78 #define MODE_ACTIVE_SHIFT             (0U) 
   79 #define MODE_AUTOWAKE_SHIFT           (3U) 
   80 #define MODE_AUTOSLEEP_SHIFT          (4U) 
   81 #define MODE_PRESCALE_SHIFT           (5U) 
   82 #define MODE_INTERRUPT_DEFAULT        (0x40)  
   84 #define MMA7660_INTSOURCE_NONE        (0x00) 
   85 #define MMA7660_INTSOURCE_FB          (0x01) 
   86 #define MMA7660_INTSOURCE_UDLR        (0x02) 
   87 #define MMA7660_INTSOURCE_TAP         (0x04) 
   88 #define MMA7660_INTSOURCE_AUTOSLEEP   (0x08) 
   89 #define MMA7660_INTSOURCE_MEASURE     (0x10) 
   90 #define MMA7660_INTSOURCE_SHX         (0x20) 
   91 #define MMA7660_INTSOURCE_SHY         (0x40) 
   92 #define MMA7660_INTSOURCE_SHZ         (0x80) 
   94 #define MMA7660_SR_AMPD               (0x00) 
   95 #define MMA7660_SR_AM64               (0x01) 
   96 #define MMA7660_SR_AM32               (0x02) 
   97 #define MMA7660_SR_AM16               (0x03) 
   98 #define MMA7660_SR_AM8                (0x04) 
   99 #define MMA7660_SR_AM4                (0x05) 
  100 #define MMA7660_SR_AM2                (0x06) 
  101 #define MMA7660_SR_AM1                (0x07) 
  102 #define MMA7660_SR_AW32               (0x00) 
  103 #define MMA7660_SR_AW16               (0x08) 
  104 #define MMA7660_SR_AW8                (0x10) 
  105 #define MMA7660_SR_AW1                (0x18) 
  106 #define MMA7660_PDET_X                (0x20) 
  107 #define MMA7660_PDET_Y                (0x40) 
  108 #define MMA7660_PDET_Z                (0x80) 
  110 #define MMA7660_ADDR                  (0x4C) 
  115 #define MMA7660_MG_PER_COUNT          (47U) 
  146                      uint8_t autowake, uint8_t autosleep, uint8_t prescale);
 
int mma7660_read_tilt(const mma7660_t *dev, uint8_t *res)
Read the tilt register.
int mma7660_config_samplerate(const mma7660_t *dev, uint8_t amsr, uint8_t awsr, uint8_t filt)
Configure the sample rate.
int mma7660_set_mode(const mma7660_t *dev, uint8_t active, uint8_t autowake, uint8_t autosleep, uint8_t prescale)
Set the mode register.
int mma7660_read_counts(const mma7660_t *dev, int8_t *x, int8_t *y, int8_t *z)
Read the acceleration counts (unconverted)
int mma7660_init(mma7660_t *dev, const mma7660_params_t *params)
Initialize an MMA7660 device.
int mma7660_read(const mma7660_t *dev, mma7660_data_t *data)
Read the acceleration counts converted to mG.
int mma7660_write_sleep_count(const mma7660_t *dev, uint8_t sleep)
Write the sleep count register.
int mma7660_config_pd(const mma7660_t *dev, uint8_t pd)
Configure the tap detection debounce count.
int mma7660_config_pdet(const mma7660_t *dev, uint8_t pdth, uint8_t enabled_axes)
Configure the tap detection.
int mma7660_config_interrupts(const mma7660_t *dev, uint8_t isource_flags)
Configure the interrupt sources.
@ MMA7660_READ_ERR
error when reading counts
@ MMA7660_I2C_WRITE_ERR
i2c bus cannot be written
@ MMA7660_I2C_ERR
i2c bus initialization error
@ MMA7660_I2C_READ_ERR
i2c bus cannot be read
uint_fast8_t i2c_t
Default i2c_t type definition.
Low-level I2C peripheral driver interface definition.
Data type for the result data.
int16_t x
acceleration in X direction
int16_t y
acceleration in Y direction
int16_t z
acceleration in Z direction
Parameters for an MMA7660 device.
uint8_t amsr
active mode sample rate
uint8_t addr
the device I2C address
uint8_t awsr
auto wake sample rate
uint8_t filt
filter samples
Device descriptor for an MMA7660 device.
mma7660_params_t params
initialization parameters