epd_bw_spi_params_t Struct Reference

SPI display device initialisation parameters. More...

Detailed Description

SPI display device initialisation parameters.

Definition at line 84 of file epd_bw_spi.h.

#include <epd_bw_spi.h>

Data Fields
spi_t	spi
	SPI device that the display is connected to.
spi_clk_t	spi_clk
	SPI clock speed to use.
gpio_t	cs_pin
	pin connected to the CHIP SELECT line
gpio_t	dc_pin
	pin connected to the DC line
gpio_t	rst_pin
	pin connected to the reset line (optional)
gpio_t	busy_pin
	pin connected to the busy line (optional)
bool	busy_value
	expected value for the busy pin when the display is busy
bool	dummy
	if device requires a dummy cycle before read
epd_bw_spi_controller_t	controller
	display controller of the e-Paper display
epd_bw_spi_entry_mode_t	entry_mode
	data entry mode
uint16_t	size_x
	number of horizontal pixels in the display
uint16_t	size_y
	number of vertical pixels in the display
uint16_t	partial_refresh_max
	maximum number of partial refreshes to perform before triggering a full refresh

---

The documentation for this struct was generated from the following file:

• drivers/include/epd_bw_spi.h