board.h File Reference
Board specific configuration for the DWM1001 dev board. More...
Detailed Description
Board specific configuration for the DWM1001 dev board.
Definition in file board.h.
#include "board_common.h"
Include dependency graph for board.h: This graph shows which files directly or indirectly include this file:Go to the source code of this file.
LED pin configuration | |
| #define | LED0_PIN GPIO_PIN(0, 30) |
| Green LED on D9. | |
| #define | LED1_PIN GPIO_PIN(0, 14) |
| Red LED on D12. | |
| #define | LED2_PIN GPIO_PIN(0, 22) |
| Red LED on D11. | |
| #define | LED3_PIN GPIO_PIN(0, 31) |
| Blue LED on D10. | |
| #define | LED_PORT (NRF_P0) |
| #define | LED0_MASK (1 << 30) |
| #define | LED1_MASK (1 << 14) |
| #define | LED2_MASK (1 << 22) |
| #define | LED3_MASK (1 << 31) |
| #define | LED_MASK (LED0_MASK | LED1_MASK | LED2_MASK | LED3_MASK) |
| #define | LED0_ON (LED_PORT->OUTCLR = LED0_MASK) |
| #define | LED0_OFF (LED_PORT->OUTSET = LED0_MASK) |
| #define | LED0_TOGGLE (LED_PORT->OUT ^= LED0_MASK) |
| #define | LED1_ON (LED_PORT->OUTCLR = LED1_MASK) |
| #define | LED1_OFF (LED_PORT->OUTSET = LED1_MASK) |
| #define | LED1_TOGGLE (LED_PORT->OUT ^= LED1_MASK) |
| #define | LED2_ON (LED_PORT->OUTCLR = LED2_MASK) |
| #define | LED2_OFF (LED_PORT->OUTSET = LED2_MASK) |
| #define | LED2_TOGGLE (LED_PORT->OUT ^= LED2_MASK) |
| #define | LED3_ON (LED_PORT->OUTCLR = LED3_MASK) |
| #define | LED3_OFF (LED_PORT->OUTSET = LED3_MASK) |
| #define | LED3_TOGGLE (LED_PORT->OUT ^= LED3_MASK) |
Button pin configuration | |
| #define | BTN0_PIN GPIO_PIN(0, 2) |
| #define | BTN0_MODE GPIO_IN_PU |
LIS2DH12 driver configuration | |
| #define | LIS2DH12_PARAM_INT_PIN1 GPIO_PIN(0, 25) |
DW1000 UWB transceiver | |
| #define | DW1000_PARAM_SPI SPI_DEV(1) |
| #define | DW1000_PARAM_CS_PIN GPIO_PIN(0, 17) |
| #define | DW1000_PARAM_INT_PIN GPIO_PIN(0, 19) |
