lcd_internal.h File Reference
Device driver implementation for the lcd display controller. More...
Detailed Description
Device driver implementation for the lcd display controller.
Definition in file lcd_internal.h.
This graph shows which files directly or indirectly include this file:Go to the source code of this file.
Macros | |
| #define | LCD_PIXSET_16BIT 0x55 |
| MCU and RGB 16 bit interface. | |
| #define | LCD_PIXSET_18BIT 0x66 |
| MCU and RGB 18 bit interface (not implemented) | |
LCD commands | |
| #define | LCD_CMD_SWRESET 0x01 |
| Software reset. | |
| #define | LCD_CMD_RDDIDIF 0x04 |
| Read display ID. | |
| #define | LCD_CMD_RDDST 0x09 |
| Read display status. | |
| #define | LCD_CMD_SLPIN 0x10 |
| Enter sleep mode. | |
| #define | LCD_CMD_SLPOUT 0x11 |
| Sleep out. | |
| #define | LCD_CMD_NORON 0x13 |
| Normal display mode on. | |
| #define | LCD_CMD_DINVOFF 0x20 |
| Display inversion off. | |
| #define | LCD_CMD_DINVON 0x21 |
| Display inversion on. | |
| #define | LCD_CMD_GAMSET 0x26 |
| Gamma Set. | |
| #define | LCD_CMD_DISPOFF 0x28 |
| Display OFF. | |
| #define | LCD_CMD_DISPON 0x29 |
| Display ON. | |
| #define | LCD_CMD_CASET 0x2A |
| Column Address Set. | |
| #define | LCD_CMD_PASET 0x2b |
| Page Address Set. | |
| #define | LCD_CMD_RAMWR 0x2c |
| Memory Write. | |
| #define | LCD_CMD_RAMRD 0x2e |
| Memory Read. | |
| #define | LCD_CMD_MADCTL 0x36 |
| Memory data access control. | |
| #define | LCD_CMD_IDMOFF 0x38 |
| Idle Mode OFF. | |
| #define | LCD_CMD_IDMON 0x39 |
| Idle Mode ON. | |
| #define | LCD_CMD_TEOFF 0x34 |
| Tearing Effect Line Off. | |
| #define | LCD_CMD_TEON 0x35 |
| Tearing Effect Line On. | |
| #define | LCD_CMD_COLMOD 0x3A |
| Interface Pixel Format Set. | |
| #define | LCD_CMD_PIXSET 0x3A |
| COLMOD: Pixel Format Set. | |
| #define | LCD_CMD_RAMWRC 0x3c |
| Memory Write Continue. | |
| #define | LCD_CMD_RAMRDC 0x3e |
| Memory Read Continue. | |
| #define | LCD_CMD_WRDISBV 0x51 |
| Write Display Brightness. | |
| #define | LCD_CMD_WRCTRLD 0x53 |
| Write Control Display. | |
| #define | LCD_CMD_RDCTRLD 0x54 |
| Read Control Display. | |
| #define | LCD_CMD_FRAMECTL1 0xb1 |
| Frame control normal. | |
| #define | LCD_CMD_FRAMECTL2 0xb2 |
| Frame control idle. | |
| #define | LCD_CMD_FRAMECTL3 0xb3 |
| Frame control partial. | |
| #define | LCD_CMD_DFUNC 0xb6 |
| Display function control. | |
| #define | LCD_CMD_PWCTRL1 0xc0 |
| Power control 1. | |
| #define | LCD_CMD_PWCTRL2 0xc1 |
| Power control 2. | |
| #define | LCD_CMD_VMCTRL1 0xc5 |
| VCOM control 1. | |
| #define | LCD_CMD_VMCTRL2 0xc7 |
| VCOM control 2. | |
| #define | LCD_CMD_PGAMCTRL 0xe0 |
| Positive gamma correction. | |
| #define | LCD_CMD_NGAMCTRL 0xe1 |
| Negative gamma correction. | |
| #define | LCD_CMD_IFCTL 0xf6 |
| Interface control. | |
