dwc2_usb_otg_fshs_config_t Struct Reference

USB OTG configuration. More...

Detailed Description

USB OTG configuration.

Definition at line 79 of file usbdev_synopsys_dwc2.h.

#include <usbdev_synopsys_dwc2.h>

Data Fields
uintptr_t	periph
	USB peripheral base address.
dwc2_usb_otg_fshs_type_t	type
	FS or HS type.
dwc2_usb_otg_fshs_phy_t	phy
	on-chip FS, ULPI HS or UTMI HS PHY
gpio_t	ulpi_clk
	ULPI CLK gpio.
gpio_t	ulpi_d0
	ULPI D0 gpio.
gpio_t	ulpi_d1
	ULPI D1 gpio.
gpio_t	ulpi_d2
	ULPI D2 gpio.
gpio_t	ulpi_d3
	ULPI D3 gpio.
gpio_t	ulpi_d4
	ULPI D4 gpio.
gpio_t	ulpi_d5
	ULPI D5 gpio.
gpio_t	ulpi_d6
	ULPI D6 gpio.
gpio_t	ulpi_d7
	ULPI D7 gpio.
gpio_t	ulpi_dir
	ULPI DIR gpio.
gpio_t	ulpi_stp
	ULPI STP gpio.
gpio_t	ulpi_nxt
	ULPI NXT gpio.
gpio_af_t	ulpi_af
	Alternative function for ULPI.
uint32_t	rcc_mask
	bit in clock enable register
uint8_t	irqn
	IRQ channel.
uint8_t	ahb
	AHB bus.
gpio_t	dm
	Data- gpio.
gpio_t	dp
	Data+ gpio.
gpio_af_t	af
	Alternative function.
uint32_t	phy_tune
	USB HS PHY controller tuning register value (STM32-specific), see USBPHYC_TUNE register in STM32 Reference Manual.

---

The documentation for this struct was generated from the following file:

• drivers/include/usbdev_synopsys_dwc2.h