurement.

Parameters

dev	Device handle

Definition at line 1089 of file ina3221.h.

◆ INA3221_TRIGGER_SHUNT

#define INA3221_TRIGGER_SHUNT ( dev ) ina3221_set_mode(dev, INA3221_MODE_TRIGGER_SHUNT_ONLY)

Set operation mode to INA3221_MODE_TRIGGER_SHUNT_ONLY to trigger shunt voltage measurement.

Parameters

dev	Device handle

Definition at line 1080 of file ina3221.h.

◆ INA3221_TRIGGER_SHUNT_AND_BUS

#define INA3221_TRIGGER_SHUNT_AND_BUS ( dev ) ina3221_set_mode(dev, INA3221_MODE_TRIGGER_SHUNT_BUS)

Set operation mode to INA3221_MODE_TRIGGER_SHUNT_BUS to trigger shunt and bus voltage measurement.

Parameters

dev	Device handle

Definition at line 1098 of file ina3221.h.

Enumeration Type Documentation

◆ ina3221_alert

enum ina3221_alert

Alert indices.

Enumerator
INA3221_ALERT_WRN	Warning alert.
INA3221_ALERT_CRT	Critical alert.
INA3221_ALERT_TC	Timing control.
INA3221_ALERT_PV	Power valid alert.

Definition at line 122 of file ina3221.h.

◆ ina3221_channel

enum ina3221_channel

Channel flags.

Enumerator
INA3221_CH1	Channel 1.
INA3221_CH2	Channel 2.
INA3221_CH3	Channel 3.

Definition at line 113 of file ina3221.h.

◆ ina3221_conv_time_bus_adc

enum ina3221_conv_time_bus_adc

ADC bus voltage conversion times.

Enumerator
INA3221_CONV_TIME_BADC_140US	140 us
INA3221_CONV_TIME_BADC_204US	204 us
INA3221_CONV_TIME_BADC_332US	332 us
INA3221_CONV_TIME_BADC_588US	588 us
INA3221_CONV_TIME_BADC_1100US	1100 us
INA3221_CONV_TIME_BADC_2116US	2116 us
INA3221_CONV_TIME_BADC_4156US	4156 us
INA3221_CONV_TIME_BADC_8244US	8244 us

Definition at line 168 of file ina3221.h.

◆ ina3221_conv_time_shunt_adc

enum ina3221_conv_time_shunt_adc

ADC shunt voltage conversion times.

Enumerator
INA3221_CONV_TIME_SADC_140US	140 us
INA3221_CONV_TIME_SADC_204US	204 us
INA3221_CONV_TIME_SADC_332US	332 us
INA3221_CONV_TIME_SADC_588US	588 us
INA3221_CONV_TIME_SADC_1100US	1100 us
INA3221_CONV_TIME_SADC_2116US	2116 us
INA3221_CONV_TIME_SADC_4156US	4156 us
INA3221_CONV_TIME_SADC_8244US	8244 us

Definition at line 150 of file ina3221.h.

◆ ina3221_dev_addr

enum ina3221_dev_addr

I2C device addresses.

Enumerator
INA3221_ADDR_00	A0 connected to GND.
INA3221_ADDR_01	A0 connected to VS
INA3221_ADDR_10	A0 connected to SDA.
INA3221_ADDR_11	A0 connected to SCL.

Definition at line 103 of file ina3221.h.

◆ ina3221_enable_ch

enum ina3221_enable_ch

Enable channel flags.

Enumerator
INA3221_ENABLE_CH1	Enable channel 1.
INA3221_ENABLE_CH2	Enable channel 2.
INA3221_ENABLE_CH3	Enable channel 3.

Definition at line 204 of file ina3221.h.

◆ ina3221_enable_latch

enum ina3221_enable_latch

Enable latch flags.

Enumerator
INA3221_ENABLE_WARN_LATCH	Enable warning alert latch.
INA3221_ENABLE_CRIT_LATCH	Enable critical alert latch.

Definition at line 234 of file ina3221.h.

◆ ina3221_enable_sum_ch

enum ina3221_enable_sum_ch

Enable shunt voltage sum calculation channel flags.

Enumerator
INA3221_ENABLE_SUM_CH1	Enable sum channel 1.
INA3221_ENABLE_SUM_CH2	Enable sum channel 2.
INA3221_ENABLE_SUM_CH3	Enable sum channel 3.

Definition at line 219 of file ina3221.h.

◆ ina3221_mode

enum ina3221_mode

Device operation modes.

Enumerator
INA3221_MODE_POWER_DOWN	Sleep mode.
INA3221_MODE_TRIGGER_SHUNT_ONLY	Trigger shunt voltage measurement only.
INA3221_MODE_TRIGGER_BUS_ONLY	Trigger bus voltage measurement only.
INA3221_MODE_TRIGGER_SHUNT_BUS	Trigger shunt and bus voltage measurement.
INA3221_MODE_POWER_DOWN_	Also power down (see datasheet)
INA3221_MODE_CONTINUOUS_SHUNT_ONLY	Continuous shunt voltage measurement only.
INA3221_MODE_CONTINUOUS_BUS_ONLY	Continuous bus voltage measurement only.
INA3221_MODE_CONTINUOUS_SHUNT_BUS	Continuous shunt and bus voltage measurement.

Definition at line 132 of file ina3221.h.

◆ ina3221_num_samples

enum ina3221_num_samples

Number of samples to calculate average shunt/bus voltage value.

Enumerator
INA3221_NUM_SAMPLES_1	1
INA3221_NUM_SAMPLES_4	4
INA3221_NUM_SAMPLES_16	16
INA3221_NUM_SAMPLES_64	64
INA3221_NUM_SAMPLES_128	128
INA3221_NUM_SAMPLES_256	256
INA3221_NUM_SAMPLES_512	512
INA3221_NUM_SAMPLES_1024	1024

Definition at line 186 of file ina3221.h.

Function Documentation

◆ ina3221_calculate_current_ua()

void ina3221_calculate_current_ua	(	ina3221_ch_t	ch,
		const uint16_t	in_mohm[INA3221_NUM_CH],
		const int32_t	in_uv[INA3221_NUM_CH],
		int32_t	out_ua[INA3221_NUM_CH]
	)

Calculate current for each channel in ch.

Parameters

[in]	ch	Flags of which values in `in_mohm` and `in_uv` are valid
[in]	in_mohm	Array of input shunt resistors in mOhm
[in]	in_uv	Array of input shunt voltage values in uV
[out]	out_ua	Array of output current values in uA

◆ ina3221_calculate_power_uw()

void ina3221_calculate_power_uw	(	ina3221_ch_t	ch,
		const int16_t	in_mv[INA3221_NUM_CH],
		const int32_t	in_ua[INA3221_NUM_CH],
		int32_t	out_mw[INA3221_NUM_CH]
	)

Calculate power from bus voltage and current values.

Parameters

[in]	ch	Flags of which values in `in_mv` and `in_ua` are valid
[in]	in_mv	Array of input bus voltage values in mV
[in]	in_ua	Array of input current values in uA
[out]	out_mw	Array of output power values in mW

◆ ina3221_config_get_conv_time_bus()

static ina3221_conv_time_bus_adc_t ina3221_config_get_conv_time_bus ( uint16_t cfg )

inlinestatic

Get bus voltage conversion time from configuration value.

Parameters

[in] cfg Configuration value

Returns: Bus conversion time

Definition at line 592 of file ina3221.h.

◆ ina3221_config_get_conv_time_shunt()

static ina3221_conv_time_shunt_adc_t ina3221_config_get_conv_time_shunt ( uint16_t cfg )

inlinestatic

Get shunt voltage conversion time from configuration value.

Parameters

[in] cfg Configuration value

Returns: Shunt conversion time

Definition at line 619 of file ina3221.h.

◆ ina3221_config_get_enabled_channels()

static ina3221_ch_t ina3221_config_get_enabled_channels ( uint16_t cfg )

inlinestatic

Get enabled measurement channels from configuration value.

Parameters

[in] cfg Configuration value

Returns: Channel flags ina3221_channel_t

Definition at line 535 of file ina3221.h.

◆ ina3221_config_get_mode()

static ina3221_mode_t ina3221_config_get_mode ( uint16_t cfg )

inlinestatic

Get operation mode from configuration value.

Parameters

[in] cfg Configuration value

Returns: Operation mode

Definition at line 646 of file ina3221.h.

◆ ina3221_config_get_num_samples()

static ina3221_num_samples_t ina3221_config_get_num_samples ( uint16_t cfg )

inlinestatic

Get number of samples from configuration value.

Parameters

[in] cfg Configuration value

Returns: Number of samples

Definition at line 565 of file ina3221.h.

◆ ina3221_config_set_conv_time_bus()

static void ina3221_config_set_conv_time_bus	(	uint16_t *	cfg,
		ina3221_conv_time_bus_adc_t	bus
	)

inlinestatic

Set bus voltage conversion time in configuration value.

Parameters

[out]	cfg	Configuration value
[in]	bus	Bus conversion time

Definition at line 603 of file ina3221.h.

◆ ina3221_config_set_conv_time_shunt()

static void ina3221_config_set_conv_time_shunt	(	uint16_t *	cfg,
		ina3221_conv_time_shunt_adc_t	shunt
	)

inlinestatic

Set shunt voltage conversion time in configuration value.

Parameters

[out]	cfg	Configuration value
[in]	shunt	Shunt conversion time

Definition at line 630 of file ina3221.h.

◆ ina3221_config_set_enabled_channels()

static void ina3221_config_set_enabled_channels	(	uint16_t *	cfg,
		ina3221_ch_t	ch
	)

inlinestatic

Enable measurement channels in configuration value.

Parameters

[out]	cfg	Configuration value
[in]	ch	Channel flags ina3221_channel_t

Definition at line 548 of file ina3221.h.

◆ ina3221_config_set_mode()

static void ina3221_config_set_mode	(	uint16_t *	cfg,
		ina3221_mode_t	mode
	)

inlinestatic

Set operation mode in configuration value.

Parameters

[out]	cfg	Configuration value
[in]	mode	Operation mode

Definition at line 657 of file ina3221.h.

◆ ina3221_config_set_num_samples()

static void ina3221_config_set_num_samples	(	uint16_t *	cfg,
		ina3221_num_samples_t	ns
	)

inlinestatic

Set number of samples in configuration value.

Parameters

[out]	cfg	Configuration value
[in]	ns	Number of samples

Definition at line 576 of file ina3221.h.

◆ ina3221_disable_alert()

int ina3221_disable_alert	(	ina3221_t *	dev,
		ina3221_alert_t	alert
	)

Disable alert alert.

Parameters

[in,out]	dev	Device handle
[in]	alert	Alert index

Returns: 0, on success; -ERANGE, if alert was out of bounds; -ENUTSUP, if alert pin was initialized with GPIO_UNDEF

◆ ina3221_disable_critical_alert()

static int ina3221_disable_critical_alert ( ina3221_t * dev )

inlinestatic

Wrapper around ina3221_disable_alert, to disable critical alert.

Parameters

[in,out] dev Device handle

Returns

See also: ina3221_disable_alert

Definition at line 495 of file ina3221.h.

◆ ina3221_disable_power_valid_alert()

static int ina3221_disable_power_valid_alert ( ina3221_t * dev )

inlinestatic

Wrapper around ina3221_disable_alert, to disable power valid alert.

Parameters

[in,out] dev Device handle

Returns

See also: ina3221_disable_alert

Definition at line 521 of file ina3221.h.

◆ ina3221_disable_timing_control_alert()

static int ina3221_disable_timing_control_alert ( ina3221_t * dev )

inlinestatic

Wrapper around ina3221_disable_alert, to disable timing control alert.

Parameters

[in,out] dev Device handle

Returns

See also: ina3221_disable_alert

Definition at line 508 of file ina3221.h.

◆ ina3221_disable_warning_alert()

static int ina3221_disable_warning_alert ( ina3221_t * dev )

inlinestatic

Wrapper around ina3221_disable_alert, to disable warning alert.

Parameters

[in,out] dev Device handle

Returns

See also: ina3221_disable_alert

Definition at line 482 of file ina3221.h.

◆ ina3221_enable_alert()

int ina3221_enable_alert	(	ina3221_t *	dev,
		ina3221_alert_t	alert,
		ina3221_alert_cb_t	cb,
		void *	arg
	)

Enable alert and set callback and argument for alert alert.

Parameters

[in,out]	dev	Device handle
[in]	alert	Alert index
[in]	cb	Alert callback
[in]	arg	Alert callback argument

Returns: 0, on success; -ERANGE, if alert was out of bounds; -ENUTSUP, if alert pin was initialized with GPIO_UNDEF

◆ ina3221_enable_critical_alert()

static int ina3221_enable_critical_alert	(	ina3221_t *	dev,
		ina3221_alert_cb_t	cb,
		void *	arg
	)

inlinestatic

Wrapper around ina3221_enable_alert, to enable critical alert.

Parameters

[in,out]	dev	Device handle
[in]	cb	Alert callback
[in]	arg	Alert callback argument

Returns

See also: ina3221_enable_alert

Definition at line 421 of file ina3221.h.

◆ ina3221_enable_power_valid_alert()

static int ina3221_enable_power_valid_alert	(	ina3221_t *	dev,
		ina3221_alert_cb_t	cb,
		void *	arg
	)

inlinestatic

Wrapper around ina3221_enable_alert, to enable power valid alert.

Parameters

[in,out]	dev	Device handle
[in]	cb	Alert callback
[in]	arg	Alert callback argument

Returns

See also: ina3221_enable_alert

Definition at line 455 of file ina3221.h.

◆ ina3221_enable_timing_control_alert()

static int ina3221_enable_timing_control_alert	(	ina3221_t *	dev,
		ina3221_alert_cb_t	cb,
		void *	arg
	)

inlinestatic

Wrapper around ina3221_enable_alert, to enable timing control alert.

Parameters

[in,out]	dev	Device handle
[in]	cb	Alert callback
[in]	arg	Alert callback argument

Returns

See also: ina3221_enable_alert

Definition at line 438 of file ina3221.h.

◆ ina3221_enable_warning_alert()

static int ina3221_enable_warning_alert	(	ina3221_t *	dev,
		ina3221_alert_cb_t	cb,
		void *	arg
	)

inlinestatic

Wrapper around ina3221_enable_alert, to enable warning alert.

Parameters

[in,out]	dev	Device handle
[in]	cb	Alert callback
[in]	arg	Alert callback argument

Returns

See also: ina3221_enable_alert

Definition at line 404 of file ina3221.h.

◆ ina3221_get_config()

int ina3221_get_config	(	const ina3221_t *	dev,
		uint16_t *	cfg
	)

Read currently saved configuration register value.

Parameters

[in]	dev	Device handle
[out]	cfg	Pointer to configuration register output value

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs

◆ ina3221_get_conv_time_bus_adc()

static void ina3221_get_conv_time_bus_adc	(	const ina3221_t *	dev,
		ina3221_conv_time_bus_adc_t *	ctb
	)

inlinestatic

Read currently applied bus voltage ADC conversion time.

Parameters

[in]	dev	Device handle
[out]	ctb	Pointer to bus voltage ADC conversion time output variable

Definition at line 760 of file ina3221.h.

◆ ina3221_get_conv_time_shunt_adc()

static void ina3221_get_conv_time_shunt_adc	(	const ina3221_t *	dev,
		ina3221_conv_time_shunt_adc_t *	cts
	)

inlinestatic

Read currently applied shunt voltage ADC conversion time.

Parameters

[in]	dev	Device handle
[out]	cts	Pointer to shunt voltage ADC conversion time output variable

Definition at line 786 of file ina3221.h.

◆ ina3221_get_crit_alert_limit()

ina3221_ch_t ina3221_get_crit_alert_limit	(	const ina3221_t *	dev,
		ina3221_ch_t	ch,
		int32_t	out_uv[INA3221_NUM_CH]
	)

Read critical shunt voltage alert limit for each channel in ch.

Parameters

[in]	dev	Device handle
[in]	ch	Channel flags ina3221_channel_t
[out]	out_uv	Output array of shunt voltage alert limits in uV

Returns: Flags of which channel´s values were written to out_uv

◆ ina3221_get_enable_channel()

static void ina3221_get_enable_channel	(	const ina3221_t *	dev,
		ina3221_ch_t *	ch
	)

inlinestatic

Read which channels are currently enabled.

Parameters

[in]	dev	Device handle
[out]	ch	Channel flags ina3221_channel_t

Definition at line 709 of file ina3221.h.

◆ ina3221_get_enable_sum_channel()

int ina3221_get_enable_sum_channel	(	const ina3221_t *	dev,
		ina3221_ch_t *	ch
	)

Read enabled channels for shunt voltage sum calculation.

Parameters

[in]	dev	Device handle
[out]	ch	Channel flags ina3221_channel_t

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs

◆ ina3221_get_latch()

int ina3221_get_latch	(	const ina3221_t *	dev,
		bool *	warn,
		bool *	crit
	)

Read enabled latches for critical/warning alert pins.

Parameters

[in]	dev	Device handle
[in]	warn	Will be true if warning alert is latched
[in]	crit	Will be true if critical alert is latched

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs

◆ ina3221_get_mode()

static void ina3221_get_mode	(	const ina3221_t *	dev,
		ina3221_mode_t *	mode
	)

inlinestatic

Read currently applied device operation mode.

Parameters

[in]	dev	Device handle
[out]	mode	Pointer to device operation mode output variable

Definition at line 811 of file ina3221.h.

◆ ina3221_get_num_samples()

static void ina3221_get_num_samples	(	const ina3221_t *	dev,
		ina3221_num_samples_t *	ns
	)

inlinestatic

Read currently applied number of samples.

Parameters

[in]	dev	Device handle
[out]	ns	Pointer to number of samples output variable

Definition at line 734 of file ina3221.h.

◆ ina3221_get_power_valid_lower_limit()

int ina3221_get_power_valid_lower_limit	(	const ina3221_t *	dev,
		int32_t *	out_mv
	)

Read bus voltage power valid lower limit.

Parameters

[in]	dev	Device handle
[out]	out_mv	Pointer to bus voltage power valid lower limit output variable

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs

◆ ina3221_get_power_valid_upper_limit()

int ina3221_get_power_valid_upper_limit	(	const ina3221_t *	dev,
		int32_t *	out_mv
	)

Read bus voltage power valid upper limit.

Parameters

[in]	dev	Device handle
[out]	out_mv	Pointer to bus voltage power valid upper limit output variable

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs

◆ ina3221_get_shunt_voltage_sum_alert_limit()

int ina3221_get_shunt_voltage_sum_alert_limit	(	const ina3221_t *	dev,
		int32_t *	out_uv
	)

Read shunt voltage sum alert limit.

Parameters

[in]	dev	Device handle
[out]	out_uv	Pointer to sum voltage sum alert limit output variable

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs

◆ ina3221_get_warn_alert_limit()

ina3221_ch_t ina3221_get_warn_alert_limit	(	const ina3221_t *	dev,
		ina3221_ch_t	ch,
		int32_t	out_uv[INA3221_NUM_CH]
	)

Read warning shunt voltage alert limit for each channel in ch.

Parameters

[in]	dev	Device handle
[in]	ch	Channel flags ina3221_channel_t
[out]	out_uv	Output array of shunt voltage alert limits in uV

Returns: Flags of which channel´s values could be read

◆ ina3221_init()

int ina3221_init	(	ina3221_t *	dev,
		const ina3221_params_t *	params
	)

Initialize device.

Parameters

[out]	dev	Device handle
[in]	params	Device parameters

Returns: 0, on success; -EFAULT, if NULL pointer was passed; -EIO, if I2C bus acquirement failed; -ENXIO, if manufacturer ID or DIE ID does not match; -ENODEV, if reset failed; -EINVAL, if configuration could not be applied; See i2c_read_regs; See i2c_write_regs

◆ ina3221_read_bus_mv()

ina3221_ch_t ina3221_read_bus_mv	(	const ina3221_t *	dev,
		int16_t	out_mv[INA3221_NUM_CH],
		uint16_t *	flags
	)

Read bus voltages for each channel in ch.

Parameters

[in]	dev	Device handle
[out]	out_mv	Array of output bus voltage values in mV
[out]	flags	Pointer to flags output variable, may be NULL

Returns: Flags of which channel´s bus voltage values could be read

◆ ina3221_read_flags()

int ina3221_read_flags	(	const ina3221_t *	dev,
		uint16_t *	flags
	)

Read status flags.

Parameters

[in]	dev	Device handle
[out]	flags	Pointer to flags output variable

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs

◆ ina3221_read_shunt_sum_uv()

int ina3221_read_shunt_sum_uv	(	const ina3221_t *	dev,
		int32_t *	out_uv,
		uint16_t *	flags
	)

Read sum of shunt voltages.

Parameters

[in]	dev	Device handle
[out]	out_uv	Pointer to shunt voltage sum output variable
[out]	flags	Pointer to flags output variable, may be NULL

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs

◆ ina3221_read_shunt_uv()

ina3221_ch_t ina3221_read_shunt_uv	(	const ina3221_t *	dev,
		int32_t	out_uv[INA3221_NUM_CH],
		uint16_t *	flags
	)

Read shunt voltages for each channel in ch.

Parameters

[in]	dev	Device handle
[out]	out_uv	Array of output shunt voltage values in uV
[out]	flags	Pointer to flags output variable, may be NULL

Returns: Flags of which channel´s shunt voltage drops could be read

◆ ina3221_reset()

int ina3221_reset ( ina3221_t * dev )

Reset device, i.e.

apply default configuration

Parameters

[in,out] dev Device handle

Returns: 0, on success; -EIO, if I2C bus acquirement failed; -ENODEV, if device could not be reset; See i2c_read_regs; See i2c_write_regs

◆ ina3221_set_config()

int ina3221_set_config	(	ina3221_t *	dev,
		uint16_t	cfg
	)

Write configuration register value to configuration register.

Parameters

[in,out]	dev	Device handle
[in]	cfg	Configuration register value

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_write_regs

◆ ina3221_set_conv_time_bus_adc()

int ina3221_set_conv_time_bus_adc	(	ina3221_t *	dev,
		ina3221_conv_time_bus_adc_t	ctb
	)

Update conversion time of bus voltage ADC and write to configuration register.

Parameters

[in,out]	dev	Device handle
[in]	ctb	Bus voltage conversion time

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs; See i2c_write_regs

◆ ina3221_set_conv_time_shunt_adc()

int ina3221_set_conv_time_shunt_adc	(	ina3221_t *	dev,
		ina3221_conv_time_shunt_adc_t	cts
	)

Update conversion time of shunt voltage ADC and write to configuration register.

Parameters

[in,out]	dev	Device handle
[in]	cts	Shunt voltage conversion time value

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs; See i2c_write_regs

◆ ina3221_set_crit_alert_limit()

ina3221_ch_t ina3221_set_crit_alert_limit	(	const ina3221_t *	dev,
		ina3221_ch_t	ch,
		int32_t	in_uv
	)

Set critical shunt voltage alert limit to in_uv for each channel in ch.

Parameters

[in]	dev	Device handle
[in]	ch	Channel flags ina3221_channel_t
[in]	in_uv	Critical shunt voltage limit in uV

Returns: Flags of which channel´s limits could be updated

◆ ina3221_set_enable_channel()

int ina3221_set_enable_channel	(	ina3221_t *	dev,
		ina3221_ch_t	ch
	)

Enable channels.

Parameters

[in,out]	dev	Device handle
[in]	ch	Channel flags ina3221_channel_t

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs; See i2c_write_regs

◆ ina3221_set_enable_sum_channel()

int ina3221_set_enable_sum_channel	(	const ina3221_t *	dev,
		ina3221_ch_t	ch
	)

Enable channels for shunt voltage sum calculation.

Parameters

[in]	dev	Device handle
[in]	ch	Channel flags ina3221_channel_t

Note: The channel must also have been enabled with ina3221_set_enable_channel

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs; See i2c_write_regs

◆ ina3221_set_latch()

int ina3221_set_latch	(	const ina3221_t *	dev,
		bool	warn,
		bool	crit
	)

Enable latches for critical/warning alert pins.

Parameters

[in]	dev	Device handle
[in]	warn	Enable warning alert latch
[in]	crit	Enable critical alert latch

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs; See i2c_write_regs

◆ ina3221_set_mode()

int ina3221_set_mode	(	ina3221_t *	dev,
		ina3221_mode_t	mode
	)

Update device operation mode.

Parameters

[in,out]	dev	Device handle
[in]	mode	Operation mode value

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs; See i2c_write_regs

◆ ina3221_set_num_samples()

int ina3221_set_num_samples	(	ina3221_t *	dev,
		ina3221_num_samples_t	ns
	)

Update number of samples and write to configuration register.

Parameters

[in,out]	dev	Device handle
[in]	ns	Number of samples

Returns: 0, on success; -EIO, if I2C bus acquirement failed; See i2c_read_regs; See i2c_write_regs

◆ ina3221_set_power_valid_lower_limit()

int ina3221_set_power_valid_lower_limit	(	const ina3221_t *	dev,
		int32_t	in_mv
	)

Set bus voltage power valid lower limit to in_mv.

Parameters

[in]	dev	Device handle
[in]	in_mv	Bus voltage power valid lower limit in mV

Returns: 0, on success; -ERANGE, if in_mv was not in [INA3221_MIN_BUS_MV; INA3221_MAX_BUS_MV]; -EIO, if I2C bus acquirement failed; See i2c_write_regs

◆ ina3221_set_power_valid_upper_limit()

int ina3221_set_power_valid_upper_limit	(	const ina3221_t *	dev,
		int32_t	in_mv
	)

Set bus voltage power valid upper limit to in_mv.

Parameters

[in]	dev	Device handle
[in]	in_mv	Bus voltage power valid upper limit in mV

Returns: 0, on success; -ERANGE, if in_mv was not in [INA3221_MIN_BUS_MV; INA3221_MAX_BUS_MV]; -EIO, if I2C bus acquirement failed; See i2c_write_regs

◆ ina3221_set_shunt_voltage_sum_alert_limit()

int ina3221_set_shunt_voltage_sum_alert_limit	(	const ina3221_t *	dev,
		int32_t	in_uv
	)

Set shunt voltage sum alert limit to in_uv.

Parameters

[in]	dev	Device handle
[in]	in_uv	Shunt voltage sum limit in uV

Returns: 0, on success; -ERANGE, if in_uv was not in [INA3221_MIN_SHUNT_SUM_UV; INA3221_MAX_SHUNT_SUM_UV]; -EIO, if I2C bus acquirement failed; See i2c_write_regs

◆ ina3221_set_warn_alert_limit()

ina3221_ch_t ina3221_set_warn_alert_limit	(	const ina3221_t *	dev,
		ina3221_ch_t	ch,
		int32_t	in_uv
	)

Set warning shunt voltage alert limit to in_uv for each channel in ch.

Parameters

[in]	dev	Device handle
[in]	ch	Channel flags ina3221_channel_t
[in]	in_uv	Warning shunt voltage limit in uV

Returns: Flags of which channel´s limits could be updated

Detailed Description

Files

Data Structures

Macros

Typedefs

Enumerations

Functions

Macro Definition Documentation

◆ INA3221_ENABLE_CH_MASK

◆ INA3221_ENABLE_LATCH_MASK

◆ INA3221_ENABLE_SUM_CH_MASK

◆ INA3221_FLAGS_MASK

◆ INA3221_TRIGGER_BUS

◆ INA3221_TRIGGER_SHUNT

◆ INA3221_TRIGGER_SHUNT_AND_BUS

Enumeration Type Documentation

◆ ina3221_alert

◆ ina3221_channel

◆ ina3221_conv_time_bus_adc

◆ ina3221_conv_time_shunt_adc

◆ ina3221_dev_addr

◆ ina3221_enable_ch

◆ ina3221_enable_latch

◆ ina3221_enable_sum_ch

◆ ina3221_mode

◆ ina3221_num_samples

Function Documentation

◆ ina3221_calculate_current_ua()

◆ ina3221_calculate_power_uw()

◆ ina3221_config_get_conv_time_bus()

◆ ina3221_config_get_conv_time_shunt()

◆ ina3221_config_get_enabled_channels()

◆ ina3221_config_get_mode()

◆ ina3221_config_get_num_samples()

◆ ina3221_config_set_conv_time_bus()

◆ ina3221_config_set_conv_time_shunt()

◆ ina3221_config_set_enabled_channels()

◆ ina3221_config_set_mode()

◆ ina3221_config_set_num_samples()

◆ ina3221_disable_alert()

◆ ina3221_disable_critical_alert()

◆ ina3221_disable_power_valid_alert()

◆ ina3221_disable_timing_control_alert()

◆ ina3221_disable_warning_alert()

◆ ina3221_enable_alert()

◆ ina3221_enable_critical_alert()

◆ ina3221_enable_power_valid_alert()

◆ ina3221_enable_timing_control_alert()

◆ ina3221_enable_warning_alert()

◆ ina3221_get_config()

◆ ina3221_get_conv_time_bus_adc()

◆ ina3221_get_conv_time_shunt_adc()

◆ ina3221_get_crit_alert_limit()

◆ ina3221_get_enable_channel()

◆ ina3221_get_enable_sum_channel()

◆ ina3221_get_latch()

◆ ina3221_get_mode()

◆ ina3221_get_num_samples()

◆ ina3221_get_power_valid_lower_limit()

◆ ina3221_get_power_valid_upper_limit()

◆ ina3221_get_shunt_voltage_sum_alert_limit()

◆ ina3221_get_warn_alert_limit()

◆ ina3221_init()

◆ ina3221_read_bus_mv()

◆ ina3221_read_flags()

◆ ina3221_read_shunt_sum_uv()

◆ ina3221_read_shunt_uv()

◆ ina3221_reset()

◆ ina3221_set_config()

◆ ina3221_set_conv_time_bus_adc()

◆ ina3221_set_conv_time_shunt_adc()

◆ ina3221_set_crit_alert_limit()

◆ ina3221_set_enable_channel()

◆ ina3221_set_enable_sum_channel()

◆ ina3221_set_latch()

◆ ina3221_set_mode()

◆ ina3221_set_num_samples()

◆ ina3221_set_power_valid_lower_limit()

◆ ina3221_set_power_valid_upper_limit()

◆ ina3221_set_shunt_voltage_sum_alert_limit()