periph_conf.h File Reference

Peripheral MCU configuration for the Microchip SAML10 & SAML11 Xplained Pro board. More...

Detailed Description

Peripheral MCU configuration for the Microchip SAML10 & SAML11 Xplained Pro board.

Author

Dylan Laduranty dylan.nosp@m..lad.nosp@m.urant.nosp@m.y@me.nosp@m.sotic.nosp@m..com

Definition in file periph_conf.h.

#include "periph_cpu.h"

Include dependency graph for periph_conf.h:

Go to the source code of this file.

#define	CLOCK_CORECLOCK   (16000000U)
	GCLK reference speed.
#define	USE_VREG_BUCK   (1)
	Enable the internal DC/DC converter The board is equipped with the necessary inductor.

Timer peripheral configuration
#define	TIMER_0_CHANNELS   2
#define	TIMER_0_ISR   isr_tc0
#define	TIMER_1_CHANNELS   2
#define	TIMER_1_ISR   isr_tc2
#define	TIMER_1_MAX_VALUE   0xffff
#define	TIMER_NUMOF   ARRAY_SIZE(timer_config)
static const tc32_conf_t	timer_config []

UART configuration
#define	UART_0_ISR   isr_sercom2_2
#define	UART_0_ISR_TX   isr_sercom2_0
#define	UART_1_ISR   isr_sercom1_2
#define	UART_1_ISR_TX   isr_sercom1_0
#define	UART_NUMOF   ARRAY_SIZE(uart_config)
static const uart_conf_t	uart_config []

PWM configuration
#define	PWM_0_EN   1
#define	PWM_1_EN   0
#define	PWM_NUMOF   ARRAY_SIZE(pwm_config)
static const pwm_conf_chan_t	pwm_chan0_config []
static const pwm_conf_t	pwm_config []

SPI configuration
#define	SPI_NUMOF   ARRAY_SIZE(spi_config)
static const spi_conf_t	spi_config []

I2C configuration
#define	I2C_NUMOF   ARRAY_SIZE(i2c_config)
static const i2c_conf_t	i2c_config []

RTC configuration
#define	EXTERNAL_OSC32_SOURCE   1
#define	ULTRA_LOW_POWER_INTERNAL_OSC_SOURCE   0

RTT configuration
#define	RTT_FREQUENCY   (32768U)

ADC Configuration
#define	ADC_PRESCALER   ADC_CTRLB_PRESCALER_DIV256
#define	ADC_NEG_INPUT   ADC_INPUTCTRL_MUXNEG(0x18u)
#define	ADC_REF_DEFAULT   ADC_REFCTRL_REFSEL_INTVCC2
#define	ADC_NUMOF   ARRAY_SIZE(adc_channels)
static const adc_conf_chan_t	adc_channels []

DAC configuration
#define	DAC_CLOCK   SAM0_GCLK_32KHZ
#define	DAC_VREF   DAC_CTRLB_REFSEL_AVCC

Variable Documentation

adc_channels

const adc_conf_chan_t adc_channels[]

static

Initial value:

= {
    
    { .inputctrl = ADC_INPUTCTRL_MUXPOS_PA10 },
}

Definition at line 238 of file periph_conf.h.

i2c_config

const i2c_conf_t i2c_config[]

static

Initial value:

= {
    {
        .dev      = &(SERCOM1->I2CM),
        .speed    = I2C_SPEED_NORMAL,
        .scl_pin  = GPIO_PIN(PA, 17),
        .sda_pin  = GPIO_PIN(PA, 16),
        .mux      = GPIO_MUX_C,
        .gclk_src = SAM0_GCLK_MAIN,
        .flags    = I2C_FLAG_NONE
    }
}

Definition at line 195 of file periph_conf.h.

pwm_chan0_config

const pwm_conf_chan_t pwm_chan0_config[]

static

Initial value:

= {
    
    { GPIO_PIN(PA, 18), GPIO_MUX_E, 0 },
    { GPIO_PIN(PA, 19), GPIO_MUX_E, 1 },
}

Definition at line 128 of file periph_conf.h.

pwm_config

const pwm_conf_t pwm_config[]

static

Initial value:

= {
 
    { .tim  = TC_CONFIG(TC2),
      .chan = pwm_chan0_config,
      .chan_numof = ARRAY_SIZE(pwm_chan0_config),
      .gclk_src = SAM0_GCLK_MAIN,
    },
 
 
 
 
 
 
 
 
 
}

Definition at line 143 of file periph_conf.h.

spi_config

const spi_conf_t spi_config[]

static

Initial value:

= {
    {
        .dev      = &(SERCOM0->SPI),
        .miso_pin = GPIO_PIN(PA,  4),
        .mosi_pin = GPIO_PIN(PA, 14),
        .clk_pin  = GPIO_PIN(PA, 15),
        .miso_mux = GPIO_MUX_D,
        .mosi_mux = GPIO_MUX_D,
        .clk_mux  = GPIO_MUX_D,
        .miso_pad = SPI_PAD_MISO_0,
        .mosi_pad = SPI_PAD_MOSI_2_SCK_3,
        .gclk_src = SAM0_GCLK_MAIN,
 
 
 
 
    }
}

Definition at line 169 of file periph_conf.h.

timer_config

const tc32_conf_t timer_config[]

static

Initial value:

= {
    {   
        .dev            = TC0,
        .irq            = TC0_IRQn,
        .mclk           = &MCLK->APBCMASK.reg,
        .mclk_mask      = MCLK_APBCMASK_TC0_Msk | MCLK_APBCMASK_TC1_Msk,
        .gclk_id        = TC0_GCLK_ID,
        .gclk_src       = SAM0_GCLK_MAIN,
        .flags          = TC_CTRLA_MODE_COUNT32,
    },
    {
        .dev            = TC2,
        .irq            = TC2_IRQn,
        .mclk           = &MCLK->APBCMASK.reg,
        .mclk_mask      = MCLK_APBCMASK_TC2_Msk,
        .gclk_id        = TC2_GCLK_ID,
        .gclk_src       = SAM0_GCLK_MAIN,
        .flags          = TC_CTRLA_MODE_COUNT16,
    }
}

Definition at line 40 of file periph_conf.h.