sam0 SD Host Controller

SD card interface functions for sam0 class devices. More...

Detailed Description

SD card interface functions for sam0 class devices.

Warning

This driver is deprecated. Use the sdmmc driver module instead. You can refer to the `same54-xpro´ board as an example on how to use it.

Modules
	MTD wrapper for SAM0 SDHC devices
	Driver for SD Cards connected to the SAM0 SDHC peripheral using the MTD interface.

Files
file	sdhc.h
	SD card interface functions for sam0 class devices.

Data Structures
struct	sdhc_state_t
	SD Card driver context. More...

Macros
#define	SD_MMC_BLOCK_SIZE   512
	This SD stack uses the maximum block size authorized (512 bytes) More...
#define	SDHC_SLOW_CLOCK_HZ   400000
	Clock frequency on init.
#define	SDHC_FAST_CLOCK_HZ   25000000
	Clock frequency after init.

Functions
int	sdhc_init (sdhc_state_t *state)
	Initialize the SD host controller. More...
bool	sdhc_send_cmd (sdhc_state_t *state, uint32_t cmd, uint32_t arg)
	Send a command to the SD card. More...
int	sdhc_read_blocks (sdhc_state_t *state, uint32_t block, void *dst, uint16_t num)
	Read blocks from the SD card into memory. More...
int	sdhc_write_blocks (sdhc_state_t *state, uint32_t block, const void *src, uint16_t num)
	Write memory to SD card blocks. More...
int	sdhc_erase_blocks (sdhc_state_t *state, uint32_t block, uint16_t num)
	Erase memory from SD card blocks. More...

Card Types
#define	CARD_TYPE_UNKNOWN   (0)
	Unknown type card.
#define	CARD_TYPE_SD   (1 << 0)
	SD card.
#define	CARD_TYPE_MMC   (1 << 1)
	MMC card.
#define	CARD_TYPE_SDIO   (1 << 2)
	SDIO card.
#define	CARD_TYPE_HC   (1 << 3)
	High capacity card.
#define	CARD_TYPE_SD_COMBO   (CARD_TYPE_SD | CARD_TYPE_SDIO)
	SD combo card (io + memory)

Card Versions
#define	CARD_VER_UNKNOWN   (0)
	Unknown card version.
#define	CARD_VER_SD_1_0   (0x10)
	SD version 1.0 and 1.01.
#define	CARD_VER_SD_1_10   (0x1A)
	SD version 1.10.
#define	CARD_VER_SD_2_0   (0X20)
	SD version 2.00.
#define	CARD_VER_SD_3_0   (0X30)
	SD version 3.0X.
#define	CARD_VER_MMC_1_2   (0x12)
	MMC version 1.2.
#define	CARD_VER_MMC_1_4   (0x14)
	MMC version 1.4.
#define	CARD_VER_MMC_2_2   (0x22)
	MMC version 2.2.
#define	CARD_VER_MMC_3   (0x30)
	MMC version 3.
#define	CARD_VER_MMC_4   (0x40)
	MMC version 4.

Flags used to define MCI parser for SD/MMC command
#define	MCI_RESP_PRESENT   (1ul << 8)
	Have response.
#define	MCI_RESP_136   (1ul << 11)
	136 bit response
#define	MCI_RESP_CRC   (1ul << 12)
	Expect valid crc.
#define	MCI_RESP_BUSY   (1ul << 13)
	Card may send busy.
#define	MCI_CMD_OPENDRAIN   (1ul << 14)
	Open drain for a broadcast command.
#define	MCI_CMD_WRITE   (1ul << 15)
	To signal a data write operation.
#define	MCI_CMD_SDIO_BYTE   (1ul << 16)
	To signal a SDIO transfer in multi byte mode.
#define	MCI_CMD_SDIO_BLOCK   (1ul << 17)
	To signal a SDIO transfer in block mode.
#define	MCI_CMD_STREAM   (1ul << 18)
	To signal a data transfer in stream mode.
#define	MCI_CMD_SINGLE_BLOCK   (1ul << 19)
	To signal a data transfer in single block mode.
#define	MCI_CMD_MULTI_BLOCK   (1ul << 20)
	To signal a data transfer in multi block mode.

Macro Definition Documentation

SD_MMC_BLOCK_SIZE

#define SD_MMC_BLOCK_SIZE   512

This SD stack uses the maximum block size authorized (512 bytes)

SD card block size

Definition at line 95 of file sdhc.h.

Function Documentation

sdhc_erase_blocks()

int sdhc_erase_blocks	(	sdhc_state_t *	state,
		uint32_t	block,
		uint16_t	num
	)

Erase memory from SD card blocks.

Erases n 512 byte blocks on the SD card

Parameters

[in]	state	driver context
[in]	block	first block number to erase
[in]	num	number of blocks to erase

Returns

0 if success, negative error if failed

sdhc_init()

int sdhc_init

(

sdhc_state_t *

state

)

Initialize the SD host controller.

Parameters

[in]

state

driver context

Returns

int 0 on success, error otherwise

sdhc_read_blocks()

int sdhc_read_blocks	(	sdhc_state_t *	state,
		uint32_t	block,
		void *	dst,
		uint16_t	num
	)

Read blocks from the SD card into memory.

Reads n 512 byte blocks from the SD card

Parameters

[in]	state	driver context
[in]	block	block number to read from
[out]	dst	destination address
[in]	num	number of blocks to read

Returns

0 if success, negative error if failed

sdhc_send_cmd()

bool sdhc_send_cmd	(	sdhc_state_t *	state,
		uint32_t	cmd,
		uint32_t	arg
	)

Send a command to the SD card.

Parameters

[in]	state	driver context
[in]	cmd	the command code
[in]	arg	command argument

Returns

true command was successful

false command returned error

sdhc_write_blocks()

int sdhc_write_blocks	(	sdhc_state_t *	state,
		uint32_t	block,
		const void *	src,
		uint16_t	num
	)

Write memory to SD card blocks.

Writes n 512 bytes blocks on the SD card

Parameters

[in]	state	driver context
[in]	block	block number to write to
[in]	src	pointer to memory to write
[in]	num	number of blocks to write

Returns

0 if success, negative error if failed