XBee driver

High-level driver for the XBee S1 802.15.4 modem. More...

Detailed Description

High-level driver for the XBee S1 802.15.4 modem.

Files
file	xbee.h
	High-level driver for the XBee S1 802.15.4 modem.
file	xbee_params.h
	Default configuration for XBee devices.

Data Structures
struct	xbee_params_t
	Configuration parameters for XBee devices. More...
struct	xbee_t
	XBee device descriptor. More...
struct	xbee_l2hdr_t
	Data structure for extraction L2 information of received packets. More...

Macros
#define	XBEE_MAX_PAYLOAD_LENGTH   (100U)
	Maximum payload length that can be send.
#define	XBEE_MAX_PKT_LENGTH   (115U)
	Maximum packet length, including XBee API frame overhead.
#define	XBEE_MAX_RESP_LENGTH   (16U)
	Maximum length of a command response.
#define	XBEE_MAX_TXHDR_LENGTH   (14U)
	Maximal possible size of a TX header.
#define	XBEE_DEFAULT_PROTOCOL   (GNRC_NETTYPE_SIXLOWPAN)
	Default protocol for data that is coming in.
#define	XBEE_DEFAULT_PANID   (CONFIG_IEEE802154_DEFAULT_PANID)
	Default PAN ID used after initialization.
#define	XBEE_DEFAULT_CHANNEL   (CONFIG_IEEE802154_DEFAULT_CHANNEL)
	Default channel used after initialization.

Enumerations
enum	xbee_rx_state_t {   XBEE_INT_STATE_IDLE , XBEE_INT_STATE_SIZE1 , XBEE_INT_STATE_SIZE2 , XBEE_INT_STATE_TYPE ,   XBEE_INT_STATE_RESP , XBEE_INT_STATE_RX }
	States of the internal FSM for handling incoming UART frames. More...

Functions
void	xbee_setup (xbee_t *dev, const xbee_params_t *params)
	Prepare the given Xbee device. More...
int	xbee_build_hdr (xbee_t *dev, uint8_t *xhdr, size_t payload_len, void *dst_addr, size_t addr_len)
	Put together the internal proprietary XBee header. More...
int	xbee_parse_hdr (xbee_t *dev, const uint8_t *xhdr, xbee_l2hdr_t *l2hdr)
	Extract IEEE802.15.4 L2 header information from the XBee header. More...

Variables
const netdev_driver_t	xbee_driver
	Reference to the XBee driver interface.

Address flags
#define	XBEE_ADDR_FLAGS_LONG   (0x80)
	Use long addresses if not otherwise defined when set, use short addresses when unset.

Enumeration Type Documentation

xbee_rx_state_t

enum xbee_rx_state_t

States of the internal FSM for handling incoming UART frames.

Incoming data frames on the UART interfaces are handled using a finite state machine (FSM) in the UARTs RX interrupt handler. The FSM is needed to extract frame specific data as the frame size, frame type, and checksums.

Enumerator
XBEE_INT_STATE_IDLE	waiting for the beginning of a new frame
XBEE_INT_STATE_SIZE1	waiting for the first byte (MSB) of the frame size field
XBEE_INT_STATE_SIZE2	waiting for the second byte (LSB) of the frame size field
XBEE_INT_STATE_TYPE	waiting for the frame type field
XBEE_INT_STATE_RESP	handling incoming data for AT command responses
XBEE_INT_STATE_RX	handling incoming data when receiving radio packets

Definition at line 99 of file xbee.h.

Function Documentation

xbee_build_hdr()

int xbee_build_hdr	(	xbee_t *	dev,
		uint8_t *	xhdr,
		size_t	payload_len,
		void *	dst_addr,
		size_t	addr_len
	)

Put together the internal proprietary XBee header.

Parameters

[in]	dev	Xbee device to initialize
[out]	xhdr	buffer to write the header into, MUST be at least of length XBEE_MAX_TXHDR_LENGTH
[in]	payload_len	actual payload length (without the XBee header)
[in]	dst_addr	link layer (L2) destination address
[in]	addr_len	length of dst_addr in byte (MUST be 2 or 8)

Returns

the length of the created header in byte

-EOVERFLOW if payload_len is greater than XBEE_MAX_PAYLOAD_LENGTH

-ENOMSG if the given destination address has an invalid length

xbee_parse_hdr()

int xbee_parse_hdr	(	xbee_t *	dev,
		const uint8_t *	xhdr,
		xbee_l2hdr_t *	l2hdr
	)

Extract IEEE802.15.4 L2 header information from the XBee header.

Parameters

[in]	dev	Xbee device to initialize
[in]	xhdr	XBee header, starting with the API identifier
[out]	l2hdr	the L2 header information is written here

Returns

the length of the XBee header

-ENOMST if the given XBee header is invalid

xbee_setup()

void xbee_setup	(	xbee_t *	dev,
		const xbee_params_t *	params
	)

Prepare the given Xbee device.

Parameters

[out]	dev	Xbee device to initialize
[in]	params	parameters for device initialization