Default configuration for BME680 device driver. More...

Detailed Description

Default configuration for BME680 device driver.

Author: Dylan Laduranty dylan.nosp@m..lad.nosp@m.urant.nosp@m.y@me.nosp@m.sotic.nosp@m..com; Gunar Schorcht gunar.nosp@m.@sch.nosp@m.orcht.nosp@m..net

#include "board.h"
#include "bme680.h"
#include "saul_reg.h"

Include dependency graph for bme680_params.h:

Macros
#define	BME680_NUMOF ARRAY_SIZE(bme680_params)
	The number of configured sensors.

Variables
static const bme680_params_t	bme680_params []
	Configure params for BME680. More...

static const saul_reg_info_t	bme680_saul_info []
	Additional meta information to keep in the SAUL registry. More...

Set default configuration parameters for the BME680
#define	BME680_PARAM_I2C_DEV (I2C_DEV(0))

#define	BME680_PARAM_I2C_ADDR (BME680_I2C_ADDR_2)

#define	BME680_PARAM_SPI_DEV (SPI_DEV(0))

#define	BME680_PARAM_SPI_NSS_PIN GPIO_PIN(0, 5)

#define	BME680_PARAMS_I2C
	Defaults I2C parameters if none provided. More...

#define	BME680_PARAMS_SPI
	Defaults SPI parameters if none provided. More...

#define	BME680_SAUL_INFO { .name = "bme680" }
	Default SAUL meta information.

Macro Definition Documentation

◆ BME680_PARAMS_I2C

#define BME680_PARAMS_I2C

Value:

{                                                       \
        .ifsel              = BME680_I2C_INTF,          \
        .temp_os            = BME680_OS_8X,             \
        .hum_os             = BME680_OS_2X,             \
        .pres_os            = BME680_OS_4X,             \
        .filter             = BME680_FILTER_SIZE_3,     \
        .gas_measure        = BME680_ENABLE_GAS_MEAS,   \
        .heater_dur         = 320,                      \
        .heater_temp        = 150,                      \
        .settings           = BME680_OST_SEL |          \
                              BME680_OSP_SEL |          \
                              BME680_OSH_SEL |          \
                              BME680_FILTER_SEL |       \
                              BME680_GAS_SENSOR_SEL,    \
        .intf.i2c.dev   = BME680_PARAM_I2C_DEV,         \
        .intf.i2c.addr  = BME680_PARAM_I2C_ADDR,        \
}

Defaults I2C parameters if none provided.

Definition at line 59 of file bme680_params.h.

◆ BME680_PARAMS_SPI

#define BME680_PARAMS_SPI

Value:

{                                                       \
        .ifsel              = BME680_SPI_INTF,          \
        .temp_os            = BME680_OS_8X,             \
        .hum_os             = BME680_OS_2X,             \
        .pres_os            = BME680_OS_4X,             \
        .filter             = BME680_FILTER_SIZE_3,     \
        .gas_measure        = BME680_ENABLE_GAS_MEAS,   \
        .heater_dur         = 320,                      \
        .heater_temp        = 150,                      \
        .settings           = BME680_OST_SEL |          \
                              BME680_OSP_SEL |          \
                              BME680_OSH_SEL |          \
                              BME680_FILTER_SEL |       \
                              BME680_GAS_SENSOR_SEL,    \
        .intf.spi.dev       = BME680_PARAM_SPI_DEV,     \
        .intf.spi.nss_pin   = BME680_PARAM_SPI_NSS_PIN, \
}

Defaults SPI parameters if none provided.

Definition at line 81 of file bme680_params.h.

Variable Documentation

◆ bme680_params

const bme680_params_t bme680_params[]

static

Initial value:

=
{
 
    BME680_PARAMS_I2C,
 
    BME680_PARAMS_SPI,
 
}

Configure params for BME680.

Definition at line 116 of file bme680_params.h.

◆ bme680_saul_info

const saul_reg_info_t bme680_saul_info[]

static

Initial value:

=
{
    BME680_SAUL_INFO
}

Additional meta information to keep in the SAUL registry.

Definition at line 129 of file bme680_params.h.