periph_conf.h

Go to the documentation of this file.

/*
 * SPDX-FileCopyrightText: 2023 Gunar Schorcht <gunar@schorcht.net>
 * SPDX-License-Identifier: LGPL-2.1-only
 */
 
#pragma once
 
#include "macros/units.h"
 
#ifndef CONFIG_BOARD_HAS_HXTAL
#define CONFIG_BOARD_HAS_HXTAL  1   
#endif
 
#ifndef CONFIG_BOARD_HAS_LXTAL
#define CONFIG_BOARD_HAS_LXTAL  1   
#endif
 
#ifndef CONFIG_CLOCK_HXTAL
#define CONFIG_CLOCK_HXTAL      MHZ(8)      
#endif
 
#ifndef I2C_DEV_1_USED
#define I2C_DEV_1_USED          1   
#endif
 
#include "periph_cpu.h"
#include "periph_common_conf.h"
 
#include "cfg_spi_default.h"
#include "cfg_uart_default.h"
#include "cfg_usbdev_default.h"
 
#ifdef __cplusplus
extern "C" {
#endif
 
static const i2c_conf_t i2c_config[] = {
    {
        .dev            = I2C1,
        .speed          = I2C_SPEED_NORMAL,
        .scl_pin        = GPIO_PIN(PORT_B, 10),
        .sda_pin        = GPIO_PIN(PORT_B, 11),
        .rcu_mask       = RCU_APB1EN_I2C1EN_Msk,
        .irqn           = I2C1_EV_IRQn,
    }
};
 
#define I2C_NUMOF   ARRAY_SIZE(i2c_config)
static const adc_conf_t adc_config[] = {
    { .pin = GPIO_PIN(PORT_A, 1), .dev = 0, .chan = 1 },
    { .pin = GPIO_PIN(PORT_A, 2), .dev = 0, .chan = 2 },
    { .pin = GPIO_PIN(PORT_A, 3), .dev = 0, .chan = 3 },
    { .pin = GPIO_PIN(PORT_A, 4), .dev = 0, .chan = 4 },
    { .pin = GPIO_PIN(PORT_A, 5), .dev = 0, .chan = 5 },
    { .pin = GPIO_PIN(PORT_A, 6), .dev = 0, .chan = 6 },
    /* ADC Temperature channel */
    { .pin = GPIO_UNDEF, .dev = 0, .chan = 16 },
    /* ADC VREF channel */
    { .pin = GPIO_UNDEF, .dev = 0, .chan = 17 },
};
 
#define ADC_NUMOF           ARRAY_SIZE(adc_config)
static const timer_conf_t timer_config[] = {
    {
        .dev      = TIMER0,
        .max      = 0x0000ffff,
        .rcu_mask = RCU_APB2EN_TIMER0EN_Msk,
        .bus      = APB2,
        .irqn     = TIMER0_Channel_IRQn
    },
    {
        .dev      = TIMER1,
        .max      = 0x0000ffff,
        .rcu_mask = RCU_APB1EN_TIMER1EN_Msk,
        .bus      = APB1,
        .irqn     = TIMER1_IRQn
    },
    /* TIMER2 and TIMER3 are used for PWM pins */
    {
        .dev      = TIMER4,
        .max      = 0x0000ffff,
        .rcu_mask = RCU_APB1EN_TIMER4EN_Msk,
        .bus      = APB1,
        .irqn     = TIMER4_IRQn
    }
};
 
#define TIMER_0_IRQN        TIMER0_Channel_IRQn
#define TIMER_1_IRQN        TIMER1_IRQn
#define TIMER_2_IRQN        TIMER4_IRQn
 
#define TIMER_NUMOF         ARRAY_SIZE(timer_config)
static const pwm_conf_t pwm_config[] = {
    {
        .dev      = TIMER2,
        .rcu_mask = RCU_APB1EN_TIMER2EN_Msk,
        .chan     = {
                        { .pin = GPIO_PIN(PORT_B, 5), .cc_chan = 1 },
                        { .pin = GPIO_PIN(PORT_B, 0), .cc_chan = 2 },
                        /* unused channels have to be defined by GPIO_UNDEF */
                        { .pin = GPIO_UNDEF, .cc_chan = 0 },
                        { .pin = GPIO_UNDEF, .cc_chan = 3 },
                    },
        .af       = GPIO_AF_OUT_PP,
        .bus      = APB1,
    },
    {
        .dev      = TIMER3,
        .rcu_mask = RCU_APB1EN_TIMER3EN_Msk,
        .chan     = {
                        { .pin = GPIO_PIN(PORT_B, 7), .cc_chan = 1 },
                        { .pin = GPIO_PIN(PORT_B, 8), .cc_chan = 2 },
                        /* unused channels have to be defined by GPIO_UNDEF */
                        { .pin = GPIO_UNDEF, .cc_chan = 0 },
                        { .pin = GPIO_UNDEF, .cc_chan = 3 },
                    },
        .af       = GPIO_AF_OUT_PP,
        .bus      = APB1,
    },
};
 
#define PWM_NUMOF ARRAY_SIZE(pwm_config)
#ifdef __cplusplus
}
#endif